Do you have any shore hardness and elongation ratings for this topcoat?

In isolation, the Elastadeck Sealercoat has the following properties: Elongation at Break – 250-280% Tensile Strength – 2.5-3.0MPa Shore D – 15-20

I am interested in your Tordeck system to apply over existing tile floors on external balconies to a block of flats we are working on, can you please confirm the complete system we would need and furnish any application guidance you may have. Thank you, Glen Watterson.

A couple of issues with regards to coating over existing tiles; The first is to test the integrity of the tiles, obviously if the tiles underneath fail then this will bring the rest of the system up. The second is the joints within the tiles. If you were to go on with the standard Tordeck system then you are likely to see the joints through the system. You can either; Screed over the tiles prior to the standard Tordeck system or install the HD Tordeck system over the tiles with the reinforcement matting. A site visit would need to be carried out for a project of this nature, please contact us on 0113 2455450 to arrange.

I am interested in your Tordeck system to apply over existing tile floors on external balconies to a block of flats we are working on, can you please confirm the complete system we would need and furnish any application guidance you may have. Thank you, Glen Watterson.

A couple of issues with regards to coating over existing tiles; The first is to test the integrity of the tiles, obviously if the tiles underneath fail then this will bring the rest of the system up. The second is the joints within the tiles. If you were to go on with the standard Tordeck system then you are likely to see the joints through the system. You can either; Screed over the tiles prior to the standard Tordeck system or install the HD Tordeck system over the tiles with the reinforcement matting. A site visit would need to be carried out for a project of this nature, please contact us on 0113 2455450 to arrange.

Tor Elastadeck Sealer Coat

Reference 295215

Brand Tor Coatings

Search ID TOR2139

Tor Elastadeck Sealer Coat is a high solids two-pack flexible sealercoat based on a polyaspartic resin system available in 8 colours. A zero solvent odour, flexible top coat for use within the Elastadeck range to encapsulate anti-slip aggregates and provide a durable, full gloss finish. A fast-curing, hardwearing, resin flooring system, designed to waterproof and provide slip resistance to balconies and walkways.

Colour

Pick a Colour

Current colour: Graphite Grey - RAL 7024 (RC559)

Red - RAL 3003 (RC559)
Red - RAL 3003 (RC559)
Blue - RAL 5011 (RC559)
Blue - RAL 5011 (RC559)
Green - BS 14 C 59 (RC559)
Green - BS 14 C 59 (RC559)
Tan - RAL 8004 (RC559)
Tan - RAL 8004 (RC559)
Graphite Grey - RAL 7024 (RC559)
Graphite Grey - RAL 7024 (RC559)
Holly Green - RAL 6007 (RC 559)
Holly Green - RAL 6007 (RC 559)
Safety Yellow - BS 08 E 51 (RC559)
Safety Yellow - BS 08 E 51 (RC559)
Light Grey - BS 00 A 05 (RC559)
Light Grey - BS 00 A 05 (RC559)

Size

Finish

£128.87(incl. VAT)

£107.39(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

3 questions about the product

Description

Tor Elastadeck Sealer Coat is a high solids two-pack flexible sealercoat based on a polyaspartic resin system. A zero solvent odour, flexible top coat for use within the Elastadeck range to encapsulate anti-slip aggregates and provide a durable, full gloss finish.

Surface Preparation

Apply Tor Elastadeck Sealer Coat within the overcoating window of the system holding the aggregate cast (see product data sheet for details).

Application

Apply one coat by roller to give an even spread, ensuring good cover on profile peaks etc. Discharge mixed material as soon as possible to maintain workability.

Limitations

Do not apply to inadequately prepared or unsound surfaces.
This product should only be applied by Tor approved contractors (further details on request).
Surfaces must be dry during application otherwise curing defects will occur.
Temperatures above 25°C and very high humidity will reduce pot life. Application at very low temperatures will significantly retard cure.

The Tor Elastadeck Premium Balcony and Communal walkway 15 year system

Tor Elastadeck Balcony System is a Premium Balcony and Communal walkway system that is fast-curing (60-90 minutes per coat), hardwearing, resin flooring system, designed to waterproof and provide slip resistance to balconies and walkways. The system is specifically intended for use on medium to high wear areas on communal balconies and walkways. Typically, such areas will consist of bare concrete or asphalt.

The new Elastadeck system has been specifically designed for use on communal walkways and balconies. Its low odour, fast-cure formula provides a waterproofing system combined with a highly durable, slip-resistant finish. This purpose-built product allows quick and efficient installation on site, requiring less coats and less disruption in areas of foot traffic. Elastadeck is also suitable for external landings, access areas and escape routes in social housing blocks. It has also been specified for balconies and walkways in hotels and hospitals, access areas in car parks and walkways and escape areas in shopping centres.

The Elastadeck Balcony System is suitable for external walkways and balconies, usually found in:

Communal areas, landings, access areas and escape routes in social housing blocks
Balconies and walkways in hotels and hospitals
Access areas in car parks
Walkways and escape areas in shopping centres

System Features & Benefits

Low odour formula
Walkable after 60-90mins*
2-3 coat fully reinforced waterproofing membrane
Easy to apply and detail
Low textured, slip resistant finish
15 year system

*Curing times (at 20°C): 90mins for Tor Elastadeck Grit Coat only. Tor Elastadeck Sealer Coat walkable after a further 90 mins.

The System (The following specification is included for demonstrative purposes only. Always consult the Technical Department before applying. All areas should be suitably prepared according to the detailed Tor specification, prior to application.)

Primer (Only required on porous or metallic surfaces, the following options are available)

Reinforcement Matting

Tor Elastadeck Matting (SS6000829), laid and embedded within Tor Elastadeck Walkway Gritcoat (RC549) to reinforce membrane

Gritcoat

Tor Elastadeck Grit Coat (295219) for level balconies. A two-pack, low odour embedment coat with anti-slip grits added to the wet resin.

Topcoat

Tor Elastadeck Sealer Coat (295215). A two-pack, low odour resin designed to seal and encapsulate grit layer.

Edge System

Comprised of Tor Elastadeck Edge Detail Basecoat (RC543) and Tor Elastadeck Edge Detail Topcoat (RC553)

Download the Elastadeck System Data Sheet for more details

Product Details

Reference 2139-983445

Data sheet

Interior / Exterior Use: Interior & Exterior
For Use On: Concrete, Asphalt
Application Method: Roller
Sheen: Gloss
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Two-Pack
Pack Size: 2L
Application: Roller
Coverage: 4 - 5m² per litre
Touch Dry: 1 Hour
UN Number: N/A
Suitable For Use On: Concrete
Suitable For Use On: Asphalt
Finish: Gloss
Application Method: Roller
Product Usage Type: Sealer
Product Range: Elastadeck
Product Range: Tor Balcony & Masonry
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Yellow

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Sam on 2024-09-15 20:12:40	Question: Do you have any shore hardness and elongation ratings for this topcoat?
	Answer from Rawlins’ Technical Team: In isolation, the Elastadeck Sealercoat has the following properties: Elongation at Break – 250-280% Tensile Strength – 2.5-3.0MPa Shore D – 15-20

Glen Watterson on 2017-08-22 12:00:29	Question: I am interested in your Tordeck system to apply over existing tile floors on external balconies to a block of flats we are working on, can you please confirm the complete system we would need and furnish any application guidance you may have. Thank you, Glen Watterson.
	Answer from Rawlins’ Technical Team: A couple of issues with regards to coating over existing tiles; The first is to test the integrity of the tiles, obviously if the tiles underneath fail then this will bring the rest of the system up. The second is the joints within the tiles. If you were to go on with the standard Tordeck system then you are likely to see the joints through the system. You can either; Screed over the tiles prior to the standard Tordeck system or install the HD Tordeck system over the tiles with the reinforcement matting. A site visit would need to be carried out for a project of this nature, please contact us on 0113 2455450 to arrange.

Glen Watterson on 2017-08-22 12:00:29	Question: I am interested in your Tordeck system to apply over existing tile floors on external balconies to a block of flats we are working on, can you please confirm the complete system we would need and furnish any application guidance you may have. Thank you, Glen Watterson.
	Answer from Rawlins’ Technical Team: A couple of issues with regards to coating over existing tiles; The first is to test the integrity of the tiles, obviously if the tiles underneath fail then this will bring the rest of the system up. The second is the joints within the tiles. If you were to go on with the standard Tordeck system then you are likely to see the joints through the system. You can either; Screed over the tiles prior to the standard Tordeck system or install the HD Tordeck system over the tiles with the reinforcement matting. A site visit would need to be carried out for a project of this nature, please contact us on 0113 2455450 to arrange.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Tor Elastadeck Sealer Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Follow us on:

Tor Elastadeck Sealer Coat

Tor Elastadeck Sealer Coat

The Tor Elastadeck Premium Balcony and Communal walkway 15 year system

Data sheet

Elastadeck System Data Sheet

Elastadeck Walkway Topcoat TDS

Elastadeck Walkway Topcoat Base MSDS

Elastadeck Walkway Topcoat Activator MSDS

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION