Follow us on:

Britannia Floor Paint | Concrete and Stone Paints

Britannia Floor Paint

FLOOR
BRI3090

Red or grey solvent-based, polyurethane coating for use on concrete and stone floors in the factory, warehouse, garage, corridor and utility room environments.

  • High performance.
  • Attractive mid-sheen appearance.
  • Hard wearing polyurethane finish.
  • Medium traffic use.
  • Resistant to many industrial chemicals and regular washing with water.
  • Offers excellent protection and provides a cleaner, dust-free working environment.
Colour
Size
£40.82(incl. VAT)
£34.02(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Britannia Floor Paint is a solvent-based polyurethane coating for use on concrete and stone floors in factory, warehouse, garage, corridor and utility room environments.

It is resistant to many industrial chemicals and regular washing with water, and its attractive mid-sheen appearance provides a cleaner, dust-free working environment.

Not recommended for use on Bitumen or Asphalt.



Quick Links - Click To Jump To Section:




Features & Benefits


  • One-pack product
  • Solvent-based
  • For use on concrete and stone floors
  • Resistant to many industrial chemicals and regular washing with water
  • Mid-sheen
  • Can be Brush or Roller (solvent resistant) applied
  • High performance
  • Hard wearing polyurethane finish
  • Provides a cleaner, dust-free working environment



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • Up to 60 square metres per 5 litre, dependent on substrate



Drying Times


  • Touch dry in 2-4 hours, dependent on ambient temperature, minimum over coating time of 16-24 hours

NOTE: Low temperatures can significantly extend the drying time.



Preparation


All surfaces to be painted should be clean and dry, free from dust, dirt, grease, oil, laitance and loose or flaking materials.

  • New concrete should be allowed to mature for a minimum of 6 months before paint can be applied
  • Chemically or mechanically hardened floors may need abrasion, prior to application
  • If in doubt always test a small area prior to use



Application


  • Stir well before use
  • Please follow the coverage rates shown in Spreading Rate Section
  • Coverage will vary dependent on the nature and porosity of the substrate and the application method
  • Priming is not normally required, however the first coat on concrete or porous surfaces, should first be thinned up to 10% with white spirit and allowed to dry
  • Britannia Floor Paint is touch dry in 2-4 hours dependent on ambient temperature
  • Applying an even coat, 2 coats are normally required, allowing a minimum over coating time of 16-24 hours

NOTE: Low temperatures can significantly extend the drying time.



Cleaning


  • Clean all equipment with white spirit immediately after use



Shelf Life & Storage


  • Up to 2 years if stored correctly in an unopened container



Precautions


  • Flammable keep away from sources of ignition
  • Ensure good ventilation during application
  • Wear gloves, goggles and suitable protective clothing
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
  • Keep out of reach of children
  • Do not use near fishponds
  • Toxic to aquatic organisms
  • May cause long term adverse effects in the aquatic environments
  • Do not empty into drains



Product Details
3090-800162

Data sheet

For Use By
Consumer Use
Interior / Exterior Use
Interior & Exterior
For Use On
Concrete, Stone
Application Method
Brush, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L
Touch Dry
2-4 hours, dependent on ambienttemperature, minimum over coating time of 16-24 hours.
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Concrete
Suitable For Use On
Stone
Application Method
Brush
Application Method
Roller
Components
1K
Product Usage Type
Topcoat
Colour Family
Grey
Colour Family
Red
Product Type
Polyurethane
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Britannia Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT