- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sherwin-Williams Mordant Wash L703 (formerly known as Leighs L703/Transgard TG155) is a blue mordant solution for application onto galvanized surfaces as a chemical pre-treatment to improve the adhesion of subsequent paint systems.
Sherwin-Williams Mordant Wash L703 (formerly known as Leighs L703/Transgard TG155) is a blue mordant solution for application onto galvanized surfaces as a chemical pre-treatment to improve the adhesion of subsequent paint systems.
When applied, this solution turns bright zinc surfaces black and this colour change can be used as an indicator that the chemical reaction has taken place and the surface is suitable for overcoating.
Endorsements
Highways Agency Item No.155.
Recommended Primers/Topcoats
Macropoxy K267 MIO Finish
Topcoats must be applied within a maximum of 2 days after application of L703
Surface Preparation
Degrease in accordance with SSPC-SP1 solvent cleaning using Degreaser W500. Weathered galvanizing should be abraded to remove the passivated surface. Where galvanizing has been exposed and zinc salt formation has occurred, the surface should be washed down with clean, fresh water to remove any soluble salts, then allowed to dry before application of this product.
Additional Notes
Drying times should be considered as a guide only.
The successful painting of galvanized surfaces is a specialised area and the choice of painting system over the mordant pre-treatment is critical. Please consult Technical Team for advice on the most appropriate paint systems for specific use.
Numerical values quoted for physical data may vary slightly from batch to batch.
Data sheet
- Manufacturer
- Sherwin-Williams
- For Use By
- Industrial Use
- For Use On
- Metal
- Application Method
- Brush
- Single, Two or Three Pack
- Single
- Product Certifications
- Highways Agency Item No.155
- Pack Size
- 5L
- Application
- Brush
- Coverage
- 27.6m² per litre
- Touch Dry
- 1 Hour
- UN Number
- UN1263
- Base Type
- Solvent
- Suitable For Use On
- Galvanised Steel
- Application Method
- Brush
- Product Usage Type
- Mordant Wash
- Product Range
- Mordant Wash
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sherwin-Williams Mordant Wash L703 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT