Any good for filling rotten holes in timber wall plate on old open fronted porch which has a relatively light metal sheet roof on it

Sikadur 31 CF Rapid could be used to fill holes in timber in a generic sense assuming the wood is dry, cleaned and all loose/flaking material is removed prior to application. We can't however say whether it will solve the problems you have in this instance and it won't provide any structural benefits or prevent further rotting of the timber around it so this should be taken into account.

Hi would this be suitable for repairing cracks on a resin drive ? and also coating the drive to stop loose stones ? thanks

We would assume something like RSL Resubind CP would have been used initially to create the resin driveway when first done. You may be able to try this to see if it achieves what you are wanting but we would strongly suggest reverting back to the original contractor whole installed the drive for advice.

Can this be use to repair holes in concrete where lorries will be driving?

Sikadur 31 CF Rapid will work for small repairs and will be strong enough to withstand lorry traffic but it is all dependant on the size of the repairs. Sikadr 31 is limited to a maximum layer thickness of 30 mm. It will also need to cure for between 3-5 days to ensure it has gained at least 80% of its strength before applying loads or traffic.

Can aggregate be applied on top if this product to create a non slip surface?

Yes, kiln dried quartz aggregate can be applied whilst still live to create a mechanical key. This will also create a non-slip surface.

Hello, Is the product :- Sikadur31 CF Rapid a suitable product for sticking foam mats to an exterior tarmac playground surface, please advise? many thanks in advance.

It would be dependent on what the foam density is and its individual make up. We have had limited experience using a very dense foam type mat and Sikadur 31 CF Rapid. We would advise to carry out a small trial first to ensure a good adhesive bond and to make sure the epoxy adhesive doesn't affect the build up of the foam.

Temporarily Out-of-Stock

Sikadur 31 CF Rapid

Reference 482336 482446

Search ID SIK2332

We no longer stock this product, but can recommend Sikadur 31+ as a great alternative.

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Sikadur 31 CF Rapid is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between 5°C and 20°C.

Easy to mix and apply
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Good abrasion resistance
Impermeable to liquids and water vapour
Good chemical resistance

Quantity

Product not available

Temporarily Out of Stock

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

5 questions about the product

Product Details

Reference 482336 482446

Attachments

Download

Safety Data Sheet (Activator)

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Declaration of Conformity

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

paul on 2019-11-18 10:29:04	Question: Any good for filling rotten holes in timber wall plate on old open fronted porch which has a relatively light metal sheet roof on it
	Answer from Rawlins’ Technical Team: Sikadur 31 CF Rapid could be used to fill holes in timber in a generic sense assuming the wood is dry, cleaned and all loose/flaking material is removed prior to application. We can't however say whether it will solve the problems you have in this instance and it won't provide any structural benefits or prevent further rotting of the timber around it so this should be taken into account.

Tony Bradley on 2019-11-04 12:20:28	Question: Hi would this be suitable for repairing cracks on a resin drive ? and also coating the drive to stop loose stones ? thanks
	Answer from Rawlins’ Technical Team: We would assume something like RSL Resubind CP would have been used initially to create the resin driveway when first done. You may be able to try this to see if it achieves what you are wanting but we would strongly suggest reverting back to the original contractor whole installed the drive for advice.

Simon on 2019-10-17 11:57:53	Question: Can this be use to repair holes in concrete where lorries will be driving?
	Answer from Rawlins’ Technical Team: Sikadur 31 CF Rapid will work for small repairs and will be strong enough to withstand lorry traffic but it is all dependant on the size of the repairs. Sikadr 31 is limited to a maximum layer thickness of 30 mm. It will also need to cure for between 3-5 days to ensure it has gained at least 80% of its strength before applying loads or traffic.

Sharon Shrive on 2019-10-09 17:23:51	Question: Can aggregate be applied on top if this product to create a non slip surface?
	Answer from Rawlins’ Technical Team: Yes, kiln dried quartz aggregate can be applied whilst still live to create a mechanical key. This will also create a non-slip surface.

gary mclaughlin on 2018-10-30 13:03:38	Question: Hello, Is the product :- Sikadur31 CF Rapid a suitable product for sticking foam mats to an exterior tarmac playground surface, please advise? many thanks in advance.
	Answer from Rawlins’ Technical Team: It would be dependent on what the foam density is and its individual make up. We have had limited experience using a very dense foam type mat and Sikadur 31 CF Rapid. We would advise to carry out a small trial first to ensure a good adhesive bond and to make sure the epoxy adhesive doesn't affect the build up of the foam.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sikadur 31 CF Rapid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Follow us on:

Sikadur 31 CF Rapid

Sikadur 31 CF Rapid

Safety Data Sheet (Activator)

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION