- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Interzone 101 is a two component, solvent free epoxy which can be applied underwater to give a corrosion and abrasion resistant coating. Intended for use as a hand-applied repair compound for application to submerged steelwork and splashzone areas of offshore jackets, piling and other permanently wet areas where conventional coatings can not be used.
Please note: this product is made to order, with a 10-working day lead time
International Interzone 101 is a two component, solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
In most circumstances International Interzone 101 is applied direct to steel and is not overcoated. Where a blast holding primer may be required then Interline 982 should be used and must be overcoated within a maximum of 10 days.
Intended Uses
- As a hand-applied repair compound for application to submerged steelwork and splashzone areas of offshore jackets, piling and other permanently wet areas where conventional coatings can not be used.
- Interzone 101 can also be used on glass reinforced materials and concrete and is suitable for use at new construction as well as maintenance.
Mixing
Only one 12 litre unit should be mixed at a time. To remove contents from their tins, cut both the top and bottom of the tin using a tin opener and push the material out. In cold weather, warming may be necessary.
Mixing should be carried out on a large, clean, smooth sheet of steel, tinplate or hardboard using palette knives, scraper blades or trowels. DO NOT ADD WATER OR THINNERS TO THE MIX as this will reduce the strength of the cured composition. The material should be thoroughly mixed until the separate yellow and blue colours have been completely merged to a bright green colour, free of yellow and blue streaks. Avoid beating air into the mixture and 'fold' the components together.
Application
International Interzone 101 is a specialist product designed for a specific end use. Detailed application instructions are available from Technical Data Sheet and Application Guidelines document both available for download from the 'Datasheets' tab above.
Data sheet
- Manufacturer
- International
- For Use On
- Steel, Concrete
- Application Method
- Trowel
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 12L
- Coverage
- 0.17m²/litre at 6000 microns
- Touch Dry
- Hard Dry 8 Hours
- UN Number
- UN3077
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Application Method
- Trowel
- Product Usage Type
- Repair
- Product Range
- Interzone
- Colour Family
- Green
Questions
Question about the product
Nguyen thanh quang on 2021-07-06 04:43:10 | Question:
Is it necessary to agitate each part or both mixed? |
Answer from Rawlins’ Technical Team:
The material should be thoroughly mixed until the separate yellow and blue colours have been completely merged to a bright green colour, free of yellow and blue streaks. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Interzone 101 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT