- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Carboline CARBO-KIT Carbozinc 858 is a two-component, high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments.
- Designed for brush and roller application for touch up and maintenance
- Outstanding application properties
- Protects steel galvanically
- Cures at low temperatures down to 2°C
- Cured film is tough and abrasion resistant
- Widely used within petrochemical, offshore shipping and other heavy industries in severe environments with appropriate topcoat
- No induction time
- Prequalified in accordance with NORSOK M-501, Rev.6 System 1
This product is only available as PRICE ON APPLICATION - For more information and to place an order please contact us on 0113 2455450 or email [email protected].
Description
Carboline CARBO-KIT Carbozinc 858 is a two-component, high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments.
Click To Jump To Section:
- Features and Benefits
- Product Specification
- Drying Times
- Surface Preparation
- Application Methods
- Application Conditions
- Health and Safety
Features and Benefits
- Designed for brush and roller application for touch up and maintenance
- Outstanding application properties
- Protects steel galvanically
- Cures at low temperatures down to 2°C
- Cured film is tough and abrasion resistant
- Widely used within petrochemical, offshore shipping and other heavy industries in severe environments with appropriate topcoat
- No induction time
- Prequalified in accordance with NORSOK M-501, Rev.6 System 1
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Carboline CARBO-KIT Carbozinc 858 | ||||||
| Volume Solids: | 65 ± 2% | |||||
| Zinc content in dry film: 84 % | ||||||
| Theoretical Coverage Rate: | 13 m²/l at 50 µm | |||||
| 4,3 m²/l at 150 µm | ||||||
| Allow for loss in mixing and application. | ||||||
| Dry Film Thickness: | 50 - 150 microns (1.95 - 5.9 mils) per coat | |||||
| Wet Film Thickness: | 80 - 230 µm per coat. | |||||
| Dry Temperature Resistance: | Continuous: 150°C (302°F) | |||||
| Non-Continuous: 200°C (392°F) | ||||||
| Topcoats: | May be topcoated with epoxy, polyurethane or others as recommended by Rawlins on Tech - 0113 2455450 (option 2) or [email protected]. | |||||
| Limitations: | Not recommended for direct exposure to strong acids and alkalis. | |||||
| Shelf Life: | Part A: 9 months (24°C) | |||||
| Part B: 2 years (24°C) | ||||||
| Storage Temperature and Humidity: | 5° - 45°C | |||||
| 0 – 95% relative humidity | ||||||
Drying Times
| Curing Schedule | ||||||
|---|---|---|---|---|---|---|
| Surface Temp. | Dry to Handle or Recoat | Final Cure | ||||
| 2°C (36°F) | 8 Hours | 10 Days | ||||
| 10°C (50°F) | 5 Hours | 5 Days | ||||
| 24°C (75°F) | 2 Hours | 3 Days | ||||
| 32°C (90°F) | 1 Hour | 2 Days | ||||
Surface Preparation
General
- Surface must be clean and dry.
- Employ adequate methods to remove dirt, dust, oil, and all other contaminants that could interfere with adhesion of the coating.
Steel
- Surface preparation to be minimum St 3 (ISO 8501-1). Alternatively, ultra-high pressure water jetting to Nace No. 7 min. C Vis WJ-2. Max flash rust; C Vis WJ-2M.
Application Methods
| Product Information | |||||
|---|---|---|---|---|---|
| Mixing: | Power mix separately, then add part B to Part A and power mix well. | ||||
| Do not mix partial kits | |||||
| Thinning: | Normally not required. May be thinned up to 10 % with Carboline Thinner 2. | ||||
| Ratio: | 6:1 (A to B) by volume | ||||
| Pot Life: | 4 Hours at 23°C and less at higher temperatures. | ||||
| Brush: | Recommended using a medium bristle brush. Typical film thickness will be achieved in one coat. | ||||
| Roller: | Recommended using a short haired roller. Typical film thickness will be achieved in one coat. | ||||
Application Conditions
| Product Conditions | |||||
|---|---|---|---|---|---|
| Condition | Material | Surface | Ambient | Humidity | |
| Minimum | 4°C (39°F) | 2°C (36°F) | 2°C (36°F) | 0% | |
| Maximum | 30°C (86°F) | 50°C (122°F) | 45°C (113°F) | 95% | |
Health and Safety
Clean Up
- Use Thinner 2 or Acetone
- In case of spillage, absorb and dispose of in accordance with local applicable regulations.
Safety
- Read and follow all caution statements on this product data sheet and on the safety data sheet for this product.
- Employ normal workmanlike safety precautions.
- Hypersensitive persons should wear protective clothing, gloves and use protective cream on face, hands, and all exposed areas.
Ventilation
- When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured.
- The ventilation system should be capable of preventing the solvent vapor concentration from reaching the lower explosion limit for the solvents used.
Caution
- This product contains flammable solvents. Keep away from sparks and open flames.
- All electrical equipment and installations should be made and grounded in accordance with the applicable local regulations.
- In areas where explosion hazards exist, workmen should be required to use non-ferrous tools and wear conductive and non-sparking shoes.
- Refer to the product and safety data sheet in the attachments section above for further details.
Product Details
3680-478544
Data sheet
- Manufacturer
- Carboline
- For Use On
- Steel
- Application Method
- Brush, Roller
- Sheen
- Flat
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1.75L
- Coverage
- 13 m²/l at 50 µm - 4,3 m²/l at 150 µm
- Recommended Thinner/Cleaner
- Carboline Thinner 2
- Compatible Topcoats
- May be topcoated with epoxy, polyurethane or others as recommended by Rawlins
- Max. Application Temperature
- Material: 30°C (86°F) - Surface: 50°C (122°F) - Ambient: 45°C (113°F) - Humidity: 95%
- Min. Application Temperature
- Material: 4°C (39°F) - Surface: 2°C (36°F) - Ambient: 2°C (36°F) - Humidity: 0%
- Solids by Volume
- 65 ± 2% - Zinc content in dry film: 84 %
- Shelf Life (from date of manufacture)
- Part A: 9 months (24°C) - Part B: 2 years (24°C)
- Recommended Dry Film Thickness
- 50 - 150 microns (1.95 - 5.9 mils) per coat
- Recommended Wet Film Thickness
- 80 - 230 µm per coat
- UN Number
- UN3469
- Dry to Handle (at 10°C)
- 5 Hours
- Pot Life (at 10°C)
- 4 Hours at 23°C
- Dry to Recoat (at 10°C)
- 5 Hours
- Fully Cured (at 10°C)
- 5 Days
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Usages
- High Solids
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Zinc Rich /Cold Galvanising
- Usages
- Galvanic Protection
- Product Usage Type
- Primer
- Product Range
- Carbozinc
- Dry to Recoat (@ 20-25°C)
- 2 hours
- Zinc Content
- 0.84
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Carboline CARBO-KIT Carbozinc 858 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Carboline Thinner 2
Carboline Thinner 2 is a thinner for use in industrial coatings.
Price
£37.88
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery