Follow us on:

Sherwin-Williams Kem-Kromik 530 | Available in 400+ Colours
Sherwin-Williams Kem-Kromik 530 | Available in 400+ Colours
Sherwin-Williams Leighs C530

Sherwin-Williams Kem-Kromik 530

530
SHE1931

Kem-Kromik 530 (formerly known as Sherwin-Williams C530 or as Leighs C530) is a high quality, quick drying, lead free single pack alkyd gloss finish for interior and exterior surfaces, ideally suited for equipment manufacturers and for structural steelwork. Kem-Kromik 530 possesses excellent gloss and colour retention and outstanding durability.

  • Available in 400+ colours, including RAL and BS

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£118.43(incl. VAT)
£98.69(ex. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Kem-Kromik 530 (formerly known as Sherwin-Williams C530 or as Leighs C530) is a high quality, quick drying, lead free single pack alkyd gloss finish for interior and exterior surfaces, ideally suited for equipment manufacturers and for structural steelwork. Kem-Kromik 530 possesses excellent gloss and colour retention and outstanding durability, and can be applied by brush, roller, conventional and airless sprayers.



Recommended Primers/Topcoats




Endorsements


BS476 Part 7 - Surface Spread of Flame material - For details of substrate/scheme, consult our Technical Department.

Surface Preparation


Ensure surfaces to be coated are dry and free from all visible traces of surface contaminants.

Application Equipment


Can be applied by brush and roller, as well as conventional and airless sprayers:

Airless Spray

  • Nozzle Size: 0.33mm (13 thou)
  • Fan Angle: 65°
  • Operating Pressure: 155kg/cm² (2200 psi)

The airless spray details given above are intended as a guide only. Details such as fluid hose length and diameter, paint temperature and job shape and size all have an effect on the spray tip and operating pressure chosen. However, the operating pressure should be the lowest possible consistent with satisfactory atomisation. As conditions will vary from job to job, it is the applicators’ responsibility to ensure that the equipment in use has been set up to give the best results. If in doubt our technical team should be consulted.

Conventional Spray

  • Nozzle Size: 1.27mm (50 thou)
  • Atomising Pressure: 3.5kg/cm² (50 psi)
  • Fluid Pressure: 0.7kg/cm² (10 psi)

The details of atomising pressure, fluid pressure and nozzle size are given as a guide. It may be found that slight variations of pressure will provide optimum atomisation in some circumstances according to the set up in use. Atomising air pressure depends on the air cap in use and the fl uid pressure depends on the length of line and direction of feed i.e. horizontal or vertical.

For application by conventional spray, thin up to 5% with Cleanser/Thinner No.1. Wet film thickness should be adjusted accordingly. NB - Thinning will affect VOC compliance.



Application Conditions & Overcoating


In conditions of high relative humidity, i.e. 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C.

At application temperatures below 10°C, drying times will be signifi cantly extended, and spraying characteristics may be impaired.

Application at ambient air temperatures below 5°C is not recommended.



Additional Notes


This material is somewhat thixotropic to enable easy brush application. Any skin that may form on the surface of the paint in the container should be removed carefully to avoid the necessity of sieving the paint.

Numerical values quoted for physical data may vary slightly from batch to batch.

Certain shades for example, yellows, oranges and reds may require additional coats to achieve full opacity.



Typical Thickness and Coverage


Dry film thickness

30 microns

Wet film thickness

60 microns

Theoretical coverage

17.0m² /ltr*

*This figure makes no allowance for surface profile, uneven application, overspray or losses in containers and equipment. Film thickness will vary depending on actual use and specification.



Practical Application Rates


Microns per coat

Airless Spray Conventional Sprayer Brush Roller
Dry 45* 30 15-30 15-25
Wet 90 60 30-60 30-50

* Maximum sag tolerance with overlap typically 100μm wet (50μm dry) by airless spray



Average Drying Times


15°C 23°C
To touch 4 hours 2 hours
To recoat: 5 hours 3 hours
To handle 5 hours 3 hours

These figures are given as a guide only. Factors such as air movement and humidity must also be considered.

Product Details
1931-861197

Data sheet

For Use By
Industrial Use
For Use On
Steel
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
2 hours
Coverage
17m² per litre
Touch Dry
2 Hours
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Steel
Suitable For Use On
Primed Surfaces
Finish
Gloss
Application Method
Brush
Application Method
Roller
Application Method
Spray
Usages
Colour Retention
Usages
Atmospheric
Usages
Tough/Durable
Usages
Gloss Retention
Product Usage Type
Topcoat
Product Range
Kem-Kromik
Colour Family
Black
Colour Family
Magnolia
Colour Family
White
Colour Family
Anthracite Grey
Colour Family
Neutral
Colour Family
Cream
Colour Family
Violet
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Off-White
Environment
Atmospheric
Touch Dry/Dust Free (@ 20-25°C)
2 hours
Product Attributes
Colour Retention
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sherwin-Williams Kem-Kromik 530 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery