Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Remmers PUR Aqua Top 500 2K M is a silk matt, water based, transparent sealant for interior spaces with little tendency to soil. Tested according to the AgBB test criteria for VOC emission from construction products relevant to interior spaces. Remmers PUR Aqua Top 500 2K M is a silk matt sealant for all Remmers Epoxy and PUR coatings as well as for fixating and sealing Remmers flake covers.

Surface Preparation

• The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion.
• The substrate must be prepared using suitable Remmers products.
• Apply the sealant within 48 hours.
• In the case of longer waiting times, sand the surface treated in the previous coat and remove dust.

Mixing Instructions

• Add the entire quantity of the hardener (component B) to the basic compound (component A).
• Mix thoroughly with a slow-speed electric mixer (approx. 300 - 400 rpm).
• Pour the mixture into a separate container and mix again thoroughly.
• Mix for at least 3 minutes.
• Insufficient mixing is indicated by streaks forming.
• In the case of temperatures of > 20°C and dark substrates, add up to 10% by mass of water to the product.
• As soon as the mixture is ready to use, apply it in full to the prepared surface and spread it using suitable tools.

Conditions For Use

• Temperature of the material, air and substrate: from min. +10°C to max. +25°C.
• During the curing process, the applied material should be protected from moisture which could impair the surface and impair the adhesion.
• Relative humidity should not exceed 80%.
• The temperature of the substrate must be at least 3°C above the dew point temperature during application and curing.
• Good ventilation must be ensured so that water can be released into the air.

Working time (+20°C)

Approx. 60 minutes.

Directions

For professional users only.

Waiting time (+20°C)

Waiting time between coats from min. 8 hours to max. 48 hours. In the case of longer waiting times, sand the surface treated in the previous coat and remove dust.

Drying Time (+20°C)

Foot traffic after 8 hours, mechanical loads after 3 days, full loading capacity after 7 days.

Storage

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.