- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
Jotun Jotacote Universal N10 is a two component polyamine cured pure epoxy coating that is a fast drying, abrasion resistant, high solids, high build product. It is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. It is suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrates and can be applied at sub zero surface temperatures.
Typically used on exterior and interior areas, including outside hulls, superstructures, decks, cargo holds and water ballast tanks. Jotun Jotacote Universal N10 has very high flexibility making it specially suitable for the temperature variation experienced in crude oil, chemical and shuttle tankers. Approved for PSPC cross over testing with a wide range of shop primers.
Approvals and Certificates
- Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
- Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87)
- Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics
Additional certificates and approvals may be available on request.
Features & Benefits
- Full universality
- IMO PSPC for WBT/COT approved
- Lower VOC
- Fast drying
- Low temperature applicable
Full Universality
- Can be used on all-round vessels including cargo holds, water ballast tanks, crude oil tanks, outside hull, superstructure
- PSPC for water ballast tanks according to IMO Res. MSC 82 (215)
- PSPC for crude oil tanks according to IMO Res. MSC 288 (87)
- When the approved BWTS systems are operated correctly and the active species’ concentration is not above 10 ppm, no detrimental effect on correctly applied and cured Jotacote Universal N10 is observed.
High Productivity
- Fast drying at low temperatures
- Year round workability with one curing agent, down to -15°C
- Good application on low profile and non-ferrous substrates
Long-term Protection
- Protect your asset with low life cycle cost
- Ensure longevity service of water ballast tanks and cargo oil tanks
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Aluminium, Carbon Steel, Galvanized Steel, Shop Primed Steel, Stainless Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82), Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87), Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics
- Pack Size
- 20L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 2 hours
- Coverage
- 2.4-9.6m² per litre
- Touch Dry
- 2 Hours
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Decks
- Suitable For Use On
- Hulls
- Suitable For Use On
- Superstructures
- Suitable For Use On
- Cargo Holds
- Suitable For Use On
- Tankers
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Compatible Existing Coatings
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Shop Primed Steel
- Suitable For Use On
- Coated Surfaces
- Suitable For Use On
- Atmospheric Environments
- Suitable For Use On
- Immersed Environments
- Suitable For Use On
- Water Ballast Tanks
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Immersion
- Usages
- 1 Coat
- Usages
- Direct to Metal
- Usages
- High Solids
- Usages
- High Build
- Usages
- Abrasion Resistant
- Usages
- Low Temperature
- Usages
- Atmospheric
- Product Usage Type
- Primer & Topcoat
- Product Range
- Jotacote
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Aluminium
- Categorised As
- Metal Paints > Low Temperature Direct-to-Metal Paints
- Seasonal
- Cold Weather
- Product Type
- Epoxy
- Environment
- Low Temperature
- Environment
- Immersion
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Product Attributes
- 1 coat
- Product Attributes
- High Build
- Product Attributes
- High Solids
- Resistance to
- Abrasion
Questions
Question about the product
Mark Blasky on 2024-09-13 21:04:31 | Question:
I have just gone through an osmosis treatment and we are going to use intermix micron csc bottom paint. The yard doing the work just put on Jotacote UNI 10 as a primer coat. Will I have any compatibility problems. Thanks in advance for your feedback. |
Answer from Rawlins’ Technical Team:
As the topcoat is from another manufacturer, you would need to test on a small area for compatibility and adhesion prior to full application, or use a Jotun product instead. Please can you provide more information to [email protected] so we can assist with a recommendation. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Jotacote Universal N10 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT