- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Bonds structural steel and ductwork protection boards in internal situations.
- Sodium silicate adhesive
- Bonds in 5 minutes
- Fully cured in 8 to 12 hours
- Forms a water-resistant seal unaffected by moisture
- Forms to a non-combustible film to BS 476 Part 4: 1970
Nullifire FO142 Intutac provides a water-resistant seal that is unaffected by moisture and is an adhesive for use in fire protection applications.
The sodium silicate adhesive has a buttery consistency that dries to form a non-combustible film to BS 476 Part 4: 1970.
Installation
- Read Intutac safety data sheet before starting work.
- Surfaces should be clean and dry, free of dust, grease and
loose material. - Stir Intutac thoroughly and apply evenly over the surface to be bonded using a brush or flat-bladed tool at a rate of 2.5 m² per litre.
Specifications
- Drying time: bond time 0 to 5 minutes
- Full cure: 8 to 12 hours
- Coverage: 2.5 m²/l
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Interior / Exterior Use
- Interior Use
- Single, Two or Three Pack
- Single
- Base Type
- Sodium Silicate
- Suitable For Use On
- Structural Steel
- Suitable For Use On
- Ductwork
- Application Method
- Brush
- Application Method
- Spatula
- Product Usage Type
- Adhesive
- Colour Family
- Off-White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Nullifire FO142 Intutac Brush Grade Silicate Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Nullifire Accessories For Fire Protection
An extensive range of accessories and ancillary products for use with Nullifire (Firetherm) systems, helping the installation and application of firestopping products. Refer below to see the full range. More Information Delivery Info
Nullifire FJ203 Fire Resistant Backer Rod
Firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc. Can be used alone or in combination with Nullifire FS703...
Nullifire FO143 Intutac Gun Grade Silicate Adhesive
Silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry. Up to 240 minutes fire resistance Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre boards, or for materials that require bonding and resistance...