Durable and Conductive Epoxy Floor Coating

This advanced two-component epoxy system delivers excellent crack-bridging properties, making it ideal for high-performance industrial flooring. Designed for use in environments requiring electrostatic dissipation, it provides an effective solution for areas handling sensitive electronics, laboratories, and industrial workspaces. Available in light grey, pebble grey, and custom colours, it ensures a professional finish while maintaining durability.

Where It Can Be Used

Designed for floors in warehouses, factories, and industrial settings, this coating is ideal for surfaces subjected to heavy foot traffic, forklifts, and machinery. Its dissipative properties make it suitable for areas where electrostatic control is essential, including pharmaceutical and automotive industries.

Performance and Certifications

• Electrostatic dissipative properties ensure compliance with safety requirements in high-risk environments.
• Highly resistant to chemicals and mechanical stress, preventing damage from industrial use.
• Tested and approved for slip resistance, ensuring workplace safety under various conditions.
• Meets EN 13813:2002 performance standards, providing excellent adhesion and structural integrity.

Application and Compatibility

For optimal results, the substrate must be firm, stable, and free from contaminants. It should be primed using compatible Remmers epoxy primers or mortars. When applied as a coating, it requires proper surface preparation, ensuring strong adhesion and long-lasting durability.

Limitations and Restrictions

• Not suitable for exterior use or areas exposed to direct UV light, as epoxy coatings may yellow over time.
• Application should not occur when humidity exceeds 80% or when temperatures are below 10°C.
• Do not mix with other non-compatible epoxy resins or coatings.
• For optimal electrostatic dissipative performance, the correct thickness and curing times must be observed.

Recommended Accessories and Complementary Products

• WHG TX (1221) – A thickening agent for vertical applications.
• Epoxy Conductive (6671) – A conductive epoxy primer designed for high-performance dissipative flooring.
• V 101 Cleaner – Suitable for tool and equipment cleaning post-application.

For further information, always refer to the downloadable technical data sheet.

Health and Safety

This product is classified as hazardous. It contains benzyl alcohol and 3-aminomethyl-3,5,5-trimethylcyclohexylamine, which may cause allergic reactions and severe skin burns. Proper protective equipment, including gloves and eye protection, should be worn. Avoid inhalation of vapours. It carries UN number 2735 and is classified as a corrosive liquid. Disposal must follow local regulations. Always refer to the safety data sheet before use.