- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A low odour clear resin which impregnates and seals block paving, resisting oil and diesel spillage whilst improving the overall appearance of the paving blocks with a matt finish.
Ideal for vehicle and pedestrian areas, new and existing drives, forecourts, parking areas, walkways and paths, etc.
- Simple and quick to apply.
- Enhances appearance.
- Matt finish.
- Easier to clean and maintain.
- Resistant to oil and diesel spillages.
- Improves wear resistance.
Sika Block Paving Seal is a low odour clear resin which impregnates and seals block paving, resisting oil and diesel spillage whilst improving the overall appearance of the paving blocks with a matt finish.
Uses
- Sika Block Paving Seal may be used for both vehicle and pedestrian areas.
- New and existing drives, forecourts, parking areas, walkways and paths can all be treated.
Features & Benefits
- Simple and quick to apply
- Enhances appearance
- Matt finish
- Easier to clean and maintain
- Resistant to oil and diesel spillages
- Improves wear resistance
Preparation
- For new block paved areas, remove all loose material by brush or vacuum.
- Ensure the joints are filled with compacted Sika Setting Sand or kiln dried sand before treating with Sika Block Paving Seal.
- For existing block paved areas remove all traces of weeds, algae and lichens with Sika Mould Buster.
- Remove oil, grease and diesel stains.
- Ensure all areas are completely dry before applying Sika Block Paving Seal.
- To ensure the paving is completely dry, scrape out some jointing sand to a depth of up to 10mm. If the sand is dry then the blocks may be treated.
Application
- Treat the perimeter of the prepared block paving area first.
- Apply the first coat by roller spreading liberally and uniformly, making sure the Sika® Block Paving Seal does not puddle.
- During application always ensure a ‘wet edge’ is maintained to avoid a striping affect.
- Repeat the process leaving a maximum of 24 hours between coats.
- Apply the second coat at right angles to the first.
- Do not over-apply.
- Allow at least 6 hours before pedestrian traffic and 24 hours for vehicle traffic.
- Protect from moisture during curing. If rain is likely within 6 hours of application, do not use.
- As a guide Sika Block Paving Seal will treat up to 5-8m² per litre.
- Coverage will depend on surface finish, permeability and profile of the block pavers.
- It is always recommended that a trial area be treated to ascertain an accurate measure of consumption and to ensure the finished appearance is acceptable.
- Clean with white spirit.
Data sheet
- Manufacturer
- Sika
- Interior / Exterior Use
- Exterior Use
- For Use On
- Block Paving
- Sheen
- Matt
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 4x 5L
20L - Coverage
- 5 - 8m² per litre
- UN Number
- UN1866
- Resistance to chemicals
- Oil
- Resistance to chemicals
- Diesel
- Base Type
- Solvent-Based
- Suitable For Use On
- Blockwork
- Finish
- Matt
- Components
- 1K
- Product Usage Type
- Sealer
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Block Paving Seal is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT