- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Carboline Carboguard 890 MIO is a highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets.
- Excellent chemical resistance
- Surface tolerant characteristics
- Self-priming
- Available in 350+ colours, including RAL and BS
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartCarboline Carboguard 890 MIO is a highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets. Self-priming and suitable for application over most existing coatings and St2. St3 prepared substrates
This coating is self-priming. May be applied over inorganic zinc primers and other tightly adhering coatings. A mist coat may be required to minimize bubbling over inorganic zinc primers. Do not apply over latex coatings.
Top Features & Benefits
- Excellent chemical resistance
- Surface tolerant characteristics
- Self-priming and primer/finish capabilities
- Very good abrasion resistance
- Also available in a low temperature (LT) cure version (2°C)
- VOC compliant to current AIM regulations
Preparation & Application
Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
Steel
Sa2½ with a 38-75 surface profile. St2, St3 and Sa1 are suitable preparation methods for mild environments.
Galvanized Steel
SSPC-SP1 and prime with specific Carboline primers as recommend by Carboline
Concrete
Concrete must be cured 28 days at 24C and 50% relative humidity or equivalent. Prepare surfaces in accordance with ASTM D4258 Surface Cleaning of Concrete and ASTM D4259 Abrading Concrete. Voids in concrete may require surfacing. Prime with Carboguard 1340.
Previously Painted Surfaces
Lightly sand or abrade to roughen surface and de-gloss the surface. Existing paint must attain a minimum 3B rating in accordance with ASTM D3359 “X-Scribe” adhesion test.
Mixing
Power mix separately, then combine and power mix, at 1:1 Ratio (A to B). DO NOT MIX PARTIAL KITS.
Thinning
Spray: Up to 12% w/ Thinner 2.
Brush or Roller: Up to 15% w/ Thinner 33.
Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.
Data sheet
- Manufacturer
- Carboline
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
Concrete
Galvanized Steel
St2-Prepared Surfaces
St3-Prepared Surfaces - Application Method
- Brush
Roller
Spray - Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Base Type
- Solvent-Based
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Carboline
- Components
- 1K
- Usages
- MIO
- Product Usage Type
- Mid Coat
- Product Range
- Carboguard
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Aluminium
- Colour Family
- Cream
- Colour Family
- Beige
- Dry to Recoat (@ 20-25°C)
- 4 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Carboline Carboguard 890 MIO is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT