- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc) roofs etc.
Tor Elastascrim FT (SS6000140) is a non-flammable, semi-elastic, putty-like butyl rubber based strip encapsulant/sealant. Supplied in roll form on siliconised paper release backing for use as a formable pre-coat encapsulant and sealant over roof sheet bolts etc. Also usable as a lap joint gap filler/sealer on sheeted (profile metal, fibre-cement etc) roofs etc.
Preparation
Ensure all fixings and surfaces are sound, clean, dry, oil-free and dust free. Lightly abrade hard coatings and plastics. Mechanically remove corrosion, chalking, etc. from metal and surrounding surfaces. Treat porous surfaces with a suitable Tor primer/stabilising solution and allow to through-dry before applying Elastascrim FT. Bare metal surfaces should be correctly prepared and primed with suitable materials conducive to the type/condition of the surface and the intended protective system and allowed to through-dry before applying Elastascrim FT.
Ensure (by trial application if necessary) that all contact surfaces are suitable for application and adhesion of primers (where applicable) and Elastascrim FT.
Application
Unroll the tape and cut to the desired length. Encapsulate protrusions (bolts etc.) by placing centrally over the detail then press and mould firmly and tightly into place, working well into small gaps etc and finish smoothly and firmly onto the surrounding surface.
For gap filling, rework the compound into a “rounded” strip then place and press firmly and as far as possible into the prepared gap. Encapsulate the joint further if necessary using Tor Elastascrim BT (SS6000118 / SS6000120) and relevant coatings to produce a fully waterproofed joint.
Data sheet
- Product Usage Type
- Sealer
- Product Range
- Tor Roofing & Cladding
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Elastascrim FT is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT