- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Cemcrete Primer (formerley known as R.S. Cemprime), a single pack copolymer emulsion designed as a primer for Cemcrete SM and Cemcrete TX and for porous substrates. It stabilises and seals substrates effectively promoting adhesion that will allow self-smoothing compounds to be applied directly.
- Single pack - easy to use and apply
- Provides an effective bonding agent to cementitious surfaces
- Can be used internal and externally
- Can be used as a dust sealer
- Recommended uses include as a primer for pumped industrial screeds - ideal for porous substrates such as concrete and sand/cement screeds - as a temporary surface sealer and dust proofer
- Great coverage - 4.7 kg will cover approx. 34 m2 at 150 µm WFT
- Ready for light traffic after just 24 hours (after application at 20°C); full traffic after 72 hours
- Industrial use only
- 1000KG pack size available - made to order - with 7 day lead time. Contact our sales team on 0113 2455450 or send a message to [email protected] to order
Cemcrete Primer (formerley known as R.S. Cemprime) is a single pack copolymer emulsion designed as a primer for Cemcrete SM and Cemcrete TX and for porous substrates. It stabilises and seals substrates effectively promoting adhesion that will allow self-smoothing compounds to be applied directly. It can also be used as a dust proof coating when applied as a tight coat by squeegee, roller or spray, depending on texture and finish. The product can be applied to vertical substrates to consolidate concrete and cement and other surfaces such as rock where it can disable asbestos fibres and stop these becoming airborne. Once dry Cemcrete Primer produces a water and alkali resistant polymer layer which both bonds to and strengthens the surface.
Quick Links - Click To Jump To Section:
Features & Benefits
- Single pack
- Easy to use and apply
- Provides effective bonding to cementitious substrates
- Can be used as a dust sealer
- Can be used internal and externally
- Excellent adhesion
- Recommended uses include as a primer for Cemcrete SM and Cemcrete TX
- As a surface sealer and dust proofer
- Ideal for porous substrates such as concretes and sand/cement screeds
Preparation
New Concrete Floors:
New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm2 is required.
Existing Concrete Floors:
Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and make sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using Resupatch.
External Surfaces:)
Where evidence of organic growth, lichen, moss etc. is apparent, surfaces must be thoroughly cleaned and should be treated with a long term fungicidal/biocidal treatment which should be allowed to react and then washed down. Careful attention should be given to areas in both horizontal and vertical surfaces such as cracks and joints where water penetration is possible.
Note: Care must be taken to ensure that surface preparation is thorough but does not disfigure the surface.
Application
Cemcrete Primer can be applied by brush, roller, squeegee or spray and worked well into the surface, at a rate of 7.23 m2 /kg and allowed to dry. Sound dense concretes should be dampened (with no free water) with a water spray. Open, highly porous substrates may require a second application to ensure the formation of a suitable surface film to provide a bond. Rates of coverage may vary substantially dependant on the surface preparation and finish of the concrete, rates given assumes a shot blasted surface with medium porosity. Once applied and dry it will not re-disperse in water.
N.B. Cemcrete Primer is not suitable for non-porous surfaces.
Data sheet
- Manufacturer
- RSL
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Cement
Screed
Cementitious Screeds - Application Method
- Squeegee
Brush
Roller
Spray - VOC Levels
- Less than 1 g/l
- Pack Size
- 4.7KG
- Base Type
- Copolymer emulsion
- Key Features
- Stabilises and seals substrates, effectively promoting adhesion
- Dry to Recoat (at 20°C)
- 6-8 hours
- Fully Cured (at 20°C)
- 7 Days
- Coverage
- 4.7 kg will cover 34 m² @ 150 µm WFT
- Min. Application Temperature
- 15°C
- Density
- Approximately 1.00 g/cm3
- Solids by Volume
- 25%
- Heat Resistance (up-to)
- 50°c
- Recommended Dry Film Thickness
- 38 µm
- Recommended Wet Film Thickness
- 150 µm
- Dry for Light Traffic (at 20°C)
- 24 hours
- Dry for Full Traffic (at 20°C)
- 72 hours
- Base Type
- Copolymer Emulsion
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Squeegee
- Product Usage Type
- Primer
- Product Range
- Cemcrete
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL Cemcrete Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
RSL Resuflor Screed
Resuflor Screed (formerly known as Resuscreed 45) is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be...
RSL Cemcrete SM/TX
Cemcrete (formerly known as R.S. Cemcrete and Sher-Crete), a water based, polymer modified cementitious coating designed for application to a wide range of floor and wall surfaces. Provides a smooth (SM) or textured (TX), durable finish strongly bonded to the substrate with a degree of flexibility. Can be built up to a range of thicknesses...