- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
- A high film build, high solids, abrasion resistant epoxy.
- Ideal for single coat application over hydroblasted surfaces (HB2) with tolerance to damp surfaces during application.
- Suitable for exposure to tidal sea water just 30 minutes after application (at 20ºC).
- Resistant to a wide range of chemicals.
- Excellent compatibility with sacrificial and impressed current cathodic protection systems.
- Approved to NORSOK M501 for decks (System 4), splashzone and submerged areas (System 7).
Product customisation
Don't forget to save your customization to be able to add to cartInternational Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.
International Interzone 954 is the trusted industry solution for protecting and maintaining structures operating in the most severe environments. A unique blend of properties gives Interzone 954 long term performance in environments that combine a high potential for mechanical damage, chemical attack, atmospheric corrosion and immersion conditions. This versatility makes Interzone 954 the all round heavy duty coating.
Intended Uses
- International Interzone 954 is primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. Interzone 954 has also found extensive use in a number of other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates.
- As part of a non-slip deck system in conjunction with appropriate aggregate*.
Features & Benefits
- A high film build, high solids, abrasion resistant epoxy
- Ideal for single coat application over hydroblasted surfaces (HB2) with tolerance to damp surfaces during application
- Suitable for exposure to tidal sea water just 30 minutes after application (at 20ºC [70ºF])
- Resistant to a wide range of chemicals
- Excellent compatibility with sacrificial and impressed current cathodic protection systems
- Approved to NORSOK M501 for decks (System 4), splashzone and submerged areas (System 7)
- Available in a wide range of colours
International Interzone 954 has been protecting steel in severe environments for over 25 years. With its extensive track record it has gained the industry’s trust as a unique, long term coating solution for the most challenging maintenance situations. Originally designed for the demanding protection of offshore oil and gas structures, Interzone 954’s unique blend of properties has also proven itself in a wide range of new construction applications in the mining and offshore wind power markets.
What makes International Interzone 954 a true all round solution is its ability to provide high build protection in a single coat (typically 500μm [20 mils]). Combined with its surface tolerance and early water resistance this means the impact of the painting process can be minimized allowing rapid return to service and significantly reducing downtime and labour costs compared to a standard two coat epoxy system.
International Interzone 954 offers a combination of properties meeting the challenges of protecting and maintaining structures in severe environments:
- High surface tolerance allows application over hydroblasted surfaces (HB2), even if still damp, as well as power tool and hand prepared steel surfaces (St3) for atmospheric use, this saves time and money on surface preparation
- Early resistance to tidal water movement just 30 minutes after application (at 20ºC [70ºF]), which is ideal for carrying out maintenance in splash zones or on jetty structures
- High impact and abrasion resistance, preventing corrosion caused by mechanical damage through maintaining an intact protective barrier
- Full immersion resistance to a number of aggressive chemicals such as 50% sodium hydroxide and 5% copper sulphate and good general splash and spill resistance to an even wider chemical range, including sulphuric acid, propanol, gasoline and sodium hydroxide
Its corrosion performance, versatility, and time saving value make Interzone 954 the perfect choice for protecting and maintaining a vast range of applications in the offshore, chemical and mining industries, including:
- Jetties and wharfs
- Helicopter decks and walkways when combined with a suitable aggregate
- Oil and gas platform jackets and offshore wind tower foundations
- Coal thickener tank internals and processing vessels
- Structural steel in wet, corrosive areas
Standard Colours
- 'White' is comparable to BS 4800 10 B 15
- 'Black' is comparable to RAL 9005
- 'Yellow' is comparable to RAL 1023
- 'Grey' is comparable to BS 4800 00 A 05
Chromascan Colours
- A full range of RAL and BS colours are available in this product via the Chromascan colour mixing system.
*International Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) or GPA900 (bauxite) aggregate. Application should then be to a suitably primed surface. Typical thicknesses will be between 500-1,000 microns (20-40 mils). Preferred application is by a suitable large tip hopper gun (e.g. Sagola 429 or Air texture gun fitted with a 5-10 mm nozzle). Trowel or roller can be used for small areas. Alternatively, a broadcast method of application can be used.
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- For Use On
- Metal
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Finish
- Gloss
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Product Usage Type
- Barrier Coat
- Product Range
- Interzone
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Neutral
- Colour Family
- Cream
- Colour Family
- Violet
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
Questions
Question about the product
Paul Todd. on 2022-03-17 17:05:47 | Question:
Dear Sir or Madam, Please could you advise me if lnterzone 954 can be painted onto galvanized steel (hot zinc dipped). In short will Interzone 954 adhere to zinc coated steel, or will it flake off ? I thank you for your help in this matter. Paul. |
Answer from Rawlins’ Technical Team:
For application to galvanised steel it is recommended to first sweep blast the hot dipped galvanised using non-metallic grit to create a surface profile of 25-50 microns followed by International Intergard 269 at 40 microns DFT. The Interzone 954 can then be applied over the International Intergard 269. | |
Kwan-so Choi on 2021-09-29 02:26:19 | Question:
Regarding Interzone 954, is there winter version and summer version? What is the lowest applicable temperature? |
Answer from Rawlins’ Technical Team:
There is another version of this product called International Interzone 954 (Rapid Cure), this can be applied at temperatures down to -5°C. For International Interzone 954 this can be applied at temperatures down to 10°C but the substrate temperature must be 4°C or above. | |
andrew davies on 2020-07-13 08:32:17 | Question:
Hi, the reference for Interzone 954 is EAA964 but the data sheets for Interzone 954 have it has product code EAX61M is this correct. Thankyou in advance for your assistance in this matter. Andrew. |
Answer from Rawlins’ Technical Team:
EAA964 is the product code for curing agent for Interzone 954, EAX61M is the product code for the base. | |
John Nelson on 2018-07-16 16:09:43 | Question:
Hello, Do you stock interzone 954 in a spray please? |
Answer from Rawlins’ Technical Team:
This product is only available in the pack sizes listed on our website - 5lt and 20lt tins. The product can be applied by brush, roller, air spray or airless spray. | |
Kevin on 2018-05-21 16:26:50 | Question:
Hi there, can you please advise what is the smallest quantity I can have of Interzone 954 ? plus part 2. also can you do Perfection Cream? Can you deliver to France? regards Kevin |
Answer from Rawlins’ Technical Team:
The smallest size International Interzone 954 is available is a 5lt pack. This includes 4L of Part A + 1L of Part B as sold on our website. We do not offer a product called 'Perfection Cream' and we do not export. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Interzone 954 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT