- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 1,800 colours, durable for up to 15 years.
- Can be applied on bonded paint & coatings, render, brick, stone, rough-cast, and other masonry substrates.
- All-weather application suitable for temperatures as low as -5°C.
- Highly water-resistant and offers excellent adhesion.
- Breathable finish that allows for moisture control.
- Rain resistant within 20 minutes of application, ensuring durability in various weather conditions.
- Textured matt version is also available here.
Product customisation
Don't forget to save your customization to be able to add to cartWethertex PP77 All Weather Pliolite Masonry Paint - Premium Solvent-Borne Coating
Designed for use on various masonry surfaces. Formulated with advanced Pliolite technology, this paint offers excellent adhesion and durability, even in adverse weather conditions. It can be applied in temperatures as low as -5°C, making it ideal for all-year-round use.
Application Instructions
- Ensure all surfaces are clean, dry, and free from algae, lichen, and other growths before application.
- Repair cracks and structural defects. Remove any existing crazed or flaking paint, dirt, grease, or other contaminants.
- Apply Wethertex C10 Fungicidal Wash if there is evidence of organic growth, following the manufacturer's instructions.
- Stir the paint thoroughly before use. Apply using a brush, short pile roller, or spray in temperatures ranging from -5°C to 25°C.
- For very porous surfaces, thin the product by no more than 10% using clean white spirit for a penetrating base coat. Do not thin for normal application.
- Apply two coats for optimal coverage and protection.
Storage and Handling
Store in a dry place at temperatures above 5°C. Ensure the container is tightly sealed when not in use. Avoid the risk of spillage by storing and transporting in a secure, upright position. Clean all equipment with clean white spirit immediately after use. Dispose of waste material according to local regulations. Do not empty waste into drainage systems.
Important Usage Guidelines
- Avoid application if heavy rain is forecast or if relative humidity exceeds 95%.
- Do not apply in direct sunlight, on hot surfaces (above 30°C), or when the substrate is below +1°C.
- Protect the coated surface from heavy rain, direct sun, or wind during the first 24 hours after application to prevent damage, wash-off, or discolouration.
- If these parameters are not met, the performance and durability of the product may be compromised.
Health and Safety
Refer to the downloadable data sheet for detailed safety information. Key points include:
- UN Number: UN1263
- Classification: Flammable liquid and vapour, harmful if inhaled, causes skin irritation and serious eye irritation, toxic to aquatic life with long lasting effects.
- Contains Diisocyanates: No
Data sheet
- Manufacturer
- Wethertex
- Interior / Exterior Use
- Exterior Use
- For Use On
- Render
Brick
Stone
Masonry Walls - Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Colour
- Colour Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Touch Dry (at 20°C)
- 1-2 Hours
- Dry to Recoat (at 20°C)
- 16-24 Hours
- Fully Cured (at 20°C)
- 7-10 Days
- Coverage
- 4-15m² per litre
- Min. Application Temperature
- (-5°C)
- UN Number
- UN1263
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Render
- Suitable For Use On
- Masonry Walls
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Wethertex
- Usages
- Water Resistant Coat
- Product Usage Type
- Topcoat
- Product Range
- Pliolite
- Fastest Delivery
- Next Working Day
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Chartwell Green
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Categorised As
- Smooth Masonry Finishes
- Seasonal
- Cold Weather
Questions
Question about the product
Roy on 2022-10-09 13:29:58 | Question:
How long should you wait before applying the second coat? |
Answer from Rawlins’ Technical Team:
3 to 4 hours is recommended between coats. | |
CMS on 2022-09-27 15:10:06 | Question:
what is the coverage on brick and do you need a base coat |
Answer from Rawlins’ Technical Team:
Assuming the brickwork is porous, bare, clean, dry sound and prepared as detailed in the technical data sheet we would recommmend two coats are applied with the first coat thinned no more that 10% with Bartoline White Spirit followed by an undiluted second coat. Regarding coverage, you can expect approximately 4 to 8m² per litre for the first coat and 10 to 15m² per litre of the second coat. | |
John on 2022-08-09 20:55:46 | Question:
Is weathertex pp77 suitable for use on lime render |
Answer from Rawlins’ Technical Team:
Unfortunately no this is not suitable for application to lime render. Assuming the lime render is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Zinsser AllWeather Exterior Masonry Paint (Solvent Based). This is available in many RAL, NCS or BS colours in a matt finish. | |
Mel on 2022-06-06 15:44:18 | Question:
I’m having my house re rendered in standard sand & cement. 1 How long should I wait until painting it ? 2 Will the bare surface require any additional treatment before painting? Thanks |
Answer from Rawlins’ Technical Team:
The render must be fully cured, clean, dry, sound and prepared as detailed in the technical data sheet prior to application. The render used and thickness applied will dictate the time this would take. Loose or friable substrates can be treated with Wethertex ST1 Quick Dry Stabilising Primer prior to application. If this is not the case the product may be thinned by no more than 10% for use as a penetrating base coat on very porous surfaces. | |
Richard on 2021-11-08 22:40:08 | Question:
Is this breathable to a high standard? |
Answer from Rawlins’ Technical Team:
This product is highly water resistant and listed as breathable. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Wethertex PP77 All Weather Pliolite Masonry Paint - Smooth Matt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Wethertex C10 Multi-Surface Fungicidal Wash
Colourless water based masonry wash. Ideal for use on masonry and wood surfaces. Effectively removes bacterial, algal, and fungal growth. Fast-acting bioactive technology for efficient cleaning. Ready-to-use water-based solution. Provides long-term protection and low maintenance.
Wethertex CP80 Clad-Seal Steel & Cladding Coating
4,350+ colours for steel and cladding. Plastisol, weathered galvanised, PVF2, ferrous and non-ferrous metals, and various other substrates. Self-priming, exterior quality satin paint with high water resistance and rust protection. Quick drying with excellent adhesion and extended maintenance cycles. Environmentally friendly and chemical...
Wethertex HBS Flex-Coat Hi-Build Masonry Paint
High-quality, heavily textured flexible masonry paint in 1,600+ colours. Ideal for use on existing paint coatings, render, plaster, and building boards. Utilises advanced Optilife silicone technology for exceptional breathability and waterproofing. Extremely flexible, making it perfect for renovating uneven, weathered areas or small...
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint
High-quality opaque satin finish timber paint available in 4,350+ colours. Ideal for all exterior wood and timber substrates providing up to 12 years of weather protection. Developed using advanced Optilife silicone technology for high breathability and flexibility. Quick-drying formula, suitable for application by brush, roller, or...
Wethertex ST1 Quick Dry Stabilising Primer
High-performance quick dry stabilising primer. Ideal for use on masonry and previously painted surfaces. Penetrates deeply into substrates for ultra-high adhesion. Enhances the application of Wethertex masonry paints with minimal delay. Contains biocides for protection against microbial growth. High vapour permeability for breathable...
Wethertex WB1 WeatherBLOCKER
Long-lasting protection against damp, available in clear and white. Suitable for use on brick, stone, concrete, and renders. Utilises advanced nano-technology for deep penetration and up to 25 years of protection. UV resistant, ensuring durability and sustained performance. Easy application with brush, roller, or airless spray....
Wethertex Textured Rollers
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below.