- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- General-purpose red oxide paint.
- Primer and finish in one coat.
- For metal surfaces, both indoors and outdoors.
- Provides anticorrosive protection.
- Applicable directly to clean, rust-free steel or over a suitable primer.
Description
Teamac Duracote Red Oxide Paint
Teamac Duracote Red Oxide Paint is a versatile and durable solution designed to provide superior protection against corrosion. It combines the functionality of a primer and a finish in one single coat, streamlining the painting process and ensuring a robust, long-lasting finish.
Application and Uses
Duracote Red Oxide Paint is perfect for coating metal structures, machinery, and equipment. It can be applied directly to prepared surfaces, ensuring they are clean, dry, and free from rust. For maximum protection, it is recommended to use a suitable primer, such as Teamac Zinc Phosphate Primer, before applying this topcoat. This product is designed for use in both indoor and outdoor settings, providing reliable protection against the elements.
- Can be applied with a brush, roller, or airless spray.
- Ideal for use in harsh industrial environments where corrosion resistance is critical.
- Not suitable for use on surfaces that are not metal or those exposed to extreme temperatures.
- Ensure adequate ventilation during application and drying.
Important Considerations
It is essential to follow proper surface preparation guidelines to achieve the best results. Bare steel should be blasted to SA 2½, or mechanically cleaned if blasting is not possible. Avoid applying the product in conditions where the temperature is below the dew point, as this can affect the paint's performance. Also, ensure the area is well-ventilated to prevent inhalation of vapors.
Complementary Products
For enhanced corrosion resistance, consider using the Teamac Zinc Phosphate Primer as a base coat. This primer provides additional protection, particularly in environments with high humidity or exposure to saltwater.
Health and Safety
- UN Number: 1263
Contains volatile organic compounds (VOCs) and may cause drowsiness or dizziness. Avoid inhaling vapors and ensure proper protective equipment is worn during application. This product should be stored in a cool, well-ventilated area, away from heat sources and open flames. Refer to the safety data sheet for more detailed information.
Product Details
234-183006
Data sheet
- Manufacturer
- Teamac
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Roller, Airless Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Key Features
- All round metal protector. Self over-coatable
- Touch Dry (at 20°C)
- 5 hours
- Dry to Handle (at 20°C)
- 12 Hours
- Dry to Recoat (at 20°C)
- 12 hours or overnight
- Fully Cured (at 20°C)
- 5 - 7 Days
- Coverage
- 13m² per litre
- Recommended Thinner/Cleaner
- Teamac Thinner 14
- Solids by Volume
- 49%
- VOC
- 399 g/litre
- Touch Dry
- 5 Hours
- Finish
- Gloss
- Size
- 1 litre, 2.5 litre, 5 litre
- Recommended Dry Film Thickness
- 35 - 40 μm
- Recommended Wet Film Thickness
- 75 μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Iron
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Primer/Finish
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- Duracote
- Colour Family
- Red
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 5 hours
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Primer/Finish
Questions
Question about the product
Bob
on
2023-07-31 20:45:05
| Question:
So I have applied one coat to side of narrowboat, scabbled down to steel then sanded to bare metal. The data sheet says it can be reapplied coat on coat, with the weather as poor as it is this year I’m waiting to apply second coat. Does it need to keyed prior to another coat or can it just be over coated on itself ?. And can I just key it each year and apply another coat as and when required?. Thank you |
Answer from Rawlins’ Technical Team:
This product can be applied coat on coat. However, if the previous coat has fully cured, which takes around 5 days at 20 Degrees ░, you'll need to abrade the existing coating, which will ensure the subsequent coat can adhere successfully. | |
|
Mark
on
2021-03-25 17:06:51
| Question:
As daft as this may sound, is this product aquatic friendly? I need something to paint a galvanised roof of my koi pond. If this isn’t suitable, can you recommend a product that is please? |
Answer from Rawlins’ Technical Team:
This paint is not aquatic friendly, assuming the galvanised is bare, clean, dry, sound and prepared as detailed in the Technical Data sheet (treated with Teamac Mordant Solution (T Wash) prior to application ) we can recommend Teamac Metaclor Antifouling Primer followed by Teamac Chlorvar Chlorinated Rubber Paint. Once fully cured this is will be fine for aquatic life. | |
|
matt
on
2019-09-22 15:07:53
| Question:
Would this be a good product to use on sea water vessels to protect the steel keels? |
Answer from Rawlins’ Technical Team:
In this sort of environment you would be better using Teamac Zinc Phosphate Primer on the topsides and Teamac Metaclor Underwater CR Primer anywhere below the waterline. | |
|
Neil Tulloch
on
2018-10-01 18:55:21
| Question:
Is one coat ok or do you recommend two |
Answer from Rawlins’ Technical Team:
Teamac Duracote Red Oxide Paint can be applied directly to prepared iron or steel, a minimum of 2 coats are recommended when leaving as a finish. Alternatively one coat can be applied if another suitable topcoat is being applied subsequently. For greater protection prime first with Teamac Zinc Phosphate Primer. | |
|
Bsrry Tindall
on
2018-03-21 15:05:18
| Question:
Can this paint be used on wood please? Barry |
Answer from Rawlins’ Technical Team:
Teamac Duracote Red Oxide Paint is not designed for application to wood but could be applied if necessary. We would however recommend the use of Teamac Metalastic Metal Protective Paint Colours instead where possible. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Teamac Duracote Red Oxide Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage
You might also like
Teamac Thinner 14
Clear hydrocarbon solvent. For thinning and cleaning down Teamac products. For marine paints, metal coatings, and similar surfaces.
Price
£12.80
(incl. VAT)
In Stock and Available for Delivery
Coo-Var Universal Degreaser Cleaner
Clear universal degreaser/cleaner. Removing grease and oil patches from multiple surfaces. Suitable for use on floors, walls, metals, and interior/exterior surfaces.
Price
£24.72
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Teamac Zinc Phosphate Primer
In Red or Grey. High-performance anticorrosive metal primer. For iron, steel, and other metal surfaces such as fire escapes, metal gates, and garage doors. Usable in marine environments. Semi-matt finish. Excellent adhesion and durability.
Price
£18.98
(incl. VAT)
In Stock and Available for Delivery