- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, providing durable, long term protection for roofs.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Tor Elastaseal Z Embedment Coat (RC140) is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating free from solvent odour. For application in conjunction with Elastamat glass fibre reinforcement as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating, free from solvent odour that provides durable, long term protection for roofs. To be used as a fully reinforced weatherproofing system.
Preparation
Inspect all surfaces to assess soundness of existing substrates or coatings. Where necessary prepare test areas. Roof surfaces must be clean, dry and free from all loose debris and be carried out before application of the coating. All areas of fungal growth, moss etc should be treated with Torkill W Fungicidal Wash (DM405) and neutralised residues removed.
Apply over Elastamat reinforced Embedment Coat (where necessary). Priming, where necessary should be carried out using suitable compatible materials. Contact Technical Department for further advice.
Application
Brush or roller. Apply at the prescribed system coverage rate to properly prepared areas. Immediately lay Elastamat glass fibre matting into applied coating, ensuring a minimum overlap of 50mm between sheets. Roll or tamp the surfaces to ensure full integration and saturation of the matting is achieved. Allow Embedment Coat to become firm before applying Elastaseal Z Top Coat(s).
Limitations
- Do not apply if rain is imminent.
- Overcoating must be carried out within the timescale stated otherwise further preparation may be necessary.
Data sheet
- Application
- Brush, Roller
- Coverage
- 0.8 - 1m² per litre
- Touch Dry
- 8 Hours
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Basecoat
- Product Range
- Elastaseal
- Product Range
- Tor Roofing & Cladding
- Colour Family
- Pink
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Elastaseal Z Embedment Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT