- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to structural steel requiring protection from cellulosic fire.
- Low VOC acrylic intumescent material
- Independently fire tested in accordance with BS 476 Parts 20-22
- Up to two hours cellulosic fire protection on hollow sections exposed in interior environments
Description
International Interchar 1290 is a single component, borate and chlorine free, water borne intumescent coating designed for on-site application to structural steel requiring protection from cellulosic fire. International Interchar 1290 is a low VOC acrylic intumescent material independently fire tested in accordance with BS 476 Parts 20-22.
International Interchar 1290 is a thin film waterborne intumescent coating optimised for hollow sections up to 180 minutes fire resistance whilst still maintaining aesthetics.
- Optimized loadings for 90-120 minutes fire resistance
- Tested to BS 476: Parts 20-22
- Compatible with a wide range of primers and a full topcoat colour range including waterborne topcoats through our Interthane®, Interfine® and Intercryl® range
- High potential for thickness optimization to complement structural fire engineering solutions
- Fast drying characteristics for excellent productivity
- Single pack product for fast and easy single leg airless spray application
- High solids, low odor, low VOC formulation (according to EU Solvent Emissions Directive (SED) 1999/13/EC)
Fire protection with aesthetic appeal
Interchar 1290 has been designed to allow fireproofing without compromising aesthetic appeal:
- Competitive dry film thicknesses
- Applied as a thin layer, it does not compromise intricate designs and shapes created from the structural steel
- Easy overcoating with a wide range of tintable topcoats
Typical uses
Provides passive fire protection to structural steelwork while maintaining architectural aesthetics for commercial infrastructure assets including:
- Airports
- Stadia and leisure facilities
- Commercial buildings
- Retail complexes
Systems
The following primers are approved for use with Interchar 1290:
- Intercure 200
- Interprime 306
- Intercure 200HS
- Interseal 1052
- Intergard 251
- Interseal 670HS
- Intergard 269
- Interzinc 52
The following topcoats are approved for use with Interchar 1290:
- Intersheen 579
- Interthane 870
- Interthane 990
- Interthane 990UHS
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
2468-1007626
Data sheet
- Coverage
- 220-740 microns (8.8-29.6 mils) dry equivalent to 297-1000 microns (11.9-40 mils) wet
- Suitable For Use On
- Metal
- Suitable For Use On
- Primed Steel
- Suitable For Use On
- Metallic Zinc Primed Surfaces
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Brand
- International
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Interchar 1290 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
International Intercure 200
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. As a primer for steelwork intended for use in a wide range of aggressive environments,...
Price
£348.84
(incl. VAT)
In Stock and Available for Delivery
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions. Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
Price
£583.09
(incl. VAT)
In Stock and Available for Delivery
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
Price
£231.28
(incl. VAT)
In Stock and Available for Delivery
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance. As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
Price
£80.47
(incl. VAT)
In Stock and Available for Delivery
International Interprime 306
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
Price
£46.06
(incl. VAT)
In Stock and Available for Delivery
International Interseal 670HS
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. 4,800+ colours, inc. RAL, RAL Design...
Price
£179.76
(incl. VAT)
In Stock and Available for Delivery
International Intersheen 579
Fast drying, single component, modified acrylic finish in 4,800+ semi-gloss colours intended for use as a sealer coat for single pack acrylic intumescent coating systems but may also be used as a cosmetic finish over single pack primers and intermediates. Order a Colour Sample
Price
£101.53
(incl. VAT)
In Stock and Available for Delivery
International Interthane 870
International Interthane 870 is high build which means it can reduce the number of coats you require and keep costs to a minimum. Semi-gloss and available in 4,800+ colours (including RAL 9007 Grey Aluminium), International Interthane 870 delivers excellent cosmetics and extended recoatability in both new construction and as an industrial...
Price
£140.32
(incl. VAT)
In Stock and Available for Delivery
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
Price
£131.14
(incl. VAT)
In Stock and Available for Delivery
International Interzinc 52
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
Price
£614.93
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery