- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Nu-Cryl AG Extra is a unique, clear, hydrophobic impregnation Anti Graffiti Coating System.
- Outstanding resistance to weathering and ultra-violet degradation, and no reapplication is required after graffiti removal
- Tested to BS 476 parts 6&7. Satisfies Class’0’ requirements of current Building Regulation. Tested to BS 6853 Determination of weighted summation of toxic fumes and Methods for measuring Smoke Density
- For use on dense, low porosity substrates such as polished concrete, GRC, blockwork, marble and terrazzo, and compatible with concrete surfaces treated with Silane
Nu-Cryl AG Extra is a unique, clear, hydrophobic impregnation Anti Graffiti Coating System. Applied by brush or air-less spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to ‘breathe’. Nu-Cryl AG Extra will not noticeably change the surface appearance and graffiti can be effectively removed using a low pressure hot wash.
Features & Benefits
- Will not noticeably change the appearance of the substrate
- Excellent stain resistant and water repellent qualities
- Dirt, pollution and even graffiti can be removed from the treated surface
- Long life graffiti and environmental protection
- Outstanding resistance to weathering and ultra-violet degradation
- No reapplication required after graffiti removal
- Gives up to 15 years protection
- Solvent free
- Tested to BS 476 parts 6&7. Satisfies Class’0’ requirements of current Building Regulation
- Tested to BS 6853 Determination of weighted summation of toxic fumes and Methods for measuring Smoke Density
- For use on dense, low porosity substrates such as polised concrete & GRC and blockwork, marble and terrazzo
- Compatible with concrete surfaces treated with Silane. Allow 72 hours to lapse before overcoating surfaces treated with Silane
- Curing times are over 7 days when fully cured, with waterproof properties showing after 4 hours
- One application is normally required, however on porous substrates a second application may be required
Average coverage rates:
- Granite - 15m2 /litre
- Marble - 13m2 /litre
- Terrazzo, engineering brick, polished concrete, GRC - 8m2 /litre
Data sheet
- Manufacturer
- Hydron
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Water
- For Use On
- Polished Concrete
GRC (Glassfibre Reinforced Concrete)
Blockwork
Marble
Terrazzo - Application Method
- Spray
Brush
Roller - Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
25L - Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Blockwork
- Suitable For Use On
- Marble
- Suitable For Use On
- Polished Concrete
- Suitable For Use On
- GRC (Glassfibre Reinforced Concrete)
- Suitable For Use On
- Terrazzo
- Finish
- Natural
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Components
- 1K
- Permanent / Semi-Permanent
- Permanent
- Usages
- Anti-Graffiti
- Product Usage Type
- Sealer
- Product Range
- Nu-Cryl
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hydron Nu-Cryl AG Extra is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT