- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A one-pack, instantly waterproofing, solvent-based roof coating, used on exterior high-level walkways and gutters as a safety measure.
- Particularly suitable for general maintenance work
- Rainfall immediately after application has no adverse effect
- Can be brush or roller applied
- Please note that Black & Solar Reflective White are subject to a minimum order quantity of 360kg in any pack size derivative
Please note that Black & Solar Reflective White are subject to a minimum order quantity of 360kg in any pack size derivative.
Britannia Aquashield Aggregated Coating is a one-pack solvent-based aggregated coating for safety on high level walkways and gutters. It is ready for use on flat roofs, pitched roofs, high level walkways, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, GRP and fibreglass, felt and metal (galvanised and ferrous).
It waterproofs the substrate instantly and rainfall immediately after application has no adverse effect.
Not for use on balconies, timber surfaces, new and aged PVC, plasticised PVC (Plastisol) or internal use.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Spreading Rate
- Drying Times
- Preparation
- Application
- Cleaning
- Shelf Life & Storage
- Precautions
Features & Benefits
- One-pack product
- Solvent-based
- For safety on high level walkways and gutters
- Ready for use on flat roofs, pitched roofs, high level walkways, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, GRP and fibreglass, felt and metal (galvanised and ferrous)
- Rainfall immediately after application has no adverse effect
- Particularly suitable for general maintenance work
- Can be brush or roller applied
- Good curing performance at low temperatures
- Non-flammable
- Application by brush or solvent resistant roller
- External use only
Spreading Rate
These will vary depending on substrate, the site conditions and longevity required.
Typically spreading rates will vary depending on the end use.
- High Build Coat: between 1kg - 2kg per square metre dependent on substrate
- Applied as a topcoat approximately 1kg per square metre dependent on substrate
Drying Times
- Up to 4-7 days depending on temperature, thickness of coating
- The product may remain slightly soft for a further period depending on climatic conditions, this is not detrimental to the waterproofing qualities of the product
Preparation
Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as oil or grease and allow to dry. Apply Britannia Fungicidal Wash to prevent further fungal/algal growth.
Most roofing substrates to be treated will not normally require priming.
Highly Porous/Friable Surfaces:
- Concrete, Concrete and Asbestos Cladding, Sheeting and Guttering should be primed with Britannia Aquashield Primer (see separate technical sheet) prior to over coating with Britannia Aquashield Aggregated Waterproof Roof Coating
- These surfaces must be jet washed prior to applying the Britannia Aquashield Primer
Metal Surfaces:
- Ferrous-New, Weathered and previously painted galvanised iron and steel
- Non-Ferrous Metals - Aluminium sheeting & Aluminium Alloy Box gutters and previously painted non-Ferrous Metals
- All these areas should be suitably prepared and primed as appropriate (see separate technical sheet) before application of Britannia Aquashield Aggregated Waterproof Roof Coating
Non-Porous Substrates:
- Slate, Polished bricks should be power washed abraded and completely dry, free from any contamination to achieve adhesion of the Britannia Aquashield Aggregated Waterproof Roof Coating
Bitumen Surfaces:
- Discolouration may occur over a new asphalt, tar or bitumen surface; therefore an extra coat may be required, for decorative purposes only
- Aged bitumen can be liable to crack, therefore further advice must be taken
Previously Painted or Coated Substrates:
- It is good practice to inspect and carry out adhesion tests prior on any existing coating or substrate prior to application of the coating
Splits, Cracks, Joints and Seals:
- Pay particular attention to clean out any splits/cracks/joints and seals by scraping or brushing off with a stiff bristle brush before applying the Britannia Aquashield Primer
- Repair all faults in the surface by either Britannia’s Reinforcing Scrim in the first of two coats or using a proprietary sealer
Crazed Areas:
- These should be primed with Britannia Aquashield Primer prior to the application of a coat of Britannia Aquashield Aggregated Waterproof Roof Coating
In areas where excessive movement may occur additional reinforcement must be incorporated into the coating.
Application
- To the dry and cleaned surface, apply a generous coat of Britannia Aquashield Aggregated Waterproof Roof Coating by brush, roller or squeegee, at the minimum specified spreading rate as stated above under the heading
- Please follow the coverage rates shown in Spreading Rate Section
- Application Temperature should be between 5°C-25°C
Cleaning
- For all cleaning use White Spirit
Shelf Life & Storage
- Up to 2 years if stored correctly in an unopened container
Precautions
- Flammable - keep away from sources of ignition
- Ensure good ventilation during application
- Over occupied premises during insulation of coatings we would advise keeping windows closed
- Wear gloves, goggles and suitable protective clothing
- In case of contact with eyes rinse immediately with plenty of water and seek medical advice
- Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
- Keep out of reach of children
- Do not use near fishponds
- Toxic to aquatic organisms
- May cause long term adverse effects in the aquatic environments
- Do not empty into drains
Data sheet
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Metal, Concrete, Fibreglass, Aluminium, Galvanised Iron, Steel, Bitumen, Slate, Brickwork
- Application Method
- Brush, Roller
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1KG, 2.5KG, 5KG, 20KG
- Coverage
- 1kg per square metre dependent on substrate.
- Touch Dry
- Up to 4-7 days depending on temperature, thickness of coating.
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Brickwork
- Suitable For Use On
- Bitumen
- Suitable For Use On
- Galvanised Iron
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Slate
- Suitable For Use On
- Fibreglass
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Waterproofing
- Usages
- Solar Reflective
- Product Usage Type
- Topcoat
- Product Range
- Aquashield
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Britannia Aquashield Aggregated Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Britannia Aquashield Primer
Britannia Aquashield Primer is a solvent based primer for very porous and loose/friable surfaces. It ensures the Aquashield topcoat delivers optimum waterproofing performance. Works instantly Vital stabilisation of highly friable/porous surfaces Rainfall immediately after application has no adverse effect Can be brush, roller or spray...
Britannia Fungicidal Wash Solution
A water-based solution which controls and treats fungal and algal growth prior to painting external hard services. For external hard surfaces such as tiled roofs, walls, timber decking, block paving and cladding. Water based - Easy, quick and safe to use. Powerful, proven water based solution for external hard surfaces. Specially...
Britannia Reinforcing Scrim
Britannia Reinforcing Scrim is a polyester-based mesh that can be used to reinforce the following: roof fixings, cracks, splits, holes and joints in asbestos gutters and sheeting, rooflights, metal, bituminous felts/coatings and asphalt surfaces, felted surfaces, single ply and fibreglass roofs and wood. Used as a reinforcement with...