- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. For more colours, see RSL Resupen WB - Special Colours.
- Chemical resistant and UV stable.
- Good abrasion and impact resistance.
- Hygienic and easy to clean.
- No VOC’s - Resistant to hot water.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Description
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Ordering References
| Colour | Nearest RAL Match | Size | Finish | Mimimum Order Quantity |
|---|---|---|---|---|
| Clear | - | 5 Litre | Matt or Satin | 1 |
| Flint Grey | RAL 7005 | 5 Litre | Matt or Satin | 1 |
| White | RAL 9003 | 5 Litre | Satin | 1 |
For more colours, see RSL Resupen WB - Special Colours.
Resupen WB is a durable top coat which can be applied to a range of Resin Surfaces Limited (RSL) products. It is resilient and can produce an attractive matt or satin finish to floors or walls. Wall coatings are available in pastel shades, whilst floors can be finishing in Flint or Stirling.
Resupen WB was applied to RSL's Resutop at Thanet Earth in Kent to produce an excellent matt finish. With its seamless appearance, high resistance and self-smoothing qualities, it was the ideal finish for the country's largest crop production site.
RECOMMENDED USES
- As a seal coat for other Sherwin-Williams floor coatings and screeds
- Laboratories
- Food factory units
- Prisons and police cells
- Pharmaceutical areas
- Medical and healthcare
- Can be used on floors and walls
Preparation
New Concrete Floors: New concrete must be clean, dry and fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.
Timber Floors: Must be clean, sound and dry. Old clear varnish/topcoat must be removed/sanded prior to application, as it may affect the inter- coat adhesion with Resupen WB.
Existing Concrete Floors: Remove all dirt, oil, grease, old paints or any or other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing. Local repairs should be carried out using Resuflor Patch or Resuscreed 45.
Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed, then please consult with our technical team for advise on intercoat adhesion and suitability, as it may not be compatible with existing floor coating.
Where Resupen WB is applied to masonry/concrete surfaces, care must be taken to ensure that surface preparation is thorough but does not disfigure the surface. Where surfaces are found to be porous a primer coat may be required to achieve a uniform sealed surface.
Priming
Resupen WB may be applied direct to concrete or as a seal coat or top coat to a resin floor system specified in our datasheets where a primer is not required. When applied direct to porous substrates the surface may require priming. Dry surfaces may be primed with Resuflor WB Clear or Resuprime NT.
Where the relative humidity of the substrate exceeds 75%, Resuprime MVT should be specified and selected on Resuprime MVT the basis of hygrometer readings in accordance with BS 8203.
The number of coats to be applied is chosen in accordance with the following table:
ERH% Required Coating Thickness
75-85 1coat of Resuprime MVT at 200 microns per coat
85-92 2coats of Resuprime MVT at 200 microns per coat
92-97 3coats of Resuprime MVT at 200 microns per coat
Application
The ambient temperatures of the area should not be allowed to fall below 10°c throughout application and curing. Surface temperature must be above 5°c.
Mixing: Pre-mix the base component to a uniform consistency then add the entire contents of the hardener to the base and mix by using a slow speed hand held powered mixer and mixing paddle for approximately two to three minutes to achieve consistent mixture. Note: Do not use a separate mixing bucket as it may affect the mixing ratio.
Apply the whole mixed paint by using spreading rake, roller and brush to achieve the maximum coverage within the specified pot life time frame.
Do not add water to this product.
Slip resistance can be improved by lightly broadcasting anti slip aggregates on the first coat (after primer) whilst still wet and back rolling, at a rate of 50/100 g/m.sq. When cured apply the second Resupen WB Clear coat to secure the aggregates. Alternatively, one pack of R.S. Beadgrip can be added to each pack of Resupen WB Clear to achieve a fine non-slip texture.
Product Details
2934-937081
Data sheet
- Manufacturer
- RSL
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floors
Concrete Walls
Plaster Floors
Plaster Walls
Wood Floors
Wood Walls - Application Method
- Roller
Brush
Rake - Colour
- Clear, Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Application
- Rake, Roller, Brush
- Coverage
- 5 litres will cover 50m. sq. @ 100 microns wet film thickness.
- Touch Dry
- 6-8 Hours
- Base Type
- Water-Based
- Suitable For Use On
- Plaster Walls
- Suitable For Use On
- Wood Walls
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Concrete Walls
- Suitable For Use On
- Plaster Floors
- Finish
- Matt
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Rake
- Components
- 2K
- Product Usage Type
- Topcoat
- Product Range
- Resupen
- Type of Wood Finish
- Wood Varnish
- Colour Family
- Grey
- Colour Family
- Clear
- Colour Family
- White
- Chemical Resistance
- Sodium Hydroxide
- Chemical Resistance
- Aromatic Hydrocarbons
- Chemical Resistance
- Acetone
- Chemical Resistance
- Butanol
- Chemical Resistance
- Ethanol
- Chemical Resistance
- Propanol
- Chemical Resistance
- Ethyl Acetate
- Chemical Resistance
- MIBK
- Chemical Resistance
- Isopropanol
- Chemical Resistance
- Sodium Bisulfate
- Chemical Resistance
- Methyl Ethyl Ketone
- Chemical Resistance
- Sodium Dihydrogenphosphate
- Chemical Resistance
- Toluene
- Chemical Resistance
- Sulfuric Acid
- Chemical Resistance
- Xylene
- Chemical Resistance
- Potassium Hydroxide
- Chemical Resistance
- Crude Oil
- Chemical Resistance
- Organic Durfactants
- Chemical Resistance
- Formaldehyde
- Chemical Resistance
- Dethyl Ether
- Chemical Resistance
- Kerosene
- Chemical Resistance
- Skydrol 500B-4
- Chemical Resistance
- Benzene
- Chemical Resistance
- Skydrol LD4
- Chemical Resistance
- Sodium Chloride
- Chemical Resistance
- Hyjet Iv-A(Plus)
- Chemical Resistance
- Petrol/Gasoline
- Chemical Resistance
- Hyjet HF
- Chemical Resistance
- Acetic Acid
- Chemical Resistance
- Aviation Fuel
- Chemical Resistance
- Potassium Chloride
- Chemical Resistance
- Diesel Fuel
- Product Type
- Polyurethane
Questions
Question about the product
Robert Brindley
on
2018-12-18 13:57:10
| Question:
Can you supply samples of the available colours to apply on concrete floors? |
Answer from Rawlins’ Technical Team:
We have a colour card we can send out or if you have specific colours you would like we can advise which is the closest or for larger orders bespoke colours can be produced to meet your colour scheme. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL Resupen WB - Standard Readily Available Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
RSL Resupen WB - Standard Readily Available Colours
Extremely durable polyurethane finish for concrete, plaster and wood that produces a resilient coating on Sherwin-Williams wall and flooring systems. It is available in clear, colour, matt and satin finish. For more colours, see RSL Resupen WB - Special Colours. Chemical resistant and UV stable. Good abrasion and impact resistance....
Price
£158.56
(incl. VAT)
In Stock and Available for Delivery
RSL Resuflor Screed
Resuflor Screed (formerly known as Resuscreed 45) is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be...
Price
£87.77
(incl. VAT)
In Stock and Available for Delivery
RSL Resuflor Patch
RSL Resuflor Patch (Formerly known as Resuscreed PA and Resupatch) is a three-pack epoxy resin mortar designed for rapid concrete repair in heavy duty environments. Excellent mechanical properties Can be feather edged Abrasion and impact resistant Dust-free Concrete like in appearance Easy to apply Minimum surface preparation...
Price
£51.28
(incl. VAT)
In Stock and Available for Delivery