- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- High-quality opaque satin finish timber paint available in 4,350+ colours.
- Ideal for all exterior wood and timber substrates providing up to 12 years of weather protection.
- Developed using advanced Optilife silicone technology for high breathability and flexibility.
- Quick-drying formula, suitable for application by brush, roller, or spray.
- Ensures long-term colour stability and superior coverage.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint - Premium-Quality, Quick-Drying Paint
Provides an attractive opaque satin finish for all exterior timber. Leveraging advanced Optilife silicone technology, OT25 ensures high breathability, flexibility, and superior colour retention, offering long-lasting protection for up to 12 years.
Application Instructions
Ensure that all surfaces are clean, dry, and free from grease, loose or flaking material. For previously painted surfaces, rub down with fine waterproof abrasive paper and rinse thoroughly. Bare substrates should be abraded to enhance adhesion. Special precautions should be taken for pre-1960’s paint surfaces due to potential lead content. Apply a suitable wood preservative on new or bare timber, and a primer on resinous timbers.
Stir the product thoroughly before use. Apply by brush, roller, or spray, ensuring good ventilation. Do not apply below 8ºC or when inclement weather is expected. Under normal conditions, the paint will dry in 1-2 hours, with additional coats after 3-4 hours. Apply liberally and avoid overspreading. Generally, 2 coats are recommended for optimal results.
Storage and Safety
Store in a cool, dry place at temperatures above 5ºC. Once opened, ensure the tin is sealed tightly and stored upright to prevent spills. Avoid storing in frost-prone areas. Clean all equipment with clean, cold water immediately after use. Dispose of any waste material responsibly.
Restrictions and Limitations
Do not apply Wethertex OT25 Wood-Flex Satin Opaque Timber Paint in conditions where the temperature is below 8ºC or above 25ºC. Avoid applying on hot substrates (above 30ºC) or when heavy rain or frost is forecast. Ensure the relative humidity is below 85% during application and drying. This product is restricted to professional or industrial use only.
Refer to the downloadable data sheet for more information.
Recommended Products
For best results, we recommend using a high-quality wood preservative on bare timber before applying Wethertex OT25. Additionally, a suitable wood primer is advised for resinous timbers.
Health and Safety
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint contains a mixture of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one, which may cause an allergic reaction. Always use protective gloves and safety glasses during application. Avoid inhalation of sanding dust and ensure good ventilation. Refer to the product's Material Safety Data Sheet (MSDS) for comprehensive safety information.
Product Details
2064-902690
Data sheet
- Manufacturer
- Wethertex
- Interior / Exterior Use
- Exterior Use
- For Use On
- Timber
- Application Method
- Brush
Roller
Spray - Sheen
- Satin
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
10L - Touch Dry (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 2-4 Hours
- Fully Cured (at 20°C)
- 7-10 Days
- Coverage
- 14m² per litre
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 8°C
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Timber
- Finish
- Satin
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Wethertex
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Type of Wood Finish
- Wood Paint
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Chartwell Green
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Translucent White
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
Questions
Question about the product
Steven
on
2022-06-02 20:07:08
| Question:
Can this be applied to previously painted wooden decking? |
Answer from Rawlins’ Technical Team:
No, unfortunately this paint is not designed to be used on an area subject to traffic. Due the exposure decking receives and that it is rarely possible to paint the underside we would not recommend painting decking. | |
|
Nigel
on
2021-03-22 07:52:15
| Question:
Hi, Is the Weathertex OT25 self priming, like Allcoat, or will I need a separate undercoat/primer? Thanks |
Answer from Rawlins’ Technical Team:
No, assuming you are painting timber, it is clean, dry and sound, Zanders PF59 Stain Blocking Primer Finish should be applied prior to application. If Zinsser Allcoat Exterior is used bare timber should be primed with Zinsser Cover Stain. | |
|
Nat madden
on
2020-06-29 11:34:34
| Question:
Is this suitable for tanalised timber that's been previously painted? Would the opacity hold up well on a surface like that? |
Answer from Rawlins’ Technical Team:
Assuming the previously painted timber is clean, dry, sound and prepared as detailed in the Technical Data Sheet, Wethertex OT25 is suitable for this application. | |
|
henry
on
2020-05-18 09:58:36
| Question:
The colour I'd like to match does not have a RAL code. The cement fibre board I'm using (Cedral cement fibre board) have provided an NCS code S3005-G20Y Are you able to use this in matching up Wethertex colour products? |
Answer from Rawlins’ Technical Team:
NCS colours are no problem for us to mix this product to. We currently don't have them available to select on the website but you can call our sales team to order on 0113 2455450 (option 1) | |
|
David
on
2019-10-26 20:08:40
| Question:
What do you recommend under this for new wood, and is it available in any RAL colour? Thanks |
Answer from Rawlins’ Technical Team:
On bare timber we recommend Zanders PF59 Stain Blocking Primer Finish as a priming coat. You can click on 'Choose a colour' on the Wethertex OT25 Wood-Flex Satin Opaque Timber Paint product page to view all the RAL and BS colours we can produce in this product. | |
|
Matt Blackford
on
2019-09-03 15:08:00
| Question:
Hello I am looking at using Wethertex OT25 to paint an exterior building / cabin I am having trouble finding an RAL chart to view the colours available, we have found a shade of grey we like in the Dulux range and I wondered if you have anyway of knowing which is the closest RAL grey shade to it? The colour is Night Jewels 2 (00NN13/000) Or if you can help in how to locate an RAL colour chart? |
Answer from Rawlins’ Technical Team:
You can click on 'Choose a colour' on the Wethertex OT25 Wood-Flex Satin Opaque Timber Paint product page on the website to view all the RAL and BS colours we can produce in this product. However if you prefer we would be able to provide a close match to the Dulux colour you like if you order by telephone with our Sales Team - 0113 2455450 (option 1). | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Wethertex Textured Rollers
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below.
Price
£16.03
(incl. VAT)
In Stock and Available for Delivery