- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Britannia Concrete Floor Sealer is a single pack acrylic formulation concrete dustproofer, with low viscosity for excellent penetration into the pores of the substrate. Designed to penetrate and bind concrete, sand/cement floor screeds, blockwork and rendered walls. Produces a dust-free concrete surface with a subtle sheen.
Ideal for treatment of dusting concrete floors in factories, warehouses, kitchens, food processing areas, garages, workshops, production and plant areas.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Spreading Rate
- Drying Times
- Preparation
- Application
- Cleaning
- Shelf Life & Storage
- Precautions
Features & Benefits
- Single pack product
- Low viscosity for excellent penetration into the pores of the substrate
- Designed to penetrate and bind concrete, sand/cement floor screeds, blockwork and rendered walls
- Ideal for treatment of dusting concrete floors in factories, warehouses, kitchens, food processing areas, garages, workshops, production and plant areas
- Low odour formulation
- Very safe and easy to apply
- Produces a dust-free concrete surface with a subtle sheen
- May be applied using a soft brush or broom, a nylon pile roller or squeegee
Spreading Rate
These will vary depending on substrate, the site conditions and longevity required.
Typically spreading rates will vary depending on the end use.
- Because of its penetrating characteristics, the coverage is subject to great variation depending on the porosity of the substrate
- As a guide, the coverage is generally between 8-10m² per litre per coat
- The coverage of the second coat will normally be considerably more than the first
Drying Times
- At least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat
Preparation
- Floor areas must be clean, dry and free of all contamination
- The floor must be allowed to dry and cleaned and any dust or debris swept or vacuumed off
- Wall surfaces to be sealed should be brushed dry to remove dust and loose material
Application
- Stir well before use
- Do not thin
- Britannia Concrete Floor Sealer may be applied using a soft brush or broom, a nylon pile roller or squeegee
- Please follow the coverage rates shown in Spreading Rate Section
- A thin, even, puddle-free first coat should be applied
- Must be allowed to DRY THOROUGHLY (at least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat
Cleaning
- Tools and equipment, hands and skin should be cleaned whilst material is still wet using soap and water
Shelf Life & Storage
- Up to 18 months if stored in dry conditions at temperatures between +5ºC and +35ºC. Storage at higher temperatures may reduce the shelf life
- Protect from frost
Precautions
- Keep out of reach of children
- In case of contact with eyes wash immediately with plenty of water
- Remove splashes from skin with soap and water or a recognised hand cleaner
- Protect from freezing
- Do not apply paint if there is a risk of heavy rain or frost
- Do not use near fishponds
Data sheet
- Manufacturer
- Britannia
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Concrete, Cement Screed
- Application Method
- Brush, Broom, Roller, Squeegee
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Touch Dry
- At least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat.
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Render
- Suitable For Use On
- Blockwork
- Application Method
- Broom
- Application Method
- Squeegee
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Sealer
- Colour Family
- Clear
- Product Type
- Acrylic
Questions
Question about the product
BOB POGSON on 2021-10-04 15:30:36 | Question:
can this product be painted over (for line markings only) and can be classed as non or low slip can be contacted on 07860 776065 |
Answer from Rawlins’ Technical Team:
This product is not suitable to be over painted and does not provide a level of anti-slip. | |
Howard on 2021-04-10 02:17:51 | Question:
i have a concrete slab in an unheated building that was poured 21 days ago. is this product suitable to be applied now to prevent concrete dust and provide oil and petrol resistance |
Answer from Rawlins’ Technical Team:
Assuming the concrete slab is clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend 401 Epoxy Floor Primer. Temperature for application should be between 10°C and 30°C. For temperatures as low as 5°C 401 WG Epoxy Floor Primer can be used. | |
peter keen on 2019-05-07 14:50:23 | Question:
Is this product for external use on a crossing which some of the aggregate has become exposed? The concrete was laid 3 years ago and the crossing is 24 m2. |
Answer from Rawlins’ Technical Team:
Britannia Concrete Floor Sealer is not suitable for exterior use as a finish, our 314 Clear Floor Sealer can be used externally but we would require more information on what the 'crossing' is and what type of traffic it recieves to be able to confirm suitability. Please contact our Technical Team on 0113 2455450 (option 2) or [email protected] with more information. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Britannia Concrete Floor Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT