- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sika FerroGard 903+ is a surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete.
Features and Benefits
- Complies to principle 11 of EN 1504-9 method 11.3 (applying inhibitor to the concrete)
- Does not change the appearance of the concrete structure
- Does not alter the water vapour diffusion properties of concrete
- Long term protection and durability
Please Note: 1000KG pack side isd available on a 5-7 Working Day delivery option only
Sika FerroGard 903+ is a surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete and is an improved formulation of the original Sika FerroGard 903. Sika FerroGard 903+ is based on organic compounds and penetrates the concrete and forms a protective monomolecular layer on the surface of the reinforcing steel.
Protection with Sika FerroGard 903+ both delays the start of corrosion and reduces the corrosion rate. Corrosion protection with Sika FerroGard 903+ increases the service and maintenance life cycles by up to 15 years when used as a part of a complete Sika Concrete Repair and Protection System.
Recommended Uses
- For the corrosion protection of steel reinforced concrete structures above and below the ground
- As a corrosion control treatment for undamaged reinforced concrete where reinforcing steel is corroding, or is at risk from corrosion due to the effects of carbonated or chloride contaminated concrete
- Sika FerroGard 903+ is especially suitable for extending the service life of aesthetically valuable fair-faced concrete surfaces such as historic structures
Further Features
- Can be applied to the surface of existing repairs and to surrounding areas to prevent the development of incipient anodes
- Protects both, cathodic (principle 9) and anodic (principle 11) zones of reinforcing steel
- Can be applied where other repair/prevention options are not viable
- Economic extension of the service life of reinforced concrete structures
- Easy, economical application, renewable
- Can be used as part of a simple yet effective concrete repair and protection system
- Penetration depth can be tested on site using the Sika “Qualitative Analysis Test” refer to your local Technical Service Department for details
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- For Use On
- Reinforced Concrete
- Colour
- Clear
- Pack Size
- 25KG
1000KG - Max. Application Temperature
- 40°C
- Min. Application Temperature
- 5°C
- Density
- ~ 1.04 (at +20°C)
- UN Number
- UN2491
- Consumption
- ~0.500 kg/m² (~480ml/m²)
- Viscosity
- ~ 24 mPa. s
- pH
- ~ 10
- Suitable For Use On
- Reinforced Concrete
- Manufacturer
- Sika
- Components
- 1K
- Usages
- Corrosion Management
- Product Usage Type
- Concrete Repair
Questions
Question about the product
Sharon Cockcroft on 2022-01-21 08:58:15 | Question:
What is the coverage of a 25kg pail of Sika FerroGard 903+ |
Answer from Rawlins’ Technical Team:
As this is a penetrative product the coverage can vary, but generally 0.5kg per m² so 25kg will cover approximately 50m². | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika FerroGard 903+ is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT