- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by airless spray or roller, using a brush only for small areas or touching up.
- Please note: Light Grey in a 5L pack size is made to order and subject to a minimum order quantity of 200L and an extended lead time of 7 working days
- Blue* is also available in a 20L pack size subject to an extended lead time (*Minimum order quantity of 200L applies) - Please contact us on 0113 2455450 (option 1) or send a message to [email protected] for further information
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying single-component alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
Recommended Primers/Topcoats
Indefinitely overcoatable with a wide range of materials including alkyd, chlorinated rubber and vinyl systems.
Surface Preparation
Blast clean to Sa21⁄2 BS EN ISO 8501-1:2007. Average surface profile in the range 50 - 75 microns.
Manually prepared surfaces should be prepared to a minimum standard of St3 BS EN ISO 8501-1:2007 at the time of coating.
Ensure surfaces to be coated are clean, dry and free from all surface contamination.
Typical Thickness and Coverage
Dry film thickness
75 microns
Wet film thickness
138 microns
Theoretical coverage
7.2 m²/ltr*
*This figure makes no allowance for surface profile, uneven application, overspray or losses in containers and equipment. Film thickness will vary depending on actual use and specification.
Practical Application Rates
Microns per coat
Airless Spray | Roller | Brush | |
---|---|---|---|
Dry | 75* | 75 | 40 |
Wet | 138 | 138 | 74 |
* Maximum sag tolerance typically 231μm wet (125μm dry) by airless spray
Data sheet
- Manufacturer
- Sherwin-Williams
- For Use By
- Industrial Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Coverage
- 7.2m² per litre
- Touch Dry
- 15 minutes
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Steel
- Finish
- Matt
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Product Usage Type
- Primer
- Product Range
- Kem-Kromik
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Black
- Colour Family
- White
- Dry to Recoat (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sherwin-Williams Kem-Kromik 155 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT