- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Clear mineral acid solution designed for pre-treatment of bare concrete.
- Removes excess lime and prepares the surface for coatings.
- Professional use only.
Bradite Acid Etch
This acid etch solution is specifically formulated for professional pre-treatment of bare concrete surfaces. Its mineral acid composition is ideal for removing excess lime from concrete and etching a smooth surface profile that enhances adhesion for future coatings. When used correctly, it provides an effective and reliable surface preparation solution that ensures longevity and effectiveness of floor coatings.
Key Features
- Removes surface laitance and lime from concrete surfaces efficiently.
- Creates a smoother surface profile, essential for better coating adhesion.
- Applied with a brush for even distribution and optimal coverage.
- Recommended for professional use in preparing concrete surfaces for painting or other coatings.
- Complies with ISO 9001:2015 and ISO 14001:2015 standards, ensuring product quality and environmental responsibility.
Application Instructions
Before using the product, ensure the surface is cleaned and degreased using an appropriate degreaser, such as Bradite Degreaser TD39, or by steam cleaning. Apply the acid etch solution evenly with a soft brush and allow it to react for 10 to 20 minutes. Depending on the amount of surface laitance, multiple applications may be required. Once the solution has reacted, thoroughly rinse the area with clean water to remove soluble salts and loose particles. Continue rinsing until the surface shows a neutral or weakly alkaline pH when tested with litmus paper.
Recommendations
For best results, allow the treated surface to fully dry before vacuuming and applying any subsequent coatings. We recommend using Bradite floor coatings for optimal performance and finish. It is important to avoid using this product on surfaces other than bare concrete. Do not spray under any circumstances.
Health and Safety
UN Number: 1789
This product contains up to 9% Hydrochloric Acid and must be handled with care. Always wear protective gloves, clothing, and eye protection when using the product. In case of skin or eye contact, wash immediately with water and seek medical attention if necessary.
Data sheet
- Manufacturer
- Bradite
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Tile, Block Paving, Brickwork, Wood
- Application Method
- Brush
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 25L
- Application
- Brush
- Coverage
- 20m2 per Litre
- Density
- 1.01 kg/L
- Colour(s)
- Clear
- Base Type
- Acid
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Components
- 1K
- Product Usage Type
- Acid Etch
- Colour Family
- Clear
- Product Type
- Acid Etch
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bradite Acid Etch is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT