- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Highly specialised mineral paint system for use on exterior surfaces.
- Highly water repellent
- Water vapour permeable, microporous
- Non-film forming
- No solvents and plasticisers added
- Resists algal and fungal growth
- High weathering resistance
- UV and acid resistant, anti-static
- Photocatalytic action with multipurpose application
- Cradle to Cradle Certified Silver
Product customisation
Don't forget to save your customization to be able to add to cartKEIM Soldalit ME is a highly specialised mineral paint system based on a binding agent combination of silica sol and potassium silicate, for use on exterior surfaces. This combination allows the application of mineral coatings not only onto mineral, but also on a variety of previously painted surfaces directly without the use of any stabilising agents.
Top Features & Benefits
- Highly water repellent
- Water vapour permeable, microporous
- Non-film forming
- No solvents and plasticisers added
- Resists algal and fungal growth
- High weathering resistance
- UV and acid resistant, anti-static
- Photocatalytic action with multipurpose application
- Cradle to Cradle Certified Silver
Preparation & Application
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed. Highly absorbent or friable substrates should be treated with Keim Soldalit Fixativ.
Application
Keim Soldalit-ME should be applied as a two coat undiluted system. Can be applied by brush, roller, or air-less spray with a minimum period of 12 hours between coats.
Clean tools with water immediately after use.
Images of Keim Soldalit-ME in Use
NBS Specifications
The NBS (National Building Specification) is a UK-based specification launched in 1973 and is used by building professionals and architects to describe the materials, standards and workmanship of a construction project. Keim provides documentation specific to this product that outline the NBS specifics. You can download these documents by locating the Keim Soldalit-ME product at the following link: Download the NBS Documents Here
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Colour
- Colour Tintable
- Single, Two or Three Pack
- Single
- Application
- Brush, Roller, Airless Spray
- Coverage
- Approx. 0.45kg/m2 Keim Soldalit-ME for two coats.
- Min. Application Temperature
- 5°C
- Touch Dry
- Minimum period of 12 hours between coats.
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Base Type
- Sol-Silicate
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Mineral Substrates
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- C2C SIlver
- Product Usage Type
- Topcoat
- Product Range
- Soldalit
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- White
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Brown
- Categorised As
- Silicate & Mineral Masonry Paints
- Product Type
- Sol-Silicate
Questions
Question about the product
Paul Carter on 2024-10-24 13:53:30 | Question:
Can it be used on concrete? |
Answer from Rawlins’ Technical Team:
Assuming application is to masonry, and the concrete isn't walked on, it is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be used for this type of application. We'd recommend 2 coats to achieve the desired finish. | |
Alex on 2023-08-10 09:55:52 | Question:
What is the Kg size tubs equivalent to in liters (approximately) 5kg = litres ? 18kg = liters ? Thanks |
Answer from Rawlins’ Technical Team:
This products coverage ratio is in kilos. So the manufacturer does not list the tin size in litres, but the 5kg tin is approximately 3.5ltr, the 18kg is approximately 12.5ltr. | |
Alan McCusker on 2023-05-30 10:34:34 | Question:
Hi, how many Kg's do I need for 378m2 x 2 coats? |
Answer from Rawlins’ Technical Team:
The approximate coverage rate for this product is 0.45kg per m² for the two coats. For 378m² you would require 170.1kg | |
Tim Austen on 2019-12-06 07:07:40 | Question:
Hi how much paint in kg will be needed for 2 coats of 30sqm.thanks |
Answer from Rawlins’ Technical Team:
13.5kg | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim Soldalit ME Mineral Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT