- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
The leading all weather exterior use paint.
- 4,400+ colours for new or previously painted wood, metal, cladding, uPVC, stucco, brick, stone, cured concrete and more.
- Provides excellent resistance against cracking, blistering, chalking, and flaking.
- Weather-resistant silicon alkyd formula protects against rain and severe weather.
- Long-lasting finish with excellent colour retention, even in low temperatures down to 5°C.
- 15-year lifetime guarantee with proper application.
Important!
- Not suitable for application on floors.
- Colours mixed on a YE base only available in 2.5L sizes
- Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Zinsser Allcoat Exterior Gloss (Solvent Based) - Ideal Solution For All Exterior Surfaces
This high-performance paint is specifically designed to resist mould and mildew, ensuring your surfaces look bright and beautiful for years to come. Its silicon alkyd formula provides unparalleled weather resistance, making it suitable for the toughest conditions.
Application
For the best results, ensure surfaces are clean, dry, and free of any contaminants. Remove all loose or peeling paint and chalky residue. Sand edges of any remaining paint film until smooth. New surfaces must be cured for at least 30 days before painting.
- Surface Preparation: Abrade and degrease glossy surfaces. Prime new or bare surfaces with Zinsser Bulls Eye 123 or Zinsser Cover Stain as appropriate.
- Painting: Apply two coats using a synthetic bristle brush, roller, or sprayer. For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure.
- Conditions: Apply when air and surface temperatures are between 5°-32°C and humidity is less than 85%. Avoid direct sunlight and maintain a "wet edge" to prevent lapping.
Performance
Zinsser AllCoat Exterior Gloss (Solvent Based) ensures a durable and attractive finish. It dries to touch in 4 hours and is hard dry after 16 hours. Full adhesion and hardness develop in 7 days. Normal application is two coats, with an additional coat recommended for high-exposure areas such as sills and fascia boards.
Limitations and Recommendations
Do not apply if the temperature is likely to fall below 5°C during the drying time.
Zinsser AllCoat Exterior Gloss (Solvent Based) is not intended for application to exterior floors, decks, or any surface subject to water immersion or prolonged contact with water.
Cleanup
Clean application tools, spatters, and spills immediately with White Spirit. Follow equipment manufacturer’s directions to clean spray equipment, and remove dried product with White Spirit.
Health and Safety
Handle with care, using appropriate personal protective equipment. Store in a cool, dry, well-ventilated area away from heat and ignition sources. Dispose of contents and container in accordance with local, regional, national, and international regulations.
- UN Number: 1263
- Hazard Class: 3
- Contains: hydrocarbons, C9-C11, n-/ iso-/ cyclo-alkanes, < 2% aromatics, hydrocarbons, aromatic, C9
- Diisocyanates: None
Product Details
3122-897838
Data sheet
- Manufacturer
- Zinsser
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Wood
Stucco
Brickwork
Metal
Stone
Concrete
uPVC - Application Method
- Brush
Roller
Spray - Sheen
- Gloss
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L - Application
- Brush, Roller, Spray
- Coverage
- 10m² per litre
- Touch Dry
- 4 Hours
- UN Number
- UN1263
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Wood
- Suitable For Use On
- Windows
- Suitable For Use On
- Front Doors
- Suitable For Use On
- Garage Doors
- Suitable For Use On
- UPVC
- Suitable For Use On
- Masonry
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Stucco
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Zinsser
- Components
- 1K
- Product Usage Type
- Topcoat
- Product Range
- AllCoat Exterior
- Fastest Delivery
- Next Working Day
- Type of Wood Finish
- Wood Paint
- Colour Family
- Anthracite Grey
- Colour Family
- Chartwell Green
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Categorised As
- Multi-Surface Cladding Paints
- Seasonal
- Cold Weather
Questions
Question about the product
Linda
on
2022-08-14 11:25:58
| Question:
I would like to paint the rough inside of my fibre glass garage door. As it is , it is a magnet for dust and grime … I would like to be able to wipe it clean . Which paint would you suggest? |
Answer from Rawlins’ Technical Team:
Assuming the fibre glass door is clean, dry, sound and prepared as detailed in the technical data sheet this product would be suitable. The area should be sanded and degreased prior to application. | |
|
Adrian
on
2020-07-07 21:28:32
| Question:
What sort of preparation is needed to paint UPVC plastic doors? |
Answer from Rawlins’ Technical Team:
Assuming the doors are aged UPVC they must be cleaned and lightly abraded prior to application of two coats. We recommend Zinsser Allcoat Exterior Water based for this application when temperatures are above 8°C. | |
|
Aathy Logan
on
2020-04-08 11:16:44
| Question:
Can this be applied over previously woodstained external windows and doors? Thanks |
Answer from Rawlins’ Technical Team:
Assuming the timber is of sound condition and preparation is undertaken as detailed in the Technical Data Sheet yes it can be used for previously wood stained windows and doors. If there is any mould and mildew, use Blackfriar Fungicidal Wash. Timber at risk from decay or insect attack should be treated with Blackfriar Exterior Wood Preservative Gold Star Clear. Very hard or glossy previously painted surfaces should be abraded and degreased prior to application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinsser AllCoat Exterior Gloss (Solvent Based) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Zinsser Cover Stain
High-performance, solvent-based primer-sealer in 2,900+ colours. Suitable for both interior and exterior surfaces including wood, plaster, metal, masonry, and more. Fast Drying: Recoat in less than 2 hours. High Hiding Formula: Blocks tough stains such as water, fire, smoke, and nicotine. Excellent Adhesion: Sticks to all surfaces...
Price
£17.82
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Zinsser Universal Degreaser & Cleaner
Water-based detergent. It can be used on tiles, grout, baths, sinks, showers, tools, equipment, machinery, driveways, BBQs, and ovens. Removes tough stains such as grease, oil, paint overspray, adhesive, wax, food stains, and more. Ideal for cleaning surfaces before painting, ensuring a smooth, residue-free finish. Suitable for both...
Price
£8.45
(incl. VAT)
In Stock and Available for Delivery
Zinsser Mould Killer & Remover
Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...
Price
£8.45
(incl. VAT)
In Stock and Available for Delivery