- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates. Used for priming, consolidating and sealing of absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.
- 1-part, ready to use.
- Rapid drying (approx 45 minutes at 50% Rh & 20°C).
- Compatible with all SikaBond wood floor adhesives.
- Especially suited to refurbishment projects where old adhesive residues are present.
- Suitable for underfloor heating.
- Applied by roller or squeegee.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates.
Used for priming, consolidating and sealing of:
- Absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.
- Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.
- Can be used over underfloor heating. (Max 3% moisture CM Method, 4.5% Tramex).
Features & Benefits
- 1-part, ready to use.
- Rapid drying (approx 45 minutes at 50% Rh & 20°C).
- Compatible with all SikaBond wood floor adhesives.
- Especially suited to refurbishment projects where old adhesive residues are present.
- Suitable for underfloor heating.
- Applied by roller or squeegee.
Limitations
- SikaBond Rapid DPM is only to be used in well ventilated areas. Ensure adequate air ventilation during application and curing.
- In areas such as basements, or other areas without a functional damp proof membrane preventing hydrostatic water vapour pressure, SikaBond Rapid DPM must only be installed after the application of Sikafloor 81 EpoCem. For detailed
- instructions consult the Product Data Sheets or contact our Technical Department.
- Do not use in conjunction with any other materials other than those recommended by Sika Limited.
- Some concrete surface sealers can negatively influence the adhesion of SikaBond Rapid DPM. Pre-application trials are recommended. For further information or assistance please contact the Technical Department.
- Installation on magnesite or on isolating bituminous layers is not recommended.
Data sheet
- Manufacturer
- Sika
- For Use On
- Cement
- Application Method
- Roller
Squeegee - Colour
- Standard / Ready Mixed
- Pack Size
- 5L
- UN Number
- N/A
- Suitable For Use On
- Cement
- Application Method
- Roller
- Application Method
- Squeegee
- Manufacturer
- Sika
- Components
- 1K
- Product Range
- SikaBond
Questions
Question about the product
leonard on 2022-03-25 12:52:14 | Question:
Hi, I'm planning to use SikaBond Rapid DPM on a solid concrete slab and then place low profile Nu Heat Under Floor Heating. The max operating temperature of the UFH water pipes can be 55'C. Will your product have any issues at these operating temperatures? Thnaks, leonard |
Answer from Rawlins’ Technical Team:
The service temperature for this product is upto 35°C, unfortunately it would not be suitable for this application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
SikaBond Rapid DPM is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT