Follow us on:

Britannia Wallshield Pliolite Masonry Paint

WALLP
BRI3093

Offers all-year protection in 12 colours for many types of building substrates, even in cold temperatures (down to -5°C).

  • Up to 15 years protection
  • Solvent-based for exterior walls
  • Allows all year around exterior decoration
  • Showerproof in 20 minutes
  • Water-repellent
  • 2 years shelf life
Colour
Pick a Colour
  • Current colour: Ivory White
Close colour picker
  • White
  • Ivory White
  • Britannia Eggshell
  • Rustic Beige
  • Pearl Grey
  • Cream
  • Autumn Red
  • Rich Brown
  • Mild Rose
  • Champagne
  • Light Grey
  • Oak Grey
Size
Finish
£55.67(incl. VAT)
£46.39(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Britannia Wallshield Pliolite is a solvent-based coating offering all year round exterior decoration which provides up to 15 years protection.

The smooth and long lasting matt finish can be applied down to -5°C, and is showerproof in approximately 20 minutes after application.

Suitable for the decoration of external substrates including concrete, cement rendering, brick, stone, blockwork and pebbledash. Also suitably primed aluminium, iron work and surfaces previously painted with emulsion or oil paints.

Do not apply if there is a risk of heavy rain.

Do not use on bitumen coatings.

Not be used on high density, low suction substrates such as glazed bricks, faience tiles and engineering bricks.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Solvent-based
  • All year round exterior decoration
  • 15 years protection
  • Can be applied down to -5°C
  • Becomes showerproof in 20 mins
  • Can be brush, roller or spray applied
  • One-pack
  • Suitable for the decoration of external substrates including concrete, cement rendering, brick, stone, blockwork and pebbledash.
  • Also for suitably primed aluminium, iron work and surfaces previously painted with emulsion or oil paints.



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • As a general guide 6-8 square metres/litre per coat.



Drying Times


  • Touch Dry: 1 - 1.5 hour*
  • Recoatable after 16-24 hours* under normal drying conditions

*Drying time will vary according to temperature and humidity e.g. the drying time quoted will be significantly longer in cold, damp conditions.



Preparation


New Surfaces:

  • All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
  • Surfaces with suction (Porous surfaces) should be treated with an application of Britannia’s Stabilising Masonry Solution (see separate technical data sheet).

Previously Decorated Surfaces:

  • All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
  • Remove all loose, and failing or suspect material by scraping or brushing with a stiff bristle brush (not wire) to a sound edge.
  • Organic growth must be removed and the areas treated with Britannias Fungicidal Wash Solution. For surfaces in poor condition mechanical means may be necessary e.g. pressure washing between 1500-2000psi (102-136 bar), proprietary paint removal system, wet or dry grit blasting. Care must be taken not to damage the underlying surface.
  • Fill cracks and small defects in masonry surface with a proprietary ready mixed Filler and finish to match existing.
  • Stabilise all bare, filled and previously decorated chalking areas with the application of Britannia’s Stabilising Masonry Solution.
  • Wash any soundly adhering gloss painted surfaces with hot water and liquid detergent solution to remove any contaminants frequently changing the water. Wet abrade to provide a key. Rinse thoroughly with clean water to remove all residues.



Application


  • Supplied ready for use.
  • Please follow the coverage rates shown in Spreading Rate Section.
  • Stir well before using
  • Do not thin*.

*Except when extremely cold when up to 10% white spirit can be added for brush or spray application.

  • Apply by brush, medium or long pile roller depending on surface texture or by airless spray.
  • For airless spray use a minimum fluid pressure of 2000psi (136 bar) and a minimum tip size of 0.018 thou.
  • Mask as necessary with a wet strength grade masking paper.
  • Remove as much product as possible from application equipment before cleaning.
  • Replace lid firmly.



Cleaning


  • Clean equipment immediately after use with white spirit.



Shelf Life & Storage


  • Up to 2 Years if stored correctly and unopened under normal and frost free conditions.



Precautions


  • Flammable keep away from sources of ignition.
  • Ensure good ventilation during application.
  • Wear gloves, goggles and suitable protective clothes.
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice.
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water.
  • Keep out of reach of children.
  • Do not use near fishponds.
  • Toxic to aquatic organisms. May cause long term adverse effects in the aquatic environments.
  • Do not empty into drains.



Product Details
3093-896550

Data sheet

For Use By
Consumer Use
Interior / Exterior Use
Exterior Use
Colour
White
Colour
Cream / Neutral Shades
Single, Two or Three Pack
Single
Application
Brush, Roller, Spray
Coverage
As a general guide 6-8 square metres/litre per coat. Apply 2 Coats
Min. Application Temperature
(-5°C)
Touch Dry
Touch Dry: 1-1.5 hour. Recoatable after 16-24 hours under normal drying conditions.
Colour(s)
Standard Colours
Base Type
Solvent-Based
Suitable For Use On
Concrete
Suitable For Use On
Render
Suitable For Use On
Cement
Suitable For Use On
Brickwork
Suitable For Use On
Stone
Suitable For Use On
Blockwork
Suitable For Use On
Pebbledash
Finish
Matt
Application Method
Roller
Application Method
Brush
Application Method
Spray
Product Usage Type
Topcoat
Product Range
Wallshield
Colour Family
Beige
Colour Family
Red
Colour Family
Pink
Colour Family
Neutral
Colour Family
Cream
Colour Family
Grey
Colour Family
Brown
Colour Family
White
Categorised As
Smooth Masonry Finishes
Seasonal
Cold Weather
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Britannia Wallshield Pliolite Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like