- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A ready to use silica-sol interior mineral paint in 250+ exclusive colours, suitable for all conventional interior wall and ceiling surfaces whether unpainted or previously painted.
- With MacroFill technology for maximum light scattering
- Abrasion resistant
- Outstanding hiding power and economic consumption
- Resists mould growth (certified resistance to fungi)
- In accordance with DIN EN 3 300
- Cradle to Cradle (C2C) Certified Silver and Gold
- Not suitable for: wood substrates; lacquered surfaces; substrates with salt efflorescences
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Keim Optil is a ready to use silica-sol interior mineral paint in accordance with DIN EN 3 300. Keim Optil is suitable for all conventional interior wall and ceiling surfaces whether unpainted or previously painted, and is particularly suitable for the creation of interior designs with specific requirements for high colour intensity and appearance, in prestigious architecture and poor lighting conditions.
Top Features & Benefits
Keim Optil is optimised for application in areas with glancing lighting conditions. In addition to this, Keim Optil boasts the following features:
- With MacroFill technology for maximum light scattering
- Intense and lightfast colour shades
- Abrasion resistant
- Outstanding hiding power
- Economic consumption
- Highly vapour permeable
- Non-flammable
- Resists mould growth (certified resistance to fungi)
- Low environmental impact
- Fire behaviour: non-flammable (Class A2-s1,d0 as per EN 13501-1 acc. to classification report)
- Cradle to Cradle Certified Silver and Gold
Preparation & Application
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Optil may proceed.
Application
Keim Optil should be applied by brush or roller with a minimum period of 12 hours between coats.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces.
Consumption
0.250lt per square metre for two coats. Consumption rates are offered for guideline purposes only and are quoted for smooth surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Clean tools with water immediately after use.
NBS Specifications
The NBS (National Building Specification) is a UK-based specification launched in 1973 and is used by building professionals and architects to describe the materials, standards and workmanship of a construction project. Keim provides documentation specific to this product that outline the NBS specifics. You can download these documents by locating the Keim Optil product at the following link: Download the NBS Documents Here
Product Details
3450-888377
Data sheet
- Manufacturer
- Keim
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- Application Method
- Brush
Roller - Single, Two or Three Pack
- Single
- Pack Size
- 5L
12.5L - Coverage
- Approx. 0.250 L/m² for two coatings
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Usages
- C2C SIlver
- Product Usage Type
- Topcoat
- Product Range
- Optil
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Leigh
on
2024-11-06 12:42:00
| Question:
Can this product be sprayed? |
Answer from Rawlins’ Technical Team:
Yes, this product can be applied by airless spray (nozzle > 423), with the first coat diluted by a maximum of 10% water if required, before a second coat undiluted. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim Optil is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT