- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sherwin-Williams Acrolon 1850 is a two pack Isocyanate free finish based on an acrylic epoxy binder system. It is a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable.
- Available in 400+ colours, including RAL and BS
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Sherwin-Williams Acrolon 1850 is a two pack Isocyanate free finish based on an acrylic epoxy binder system. It is a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable.
Sherwin-Williams Acrolon 1850 is the next generation in non-isocyanate topcoats; utilising new technology, Acrolon 1850 has been principally designed for the offshore and fabric maintenance markets, where the use of isocyanates is restricted, but good coverage is desired with little downtime.
Endorsements
- Complies with Norsok M501 Rev 6 System 1 as part of a three coat system.
- Certifired for decontamination in accordance with EX07190/06/33/03.
Recommended Primers
- Compatible with a wide range of Macropoxy, Dura-plate, Zinc Clad Epoxy Primers and Buildcoats.
- ACROLON 1850 must be applied over epoxy materials within 4 days at 23°C to ensure satisfactory intercoat adhesion.
- For use with alternative undercoats please contact Sherwin- Williams
Recommended Topcoats
Sherwin-Williams Acrolon 1850 is indefinitely self-overcoatable.
Application Equipment
Airless Spray
Nozzle Size: 0.33mm (13 thou)
Fan Angle: 40°
Operating Pressure: 176kg/cm² (2500 psi)
The airless spray details given above are intended as a guide only. Details such as fluid hose length and diameter, paint temperature and job shape and size all have an effect on the spray tip and operating pressure chosen. However, the operating pressure should be the lowest possible consistent with satisfactory atomisation. As conditions will vary from job to job, it is the applicators’ responsibility to ensure that the equipment in use has been set up to give the best results. If in doubt Sherwin-Williams should be consulted.
Conventional Spray
Nozzle Size: 1.27mm (50 thou)
Atomising Pressure: 3.5kg/cm² (50 psi)
Fluid Pressure: 0.7kg/cm² (10 psi)
The details of atomising pressure, fluid pressure and nozzle size are given as a guide. It may be found that slight variations of pressure will provide optimum atomisation in some circumstances according to the set up in use. Atomising air pressure depends on the air cap in use and the fluid pressure depends on the length of line and direction of feed i.e. horizontal or vertical.
Brush
The material is suitable for brush application.
Application Conditions & Overcoating
This material should preferably be applied at temperatures in excess of 10°C In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C.
At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.
Application at ambient air temperatures below 5°C is not recom- mended.
Steelwork coated with ACROLON 1850 Special Finish should be protected from weather for 6 hours after application.
Product Details
1907-862206
Data sheet
- For Use By
- Industrial Use
- For Use On
- Steel
- Application Method
- Brush, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 60 mins
- Coverage
- 2.94m² per litre
- Touch Dry
- 1 Hour
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Isocyanate Free/Non-Isocyanate
- Product Usage Type
- Topcoat
- Product Usage Type
- Binder
- Product Range
- Acrolon
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Urethane Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Flexibility
- Product Attributes
- Tough / Durable
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sherwin-Williams Acrolon 1850 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
