- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2,500+ Colours.
- Quick-drying, low-odour, water-thinned primer and finish coat.
- Excellent adhesion, stain-blocking, and anti-corrosive properties.
- For ferrous and non-ferrous metals, plastics, ceramic tiles, glass, wood, and existing painted surfaces.
- Weather and light resistant.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Bradite One Can Eggshell
Bradite One Can Eggshell is a dual-purpose primer and finish solution designed for both professional and DIY use. Its quick-drying nature means that surfaces can be ready for re-coating in just one hour under normal conditions. The low odour and water-based formula make it easily applicable in a wide range of areas compared to solvent-based alternatives. It is especially effective at promoting adhesion to various substrates, including ferrous and non-ferrous metals, plastics, ceramics, and wood.
Applications
Whether you're coating exterior cladding, metal surfaces, or plastics such as uPVC, this product offers reliable performance. It is ideal for use on surfaces previously coated with materials like coil, plastisol, and powder coatings, requiring minimal preparation. Additionally, it locks in stains such as watermarks, nicotine, and even hard wood resin, providing a clean base for further coats.
Preparation and Application
Proper surface preparation is crucial for achieving the best results. All surfaces must be free from dust, grease, and moisture before application. For metals, it's recommended to degrease and lightly abrade the surface. Plastics and uPVC surfaces should be treated with methylated spirits before application. For the best finish, apply at least two coats, with up to three coats needed for high stain-blocking or anticorrosive performance.
Limitations and Restrictions
This product is not recommended for lime or natural plasters. Additionally, it should not be used on damp surfaces or on green oak that has not been weathered for at least six months. Over-application may result in prolonged drying times, and applying to poorly prepared surfaces can compromise adhesion.
Recommended Products
For additional protection on heavily rusted surfaces, consider using Bradite Rust Converter RC46 before applying this product. For cleaning and degreasing, Bradite TD39 Industrial Degreaser is recommended. Always refer to the downloadable datasheets for detailed product specifications and application guidance.
Health and Safety
- UN Number: 3082
This product is classified as hazardous to aquatic life with long-lasting effects. It contains zinc oxide and trizinc bis(orthophosphate). Always wear gloves and protective eyewear when handling. Refer to the product's MSDS for full safety guidelines.
Product Details
3144-1036691
Data sheet
- Manufacturer
- Bradite
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Wood, Metal, uPVC, Glass, Aluminium, Stainless Steel, Galvanised Steel, Copper
- Application Method
- Brush, roller, conventional air spray, airless spray
- Sheen
- Eggshell
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Application
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 1 hour minimum - Unlimited
- Fully Cured (at 20°C)
- 7 days
- Coverage
- 11m2 per Litre
- Min. Application Temperature
- 10°C
- Density
- 1.24 kg/L
- Shelf Life (from date of manufacture)
- 2 years minimum in original unopened containers
- Touch Dry
- 30 Mins
- Recommended Dry Film Thickness
- 35 microns/coat
- Recommended Wet Film Thickness
- 75 - 100 microns/coat
- Flammability
- Non-flammable
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Non-Ferrous Metals
- Suitable For Use On
- UPVC
- Suitable For Use On
- Glass
- Suitable For Use On
- Ceramic Tile
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Wood
- Suitable For Use On
- Melamine Surfaces
- Finish
- Eggshell
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- One Can
- Type of Wood Finish
- Wood Paint
- Suitable For
- Walls & Ceilings
- Colour Family
- Blue
- Colour Family
- White
- Colour Family
- Brown
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Black
- Colour Family
- Red
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Cream
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Off-White
- Categorised As
- Multi-Surface Cladding Paints
 Jon Austin on 2024-09-03 16:54:00 | Question:
Is Bradite One Can eggshell suitable for cast iron without a primer? I am looking to paint an old cast iron lamp post. |
Answer from Rawlins’ Technical Team:
Assuming the cast iron is clean, dry, sound and prepared as detailed in the technical datasheet, this product could be applied direct to this surface, with a 2-3 coat application recommended. It is classified as a Primer/Finish product. | |
| Bill Winder on 2024-06-18 11:07:14 | Question:
Can this paint be used on an external varnished door? |
Answer from Rawlins’ Technical Team:
Assuming the door is a varnished timber door, that is clean, dry and sound, we'd recommend sanding the existing coating with 120 grit sandpaper to remove as much varnish as possible, followed by 3 full coats of Bradite One Can Eggshell in your choice of many RAL, BS or NCS Colours to finish. | |
| Craig Fleming on 2024-01-16 16:04:10 | Question:
Hi, could this be used on windows to stop light coming in? |
Answer from Rawlins’ Technical Team:
Assuming the glass is thoroughly cleaned and degreased to ensure the removal of all surface contaminants, grease and oils, this product can be applied direct to glass, however when painting glass brush strokes can be visible from the other side of the glass. It is recommended to apply 3 full coats to achieve the intended outcome, as it is a 3-in-1 product it will prime, seal and stain block the glass for the intended finish. This is a non-removable product once the glass has been coated, assuming you would like the option of a removable product, you could consider Coo-Var White Glass Shading. | |
| Amanda Bruce on 2023-01-24 15:06:07 | Question:
How long is the guarantee on a front door before it would need re-painting? Also why would it keep flaking in some parts despite sanding and re-coating, particularly around beading? |
Answer from Rawlins’ Technical Team:
If flaking is occuring there could be a few possible causes, please can you provide more information and pictures of the areas to [email protected]. | |
| graham on 2021-09-17 15:32:25 | Question:
can you use this product Bradite One eggshell for painting modern kitchen cupboards, that are made of mdf with a coating on top |
Answer from Rawlins’ Technical Team:
Assuming you check for compatibility and adhesion prior to full application, the substrate is clean, dry, sound and prepared as detailed in the technical data sheet then yes. If you are looking for a scuff resistant and scrubbable option assuming you check for compatibility and adhesion prior to full application we can recommend Zinsser Bulls Eye 1-2-3 followed by Zinsser Perma-White Interior. | |
| Jo on 2021-08-31 07:15:25 | Question:
The decorator is wanting to put a primer on my old wood internal staircase so he can see where it needs filling and any imperfections, is it ok to use your ok to use your Bradite One Can on top of normal primer, also which would you suggest best for internal old wood staircase, (you have so many) ie quick drying. Thank you |
Answer from Rawlins’ Technical Team:
Bradite One Can is suitable for both application to bare or previously painted timber and would be classed as a primer/finish. We would not recommend this product be used on any areas that would be walked on. | |
| [email protected] on 2021-07-19 14:05:01 | Question:
How do I clean the PVC door before applying the paint |
Answer from Rawlins’ Technical Team:
Assuming the door is UPVC we would recommend using Bradite Industrial Degreaser. | |
| Sarah on 2021-05-30 10:39:56 | Question:
Hello, I see that this can be used for a vinyl wardrobe, can it also be used on vinyl flooring? I have a very small area at the bottom of my stairs that I’d like to paint. Many thanks, |
Answer from Rawlins’ Technical Team:
We would recommend you test for compatibility and adhesion prior to application as it does not list vinyl as a substrate. This is not suitable for use on a floor, assuming the vinyl floor is clean, dry, sound, prepared as detailed in the technical data sheet, you also test for compatibility and adhesion prior to application we can recommend Smartkote Protectakote UVR Smooth. This is available in black, white or clear. | |
| Raz on 2020-06-03 11:10:00 | Question:
Hi, can this be used on exterior aluminium. If yes, what prep does it need before. Many thanks |
Answer from Rawlins’ Technical Team:
Assuming the aluminium is clean, dry, degreased and abraded prior to application Bradite One can can be used on External Aluminium. | |
| Mike Sometville on 2019-02-25 11:29:45 | Question: I have fitted wardrobe which has a vinyl surface finish. Does the vinyl need any prep to ensure adhesion. Thanks |
Answer from Rawlins’ Technical Team: Bradite One Can would be suitable for painting over vinyl coated wardrobes, clean and degrease using Bradite Industrial Degreaser diluted with 9 parts warm water and scrubbing, rinse with clean water and allow to dry. Apply three coats allowing not less than 1 hour between coats, in the colour of choice. | |
| Alistair Spiers on 2019-02-04 14:38:12 | Question: Is it possible to get your one can paint in clear? We have some very old interior wood cladding that the client wants to have a colour wash finish,so we don't want to obliterate the grain with a primer,but do want to block the knots and seal rusty nails.thanks Alistair |
Answer from Rawlins’ Technical Team: Bradite One Can is not available in clear. Zinsser SealCoat would be a good product to try. It will seal the knots and rust stains. It may pay to put a couple of coats on where there are rust stains. You can then apply a colour wash coat over the SealCoat. You may need to do some tests with the colour wash over the Sealcoat. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bradite One Can Eggshell is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Bradite Industrial Degreaser
Low-foaming, aqueous pink alkaline detergent designed for degreasing contaminated surfaces. Ideal for oily or soiled surfaces, especially for removing road dirt. Cleans thoroughly prior to painting.
Price
£67.94
(incl. VAT)
In Stock and Available for Delivery
Bradite Fastrac Rust Converter
Bradite Fastrac Rust Converter is a high performance, single-pack, water-based rust converter intended for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Especially suited for objects which may be difficult to sand blast such as; fences, iron railings, guttering and outdoor...
Price
£45.36
(incl. VAT)
In Stock and Available for Delivery
Bradite One Can Matt
2,500 Colours. Quick-drying primer and finish coat. For masonry, metals, plastics, wood, glass, ceramic tiles, and previously painted surfaces. Interior/exterior use. High adhesion, stain blocking, and anti-corrosive properties.
Price
£33.14
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery