Can Sherwin-Williams M922 be applied to very high temperatures on stainless Steel

The Sherwin-Williams Macropoxy M922 data sheet states 'Macropoxy M922 may be applied by brush onto hot surfaces up to 120°C. Multiple coats will be necessary to achieve required film build. Ensure good ventilation and adequate PPE due to rapid vapourisation of solvent from the film at high temperatures.' Preparation on stainless steel should be blasting with non-metallic abrasive to ensure an adequate blast profile.

Sherwin-Williams Macropoxy M922

Reference M922

Brand Sherwin-Williams

Search ID SHE1905

Sherwin-Williams Macropoxy M922 (formerly Epigrip M922) is a high solids, 2-pack glass flake epoxy pigmented with micronised glass flake and anti-corrosives to provide anti-corrosive protection of blast cleaned steel and cathodically protected steel. Macropoxy M922 possess excellent abrasion resistance and has excellent resistance to immersion in sea water and a range of chemicals.

Please Note: Dark Grey and Bright Yellow are made to order subject to a minimum order quantity of 300L and an extended lead time of up to 7 working days.

Please note: Colours shown are for illustrative purposes only

Colour

Pick a Colour

Current colour: Black

Black
Black
Off White
Off White
Light Grey
Light Grey
Dark Grey
Dark Grey
Bright Yellow (M922)
Bright Yellow (M922)
Golden Yellow (M922)
Golden Yellow (M922)
Pale Yellow (M922)
Pale Yellow (M922)

Size

Finish

£172.21(incl. VAT)

£143.51(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

1 question about the product

Description

Sherwin-Williams Macropoxy M922 (formerly Epigrip M922) is a high solids, 2-pack glass flake epoxy pigmented with micronised glass flake and anti-corrosives to provide anti-corrosive protection of blast cleaned steel and cathodically protected steel.

Sherwin-Williams Macropoxy M922 possess excellent abrasion resistance and has excellent resistance to immersion in sea water and a range of chemicals. For immersed structures a suitable primer may be required. An aluminium mastic version is available for high build brushing maintenance - see Sherwin-Williams Macropoxy M922M.

Endorsements

Complies with BS5493:1977 - Table 4K -Type KP1A
Independently approved for Cathodic Disbondment to BGE/PS/CW6:Part 1
Approved to Def Stan 80-97 Treatment of Fuel Tanks
Highways Agency Item No. 123
Network Rail Item No. 7.2.3
Approved for carriage of grain
Complies with NORSOK M501 Rev. 5 System 7

Recommended Primers

Primers are optional. M922 can be applied directly onto steel.

Macropoxy M111 Wet Blast Primer
Macropoxy L574 Blast Primer

Recommended Topcoats

Indefinitely self overcoatable provided the coating has been suitably cleaned. For optimum intercoat adhesion with other epoxy topcoats, overcoating should occur within 14 days. Where atmospheric exposure is required overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum d.f.t. of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days.

These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.

For overcoating outside the above parameters and with alkyd systems, consult the Technical Department for advice.

Product Details

Reference 1905-272116

Data sheet

Manufacturer: Sherwin-Williams
For Use By: Industrial Use
For Use On: Steel
Application Method: Brush, Spray
Sheen: Matt
Colour: Standard / Ready Mixed
VOC Levels: Low (50-149 g/l)
Single, Two or Three Pack: Two-Pack
Product Certifications: Complies with BS5493:1977 - Table 4K -Type KP1A, Independently approved for Cathodic Disbondment to BGE/PS/CW6:Part 1, Approved to Def Stan 80-97 Treatment of Fuel Tanks
Product Certifications: Highways Agency Item No. 123, Network Rail Item No. 7.2.3, Complies with NORSOK M501 Rev. 5 System 7
Pack Size: 4L, 20L
Application: Brush, Spray
Touch Dry (at 20°C): 4 hours
Coverage: 2.1m² per litre
Touch Dry: 4 Hours
UN Number (Activator): UN3469
UN Number (Base): UN1263
Base Type: Solvent-Based
Suitable For Use On: Steel
Suitable For Use On: Primed Surfaces
Finish: Matt
Application Method: Spray
Application Method: Brush
Usages: High Solids
Usages: Chemical Resistance
Usages: Moisture Tolerant
Usages: Abrasion Resistant
Usages: Corrosion Resistance
Usages: Atmospheric
Usages: Anti-Corrosive
Usages: Immersion
Usages: Glass Flake Reinforced
Usages: Heat Resistance
Usages: Water Resistance
Usages: Direct to Metal
Product Usage Type: Topcoat
Product Range: Macropoxy
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: Grey
Product Type: Epoxy
Environment: Immersion
Environment: Atmospheric
Touch Dry/Dust Free (@ 20-25°C): 4 hours
Product Attributes: High Solids
Product Attributes: Anti-Corrosive
Product Attributes: Glass Flake Reinforced
Product Attributes: Moisture Tolerant
Resistance to: Corrosion
Resistance to: Abrasion
Resistance to: Chemicals
Resistance to: Water
Resistance to: Heat

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Ian Anderson on 2018-09-09 17:10:40	Question: Can Sherwin-Williams M922 be applied to very high temperatures on stainless Steel
	Answer from Rawlins’ Technical Team: The Sherwin-Williams Macropoxy M922 data sheet states 'Macropoxy M922 may be applied by brush onto hot surfaces up to 120°C. Multiple coats will be necessary to achieve required film build. Ensure good ventilation and adequate PPE due to rapid vapourisation of solvent from the film at high temperatures.' Preparation on stainless steel should be blasting with non-metallic abrasive to ensure an adequate blast profile.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sherwin-Williams Macropoxy M922 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

£25.93 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

Sherwin-Williams Macropoxy M922

Sherwin-Williams Macropoxy M922

Endorsements

Recommended Primers

Recommended Topcoats

Data sheet

Arnside Viaduct Case Study

Blackfriars Bridge Case Study

Macropoxy M922 Track Record

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Surface Preparation Kits for Steel