- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Keim Soldalit Grob is a primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.
- Equalises differences in texture
- Multipurpose application
- Alkaline
- Non-flammable
- Water vapour permeable, microporous
- No solvents and plasticisers added
- Cradle to Cradle Certified Silver
Keim Soldalit Grob is a primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.
Top Features & Benefits
Keim Soldalit Grob is a non-film forming basecoat that fills hairline cracks and boats the following additional features:
- Equalises differences in texture
- Multipurpose application
- Alkaline
- Non-flammable
- Water vapour permeable, microporous
- No solvents and plasticisers added
- Cradle to Cradle Certified Silver
Preparation & Application
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application using KEIM Soldalit Grob may proceed. KEIM Contact Plus can be used instead of KEIM Soldalit Grob as a base coat for large cracks over 1mm in width or where there is a need to equalise the surface.
Application
In most instances KEIM Soldalit Grob should be applied undiluted and can be applied by brush, roller, or, spray. After a minimum waiting period of at least 12 hours KEIM Soldalit in the chosen colour may be applied.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Clean tools with water immediately after use.
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Single, Two or Three Pack
- Single
- Application
- Brush, Roller, Airless Spray
- Coverage
- Approx. 0.25kg/m2 Keim Soldalit Grob.
- Min. Application Temperature
- 5°C
- Colour(s)
- White
- Base Type
- Water-Based
- Suitable For Use On
- Cracks
- Finish
- Textured Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- C2C SIlver
- Usages
- Crack Bridging
- Usages
- Levelling/Equalising
- Product Usage Type
- Filler
- Product Range
- Soldalit
- Colour Family
- White
- Categorised As
- Masonry Primers
- Product Type
- Levelling/Equalising
- Product Attributes
- Crack Bridging
Questions
Question about the product
Robert Snellgrove on 2019-11-05 15:04:54 | Question:
What is the maximum width of crack that this product will bridge? |
Answer from Rawlins’ Technical Team:
Keim Soldalit Grob can bridge approximately 0.5mm. There is also Keim Contact Plus Grob which will bridge up to 1mm. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim Soldalit Grob is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT