- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
RSL Epo-Flex VJ (formerly known as Resujoint V) is a high performance flexiblilized two component epoxy joint sealant. It is a thixotropic compound which is designed to accommodate low level movement in vertical as well as horizontal joints.
- Tough, yet flexible
- Adhesive
- Easy to clean
- Good chemical resistance
- Accommodates movement
- Maintains a seamless finish
- Flint and Sterling available to order; all other colours are made to order with lead times of at least 7 working days
RSL Epo-Flex VJ (formerly known as Resujoint V) is ideal for stable expansion jointing in self-smoothing and screed floor coating systems. It offers high performance on a large range of screed systems.
For more colour options, please ring our technical team.
Recommended Uses
- Granolithic screeds
- Polyurethane screeds
- Polymer screeds
- Epoxy substrates
- Concrete
- Asphalt
Preparation
Remove all laitance, old mastic and other filler media by cutting or grinding. Ensure the joint is clean, dry, sound and free from dust. The joint should be formed to the correct depth/profile by placing a bond breaker or debonding film at the base of the joint, to form a uniform cross section with a minimum depth of 6mm and width to depth aspect ratio of 2:1 to 1:1. Where high loads are to be applied then a minimum depth of 10mm should be used.
Priming
Prime the walls of the joint with Resuprime NT or Resuprime MVT by brush, ensuring all the sides and base are covered with the primer.
Application
Mixing: Pre-mix the coloured base component to a uniform consistency then add the entire contents of the hardener to the base. Mix thoroughly, using a slow speed electric mixer for approximately two minutes until the two components have fully combined.
The mixed unit should be applied immediately by trowel, spreading knife or spatula to fill the joints and smooth the surface.
For joints over 10mm wide, a firm backing should be used. Ensure that all joint fillers are well compacted. It is important to ensure that the backing stop/bond breaker is tight fitting in the joint to retain the Epo-Flex VJ in the correct position.
Care should be taken when placing the backing strip to ensure that it is not stretched on installation, as this can result in leakage at the ends of the joint/strip as it shrinks back.
Data sheet
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- Application
- Trowel, Spreading Knife, Spatula.
- Coverage
- 2.5kg will fill 21 linear metres @ 10mm deep and 10mm wide.
- Touch Dry
- 24 Hours
- Base Type
- Epoxy
- Application Method
- Spatula
- Application Method
- Palette Knife
- Product Usage Type
- Sealant
- Product Range
- Epo-Flex
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
RSL Epo-Flex VJ is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT