Hi there I’m looking into using this on a woodland playground. So I need to know if it’s toxic to animals/ plants and it’s safe to use around kids equipment? Also would it be ok to use outside.

This product has not been tested as animal/ plant safe so unfortunately we cannot confirm this.

Could you tell me how any square meters 5L will cover please.

The product will protect 20m² of timber per 5lt.

We are required by building regulations to use this to coat external wood cladding on the side of our house. The wood is European oak. The new oak is a yellow colour when first put up, but it turns to silver after a year or so. Will this solution stop this natural fading or will the wood continue to do this? We want it to turn to silver! Thanks.

Hydron Nu-Flame Clear Impregnation offers protection against the spread of fire but not protection against UV so it will not prevent the natural silvering of the timber.

Will Class 0 Certification be maintained if product is applied to new timber and then overcoated with a water based stain such as 'Ronseal One Coat'?

The product data sheet states; Over-coating: Any treated timber which is to be over-coated with a varnish, stain or paint should be tested for adhesion and compatibility purposes prior to fully over-coating. It is advisable to overcoat with water based or acrylic decorative paint finishes to ensure that the fire retardant properties are not compromised.

Please can you advise if this has been tested re: class 0 surface spread of flame and if so, where cam i download the certification?

Hydron Nu-Flame Clear Impregnation has been tested to achieve Class 0 surface spread of flame on both interior and exterior timber. A certificate of supply can be requested following purchase and application but if you require any testing information prior to any purchase this would need to be requested from the manufacturer directly.

Is this product compatible with Sadoline extra wood stain and berrettine used as an overcoat ?(https://www.google.com/shopping/product/17066715910191917418/image?hl=en-GB&ie=UTF-8&q=sadoline+extra&gws_rd=ssl&prds=cid:17066715910191917418,sgro:iv,cs:1&sa=X&ved=2ahUKEwj2-MCr2IXfAhVKBMAKHTnDAHwQ-K4BegUIDxCkAQ) or berrettine (https://www.google.com/search?q=barrettine&hl=en-GB&source=android-browser&prmd=smivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwirhoXm2YXfAhXoIcAKHV6lBocQ_AUoA3oECBYQAw&biw=360&bih=525#imgrc=M-fpWqFCkQLr_M:&isa=y) .

Always difficult to determine the overcoating effect; Sadolin in wet form White Spirit & Naptha based, not a good start Barrettine in wet form Oil / Solvent / Spirit based, again not a good start White Spirit & Naptha will logically at some stage evaporate off, leaving whatever it is carried in Oil could theoretically remain indefinitely re-contributing to overall flammability Plus of course the compatibility issues between an oil based & water based products, causing all sorts of problems, including blooming. There are more compatible finishes available, generally the water based finishes are better suited.

Hydron Nu-Flame Clear Impregnation

Reference HPC 98

Brand Hydron Protective Coatings

Search ID HYD3023

A water based, ready to use solution that is absorbed into the surface of the substrate.

For timber substrates that require class 0 Spread of Flame or Euro class B. For use on cladding, staircases, trusses, joists, walls, log cabins, garages, pool enclosures, saunas and many others both inside and outside. Tested to:
- Euroclass B: BS EN 13501: B-s2,d0 Class 0 BS 476: Parts 6 & 7
- SBI Test: Euroclass B: BS EN 13501: B-s2,d0
- Single Flame Test: BS EN ISO 11925-2: 2010
Please Note: Timber must be a minimum of 12mm thick for the treatment to be effective

Colour

Clear

Size

£154.93(incl. VAT)

£129.11(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

6 questions about the product

Description

For timber substrates that require class 0 Spread of Flame or Euro class B. Nu-Flame Clear Impregnation is a water based, ready to use solution that is absorbed into the surface of the substrate.

Please Note: Timber must be a minimum of 12mm thick for the treatment to be effective.

Features & Benefits

Easy to apply
Quickly penetrates the surface of the substrate with high diffusion properties
Does not require a protective finishing coat and can be left natural or, if specified, over-coated (left naturally, timber may darken slightly)
Non-flammable properties which restrict ignition and the spread of flame
Will not wash out once dry
Not converted into smoke when exposed to high temperatures
Carbon char is restricted to the immediate area
Treated materials, when exposed to temperatures of up to 1700°C, are subject to charcoal forming, restricting the spread of flame
For use on cladding, staircases, trusses, joists, walls, log cabins, garages, pool enclosures, saunas and many other projects both inside and outside
Coverage rate 2 Coats @ 8 m² per litre per coat Or 3 Coats @ 12 m² per litre per coat. Number of coats dependent on substrate porosity
Minimum of 1 hour between coats. Full drying time approximately 24 hours at + 20°C / 65° relative humidity, with maximum fire retarding capabilities achieved after 7 days
Tested to:
- Euroclass B: BS EN 13501: B-s2,d0 Class 0 BS 476: Parts 6 & 7
- SBI Test: Euroclass B: BS EN 13501: B-s2,d0
- Single Flame Test: BS EN ISO 11925-2: 2010

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details

Reference 3023-368636

Data sheet

Interior / Exterior Use: Interior & Exterior
Water / Solvent Based: Water based
Application Method: Brush, roller, spray, vacuum, dip, or flood coated
Colour: Colourless. May change colour of some substrates.
Single, Two or Three Pack: Single
Product Certifications: Euroclass B: BS EN 13501: B-s2,d0 Class 0 BS 476: Parts 6 & 7 SBI Test: Euroclass B: BS EN 13501: B-s2,d0 Single Flame Test: BS EN ISO 11925-2: 2010
Pack Size: 5L
Coverage: 2 Coats @ 8m²/Litre per coat or 3 Coats @12 m²/Litre per coat.The number of coats is dependent upon the porosity of the substrate.
Min. Application Temperature: 5°C
Shelf Life (from date of manufacture): 12 months
Drying time: approximately 24 hours at + 20°C / 65° relative humidity, with maximum fire retarding capabilities achieved after 7 days
Base Type: Water-Based
Suitable For Use On: Timber
Suitable For Use On: Cladding
Suitable For Use On: Walls
Suitable For Use On: Staircases
Suitable For Use On: Trusses
Suitable For Use On: Joists
Suitable For Use On: Log Cabins
Suitable For Use On: Garages
Suitable For Use On: Pool Enclosures
Suitable For Use On: Saunas
Application Method: Brush
Application Method: Roller
Application Method: Spray
Application Method: Dip
Application Method: Vacuum
Application Method: Flood Coated
Product Usage Type: Fire Retardant
Product Range: Nu-Flame
Fastest Delivery: Next Working Day
Colour Family: Clear

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Fire Test Report HPC 98

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Kevin on 2022-08-31 06:41:31	Question: Hi there I’m looking into using this on a woodland playground. So I need to know if it’s toxic to animals/ plants and it’s safe to use around kids equipment? Also would it be ok to use outside.
	Answer from Rawlins’ Technical Team: This product has not been tested as animal/ plant safe so unfortunately we cannot confirm this.

Peter Thwaites on 2019-12-05 16:53:51	Question: Could you tell me how any square meters 5L will cover please.
	Answer from Rawlins’ Technical Team: The product will protect 20m² of timber per 5lt.

Katrina on 2019-10-18 11:27:55	Question: We are required by building regulations to use this to coat external wood cladding on the side of our house. The wood is European oak. The new oak is a yellow colour when first put up, but it turns to silver after a year or so. Will this solution stop this natural fading or will the wood continue to do this? We want it to turn to silver! Thanks.
	Answer from Rawlins’ Technical Team: Hydron Nu-Flame Clear Impregnation offers protection against the spread of fire but not protection against UV so it will not prevent the natural silvering of the timber.

Chris Kelly on 2019-10-01 10:58:39	Question: Will Class 0 Certification be maintained if product is applied to new timber and then overcoated with a water based stain such as 'Ronseal One Coat'?
	Answer from Rawlins’ Technical Team: The product data sheet states; Over-coating: Any treated timber which is to be over-coated with a varnish, stain or paint should be tested for adhesion and compatibility purposes prior to fully over-coating. It is advisable to overcoat with water based or acrylic decorative paint finishes to ensure that the fire retardant properties are not compromised.

Peter on 2019-04-15 17:41:00	Question: Please can you advise if this has been tested re: class 0 surface spread of flame and if so, where cam i download the certification?
	Answer from Rawlins’ Technical Team: Hydron Nu-Flame Clear Impregnation has been tested to achieve Class 0 surface spread of flame on both interior and exterior timber. A certificate of supply can be requested following purchase and application but if you require any testing information prior to any purchase this would need to be requested from the manufacturer directly.

me on 2018-12-04 08:21:39	Question: Is this product compatible with Sadoline extra wood stain and berrettine used as an overcoat ?(https://www.google.com/shopping/product/17066715910191917418/image?hl=en-GB&ie=UTF-8&q=sadoline+extra&gws_rd=ssl&prds=cid:17066715910191917418,sgro:iv,cs:1&sa=X&ved=2ahUKEwj2-MCr2IXfAhVKBMAKHTnDAHwQ-K4BegUIDxCkAQ) or berrettine (https://www.google.com/search?q=barrettine&hl=en-GB&source=android-browser&prmd=smivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwirhoXm2YXfAhXoIcAKHV6lBocQ_AUoA3oECBYQAw&biw=360&bih=525#imgrc=M-fpWqFCkQLr_M:&isa=y) .
	Answer from Rawlins’ Technical Team: Always difficult to determine the overcoating effect; Sadolin in wet form White Spirit & Naptha based, not a good start Barrettine in wet form Oil / Solvent / Spirit based, again not a good start White Spirit & Naptha will logically at some stage evaporate off, leaving whatever it is carried in Oil could theoretically remain indefinitely re-contributing to overall flammability Plus of course the compatibility issues between an oil based & water based products, causing all sorts of problems, including blooming. There are more compatible finishes available, generally the water based finishes are better suited.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Hydron Nu-Flame Clear Impregnation is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

20 Litre Backpack Knapsack Pressure Sprayer

This knapsack sprayer has a capacity of 20L of liquid and is perfect to perform a versatile range of tasks. Suitable tasks include killing weeds to spraying fences Commonly used to apply fire retardant fluids such as Zeroflame Fire Retardant Treatment, Thermoguard Thermoproof Exterior Fluid and Hydron Nu-Flame Clear Impregnation More...

£75.26 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Hydron Nu-Flame Clear Impregnation

Hydron Nu-Flame Clear Impregnation

Features & Benefits

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

20 Litre Backpack Knapsack Pressure Sprayer