- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed.
- Please note: This product is made to order subject to an extended lead time of 14 working days
Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed.
Tolerant to application to surfaces which may be damp or wet at the time of application. An acceptable ‘wet‘ surface is defined as a surface on which a thin film of moisture is present, but is free from running water, droplets or pooled water.
Recommended Topcoats
Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.
Data sheet
- Manufacturer
- Sherwin-Williams
- For Use By
- Industrial Use
- For Use On
- Steel, Metal
- Application Method
- Airless Spray, Spray, Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Application
- Brush, Spray
- Coverage
- 10.8m² per litre
- Touch Dry
- 15 minutes
- UN Number (Activator)
- UN3469
- UN Number (Base)
- UN1263
- Base Type
- Epoxy
- Base Type
- Solvent Based
- Suitable For Use On
- Steel
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Moisture Tolerant
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Product Usage Type
- Primer
- Product Range
- Macropoxy
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 4 hours
Questions
Question about the product
David on 2023-11-17 11:27:17 | Question:
Can M111 be used on stainless steel? |
Answer from Rawlins’ Technical Team:
Assuming the surface has been prepared in accordance with the technical datasheet/application instructions, this product could be applied to stainless steel. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sherwin-Williams Macropoxy M111 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Sherwin-Williams Acrolon 1850
Sherwin-Williams Acrolon 1850 is a two pack Isocyanate free finish based on an acrylic epoxy binder system. It is a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Available in 400+ colours, including RAL and BS Order a Colour Sample
Sherwin-Williams Cleanser/Thinner No.5
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment. Specially formulated blend of...
Sherwin-Williams Acrolon C137V2
A high performance, fast drying acrylic urethane gloss finish in 450+ colours for use where long term exterior gloss and colour retention characteristics are required. Suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes Please note: Also...
Sherwin-Williams Acrolon C237
Sherwin-Williams Acrolon C237 (formerly Resistex C237) is a high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required. It is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or...
Sherwin-Williams Acrolon 7300
Sherwin-Williams Acrolon 7300 is a high solids, tin free polyurethane, with fast drying and high gloss attributes. Acrolon 7300 can suitable for use where long term exterior gloss and colour retention characteristics are required. Gloss levels: Gloss: 70%+ Semi-Gloss - approx. 40% Available in 450+ colours Professional use only -...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...