- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Carboline Carbocrylic 1295 HS is a high solids topcoat for steel and concrete surfaces, to provide good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. Recommended for chemical industry, offshore, power and heavy industry.
- Two-component High Solids Acrylic Epoxy Finish
- Offers excellent corrosion and weathering protection.
- NORSOK Approved for offshore
- Available in 350+ colours, including RAL and BS
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Carboline Carbocrylic 1295 HS is a high solids topcoat for steel and concrete surfaces, to provide good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. Recommended for chemical industry, offshore, power and heavy industry.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Application Conditions
- Health & Safety
Features & Benefits
- Two-component High Solids Acrylic Epoxy Finish
- Offers excellent corrosion and weathering protection.
- NORSOK Approved for offshore
- Available in 350+ RAL colour shades
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Carboline Carbocrylic 1295 HS | ||||||
| Volume Solids: | 62 ± 2% | |||||
| Dry Temperature Resistance: | Continuous: 120°C (248°F) | |||||
| Non-Continuous: 150°C (302°F) | ||||||
| Theoretrical Coverage Rate: | 8,3 m²/l at 75 µm. | |||||
| Allow for loss in mixing and application | ||||||
| Dry Film Thickness: | 50 - 150 microns (1.95 - 5.9 mils) per coat | |||||
| Topcoats: | Normally not topcoated | |||||
| Limitations: | Not recommended for immersion service | |||||
| Density: | 1.29 g/cm³ depending on color | |||||
| Shelf Life: | 24 months at 24°C | |||||
| Storage: | Store indoors | |||||
| Storage Temperature & Humidity: | 5° - 45°C, 0-95% RH | |||||
| Flash Point (Setaflash): | 1295 HS Part A 27°C | |||||
| 1295 HS Part B 16°C | ||||||
| Packaging: | Part A 16.1 litres | |||||
| Part B 2.3 litres | ||||||
Drying Times
| Curing Schedule | |||||
|---|---|---|---|---|---|
| Surface Temperature | Dry To Touch | Dry To Handle | Dry To Recoat | Final Cure | |
| 4°C (39°F) | 12 Hours | 20 Hours | 48 Hours | 9 Days | |
| 16°C (61°F) | 5 Hours | 8 Hours | 20 Hours | 5 Days | |
| 24°C (75°F) | 3 Hours | 5 Hours | 12 Hours | 3 Days | |
| 29°C (84°F) | 2 Hours | 3 Hours | 8 Hours | 2 Days | |
- These times are based on 75 µm dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure.
Surface Preparation
General
- Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
Steel
- Apply over clean, dry primers, or intermediate coats as recommended.
Concrete
- Apply over clean, dry primers, or intermediate coats as recommended.
Application Methods
| Product Information | |||||
|---|---|---|---|---|---|
| Mixing: | Power mix separately, then combine and power mix | ||||
| Thinning: | May be thinned up to 10% with Thinner no.41 | ||||
| Use of thinners other than those supplied or recommended by Carboline may adversely affect product warranty whether expressed or implied. Contact Rawlins on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected] for further information. | |||||
| Ratio: | 7:1 Ratio (A to B) by volume | ||||
| Conventional Spray: | Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, 0.052” fluid tip and appropriate air cap. | ||||
| Pot Life: | 3 Hours @ 24°C and less at higher temperatures | ||||
| Airless Spray: | Pump Ratio: 30:1 | ||||
| GPM Output 3.0 (minimum) | |||||
| Material Hose: 3/8" I.D. (minimum) | |||||
| Tip Size: 0.013” - 0.017” | |||||
| Output PSI: 2000-2300 | |||||
| Filter Size: 60 mesh | |||||
| Brush & Roller (General): | Brush and roller recommended for small areas only. | ||||
Application Conditions
| Product Application Conditions | |||||
|---|---|---|---|---|---|
| Condition | Material | Surface | Ambient | Humidity | |
| Minimum | 10°C (50°F) | 4°C (39°F) | 4°C (39°F) | 0% | |
| Maximum | 35°C (95°F) | 55°C (131°F) | 50°C (122°F) | 90% | |
- Industry standards are for substrate temperatures to be 3°C above the dew point. This product simply requires the substrate temperature to be above the dew point.
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
3644-856272
Data sheet
- Manufacturer
- Carboline
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel Structures
Concrete Structures
Offshore Structures - Application Method
- Brush
Roller
Spray - Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Touch Dry (at 20°C)
- 3 hours
- UN Number
- UN1263
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Suitable For Use On
- Steel Structures
- Suitable For Use On
- Concrete Structures
- Suitable For Use On
- Chemical Industry
- Suitable For Use On
- Offshore
- Suitable For Use On
- Heavy Industry
- Suitable For Use On
- Power Industry
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Carboline
- Components
- 2K
- Usages
- High Solids
- Usages
- Atmospheric
- Usages
- Isocyanate Free/Non-Isocyanate
- Usages
- Weather Resistance
- Usages
- Easy to Clean
- Product Usage Type
- Topcoat
- Product Range
- Carbocrylic
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Aluminium
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 3 hours
- Resistance to
- Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Carboline Carbocrylic 1295 HS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
