- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Aluspray, a finishing coat that improves the aesthetic of Zinga in a handy and economical 500ml aerosol spray can. Ideal for spot treatment on small areas and touching up HDG, metallisation or previously treated Zinga surfaces.
- Efficient and solid
- Aluminium colour (~RAL 9006: comparable to hot-dip)
- Good resistance to mechanic shocks, abrasion and erosion
- Minimum -40°C, maximum +150°C temperature resistance (dry film)
- Can be applied on ferro-metals and (damaged) zinc surfaces
Aluspray is a finishing coat for Zinga in a handy 500ml aerosol spray can, ideal for spot-application on small areas and touching up HDG, metallisation or previously treated Zinga surfaces. Based on aluminium flakes, Aluspray can be applied either without primer on an old, non-corroded hot-dip galvanisation or metallisation layer or as topcoat on top of ZINGA for better aesthetics with an aluminium finish.
Features
- Convenient and economical 500ml spray aerosol can
- For spot application on small areas and touching up
- Aluminium colour (~RAL 9006: comparable to hot-dip)
- Good resistance to mechanic shocks, abrasion and erosion
- Efficient and solid
- Minimum -40°C, maximum +150°C temperature resistance (dry film)
Surface Preparation
Aluspray can be applied on ferro-metals and (damaged) zinc surfaces. For optimal performance, the metal should first be degreased, preferably by steam-cleaning. Alternatively, the surface can be degreased using solvent (e.g. Zingasolv), but never use white spirit.
For optimal performance, clean to SA 2,5 (ISO 8501:2007). For non-critical (small) areas, cleaning to St 3 is sufficient (using a steel brush).
Application
Aluspray must be shaken thoroughly before application for a minimum of 30 seconds after liberating the balls, repeating every time the can is left unused for some time.
Keep the spray between 10 and 20 cm away from the substrate and move in a continuous speed from left to right. Repeat with a spray application from top to bottom.
Always apply 2 layers when overcoating with a new layer of Aluspray; apply the second coat 1 hour after touch dry.
Clean equipment or spills with Zingasolv.
For more specific and detailed recommendations concerning application, please contact our technical team on 0113 2455450. For detailed information about the health and safety hazards and precautions for use, refer to the safety data sheet in the attachments tab above.
Drying Times
For 40 μm DFT at 20°C in a well-ventilated environment:
- Touch dry: 15 minutes
- Dry to handle: 1 hours
- Fully cured: 48 hours
Data sheet
- Manufacturer
- Zinga
- For Use On
- Ferrous Metals, Zinc
- Application Method
- Spray
- Sheen
- Satin
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 500ml
- UN Number
- UN1950
- Suitable For Use On
- Zinc
- Suitable For Use On
- Ferrous Metals
- Finish
- Satin
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Aluminium
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinga Aluspray is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT