- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Glossy grey finish.
- Rapid curing, water-based epoxy floor paint.
- For garages, warehouses, showrooms, corridors, indoor car parks, and workshops.
- Recoatable after just 3 hours.
- Excellent flow, low-odour.
- For professional use.
Rust-Oleum 5800 Epoxy Rapid WB - Professional Water-Based Floor Paint
Rust-Oleum 5800 Epoxy Rapid WB is a high-performance, water-based epoxy floor paint designed for rapid curing and a smooth, durable finish. Available in both matt and gloss finishes, this product is perfect for professional use in various industrial environments.
Applications
Suitable for a wide range of surfaces. It can be applied on cleaned, sound mineral substrates, previously coated surfaces, and even porous substrates without the need for a special primer. Ideal applications include:
- Garages
- Warehouses
- Showrooms
- Corridors
- Indoor car parks
- Workshops
Features and Benefits
- Fast curing time – recoatable after just 3 hours, traffic-ready in 24 hours.
- Water-based formulation with very low odour, making it suitable for indoor applications.
- Excellent flow and smooth finish ensure a professional look.
- Durable and long-lasting, providing excellent wear resistance.
- Easy application with brush or roller; tools can be cleaned with warm soapy water.
Application Instructions
Ensure the concrete is at least 30 days old, completely dry, and free of surface contaminants. Remove grease and oil using alkaline or high-pressure cleaning with appropriate detergents. Sand previous coatings to remove gloss and roughen the surface. For very smooth or laitance-affected concrete, abrade or etch with Surfa-Etch 108.
Stir the base thoroughly before mixing with the activator. Use the mixture within 2 hours, and apply at temperatures between 10 and 30°C with relative humidity below 85%.
Restrictions and Limitations
- Not suitable for outdoor use unless finished with a polyurethane topcoat.
- Do not use a clear coat as a finish.
- For professional use only.
Safety and Compliance
The product is classified as hazardous under Regulation (EC) 1272/2008. Can cause serious eye damage. Wear appropriate eye protection and avoid inhaling spray or mist. In case of eye contact, rinse immediately with plenty of water and seek medical advice.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Mineral Substrates
- Application Method
- Brush
Roller - Sheen
- Gloss
- Colour
- Grey
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Dry to Handle (at 20°C)
- 3 Hours
- Dry to Recoat (at 20°C)
- After 3 hours, within 5 days
- Fully Cured (at 20°C)
- 7 days (traffic possible after 24 hours)
- Coverage
- 6m² per litre
- Solids by Volume
- 48%
- VOC
- 65 g/L
- Shelf Life (from date of manufacture)
- 2 years
- Touch Dry
- 2 Hours
- Base Type
- Water-Based
- Suitable For Use On
- Showroom Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Mineral Substrates
- Suitable For Use On
- Garage Floors
- Suitable For Use On
- Workshop Floor
- Suitable For Use On
- Porous Substrates
- Suitable For Use On
- Indoor Car Parks
- Suitable For Use On
- Corridors
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Quick Drying
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Product Type
- Epoxy
Questions
Question about the product
Terry Richards on 2017-11-09 21:40:22 | Question:
Hi, I have a new 28 square meter concrete garage floor, please advise:
1. how long should I allow concrete curing time before painting?
2. Quantity & product to clean, prepare floor?
3. Quantity & product to pre seal floor?
4. Quantity & product to paint floor & number of coatings?
The rear garage wall is floor to ceiling double glazed units and paint product will therefore need to tolerate high levels UV light without dis-colouring over time. Thank you for your assistance.
|
Answer from Rawlins’ Technical Team:
Blackfriar Professional High Traffic Floor Paint is an exceptionally hard-wearing, high performance, easy-to-clean 2-pack solvent based floor coating ideal for indoor and outdoor use. Provides outstanding resistance to a wide range of chemicals. Non-yellowing, excellent colour fastness. Preparation Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. Prepared surfaces with residual oil contamination should be primed with Blackfriar Professional Oil Tolerant Primer. New concrete must be left for at least 6 months before applying Blackfriar Professional High Traffic Floor Paint. Power-floated floors should either be blast tracked or treated with Blackfriar Professional Acid Etch followed by thorough rinsing. New or exposed bare concrete should be primed with Blackfriar Professional Water Based Epoxy Floor Primer. Based on 28m² (assuming your floor is NOT power-floated) you would require; 1 x 5L Blackfriar Professional Epoxy Floor Primer | |
Rob Jones on 2017-10-09 08:56:22 | Question:
Hi there, I have a worn out garage floor that has previously been painted but now the paint has worn and lifted in places. I keep getting white powder building up even though I have tried different sealers. If I coat the floor with Everbuild 908 DPM to stop the damp rising, can I then coat with epoxy paint and if so which one would be most suitable? Or do you have a product that would do both? |
Answer from Rawlins’ Technical Team:
Remove all existing coating from floor and apply 402 Damp Proof Coating. Download all product data sheets from the 'DATASHEETS' tab and read thoroughly before use. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 5800 Epoxy Rapid WB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid
Available in light grey. For use on power-floated concrete floors, quarry tiles, and ceramic tiles. Quick adhesion, overcoatable after just 3 hours. Water-based, low odour.
Rust-Oleum Mathys 108 Surfa Etch Solution
High performance etching solution. For use on smooth concrete, masonry, galvanised steel, and aluminium. Improves adhesion of coatings. Neutralises alkaline salts. Removes 'white rust' from metal. Non-flammable. Professional use only.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...