What’s the coldest temperature this can be applied at?

This product can be applied in temperatures as low as -5C, with the use of Eagle Desmoplus , which is an additive to allow the membrane to be applied in low temperatures or in adverse weather conditions. Below 2C, this product won't cure without the addition of Eagle Desmoplus. If applying wet on wet, the minimum temperature is 2C and rising.

Does your product adhere to concrete that has fibre glass in it

Yes this product can be applied to glass fibre reinforced concrete assuming it is clean, dry, sound, prepared and primed with Eagle Primer PU1000 .

Can Desmopol be used on an existing "Roofkrete System 4" flat roof and what would be the recommended preparation and priming process. Thanks

Unfortunately we are not familiar with Roofkrete System 4, please can we ask for more information on the make up of the system, pictures of the areas in question, size of the roof and any other relevant information. Please send this to technical@rawlinspaints.com.

Can this product be used on an old roof previously coated with Bullet Roof Mono?

Assuming the old roof is clean, dry, sound and prepared as detailed in the technical data sheet this product would most likely adhere to the previously applied Bullet Roof Mono. We would recommend to test for compatibility and adhesion on a small area prior to full application. The more simple option to avoid a compatibility option would be to use Bullet Roof Mono instead.

I have just laid a concrete floor with a damp proof membrane in a basement utility room. Is Desmopol ok to coat this floor and do I need to seal it with your primer? - thanks - Gordon.

No, while this product can be applied to a concrete substrate as part of a system it is not usually used for a floor. Once the concrete floor has been left to dry out, approximately 4 weeks per inch of slab depth, the concrete is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Rust-Oleum 7200 Floorcoat PU . This is available in many RAL, NCS or BS colours in a satin or gloss finish.

When measuring a roof how many litres per meter do I allow for

The coverage rate for this product is 1.5kg – 2kg per m². This product is normally used as part of a system in either a two coat reinforced system or a 1 coat un-reinforced system. Both of these are normally over painted with Eagle Tecnotop 2C .

Can Eagle Desmopol Liquid Polyurethane Membrane be used over a product that has been applied to fill a couple leaks already, on a balcony that is walked on, that contained a hybrid polymer, N-(3-(trimethoxysilyl)propyl)ethylenediamine called Stixall Extreme Power. If not is there another product in your range that you can recommend?

Stixall Extreme Power, does state that they are over paintable, but we would recommend you test for compatibiltiy and adhesion prior to full application. Desmopol can be used on balconies assuming the substrate is compatible and a complete system is used including Eagle Tecnotop 2C .

I have felt on top of my brick shed can I but this straight on the top of felt yes or no I just want to waterproof it

Assuming the felt roof is clean, dry, sound and prepared as detailed in the Technical Data sheet this can be applied to a felt roof. We would recommend looking at the Application Guide for Bitumen Felt, this can be found in the datasheets tab on the product page. Eagle Desmopol Liquid Polyurethane Membrane

Is the hardener included in the order for a tin of Technipol? I want to coat an old Zinc flat roof, do I need any fibreglass matt?

Eagle Desmopol Liquid Polyurethane Membrane is a single pack product so it doesn't have a hardener. There are some additives to accompany if required such as Eagle Desmoplus and Eagle Desmothix . Eagle Tecnoband 225g Matting would be recommended for your whole roof area.

Eagle Desmopol Liquid Polyurethane Membrane | Flat Roof Paints

Eagle Desmopol Liquid Polyurethane Membrane

Reference DDG

Brand Eagle

Search ID EAG3874

Waterproofs flat roofs, walkways and balconies, protecting against corrosion.

15-25 year guarantee - please see 'Guarantee Information' below for details
Holds BBA/ETA certification for life expectancy in excess of 25 years
Easy and quick application. No reinforcement required
Can be applied even with zero pitch
No seams or overlaps
600% Elongation: High resistance to abrasion and high elasticity
See the description below for more surfaces and substrates that can be treated.

Colour

Dark Grey

Size

£70.67(incl. VAT)

£58.89(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

9 questions about the product

Description

Use Eagle Desmopol Liquid Polyurethane Membrane to waterproof flat roofs, walkways and balconies. The high elastomeric waterproofing liquid membrane is the perfect solution for waterproofing complicated roofs, such as those with detail work.

Desmopol Liquid Polyurethane Membrane can be applied wet-on-wet fully reinforced with excellent adhesion to most substrates without the use of primer, including bitumen, GRP, torch-on felts, OSB, single ply, over PIR boards, asphalt or on warm roofs, etc.

15-25yr Guarantee - please see 'Guarantee Information' below for details.

Above are two product videos featuring Desmopol Liquid Polyurethane Membrane:

Video 1:

This video shows a standard 2 coat wet on wet application of Desmopol with Tecnoband Matting
It outlines the use of Eagle Tecnotop as the finishing coat and discusses the uses of Desmopol Sealant and Desmothix polymeric thickener during application

Video 2:

This video shows a 1 coat un-reinforced (without Tecnoband Matting) application of accelerated Desmopol by the inclusion of Desmoplus Additive
It outlines the use of Eagle Tecnotop and discusses the anti-slip options available using Anti-Slip Slate Grit and Tecnoplastic Rubber Granules for balconies and walkways
Desmothix polymeric thickener is discussed for use during the application of Desmopol Liquid Polyurethane Membrane on pitched or vertical surfaces

Quick Links - Click To Jump To Section:

Features & Benefits
Applications
Application Guides
Guarantee Information

Features & Benefits

Completely waterproof
15-25yr Guarantee - please see 'Guarantee Information' below for details
Holds BBA/ETA certification for life expectancy in excess of 25 years
Protects against corrosion, rust and wear
Easy and quick application. No reinforcement required
Can be applied even with zero pitch
No seams or overlaps
600% Elongation: High resistance to abrasion and high elasticity

Applications

Desmopol Liquid Polyurethane Membrane can be used on a variety of surfaces and substrates - please refer to the relevant data sheets for information on application methods and recommendations or give our technical team a call on 0113 2455450.

Please see the Application Guides section below for specific application information

Wet-on-Wet (Fully Reinforced):

Single ply Overlay
GRP
Plywood/OSB
Warm roof over PIR
Inverted roof
Green roof
Torch on felt overlay
Asphalt
Paving slabs
New build waterproofing

Recommended Primers - For concrete, EPDM and TPO single ply use PU1000 primer.

Important - Silicone-based mastics should not be used as they are incompatible.

Accelerated: Only recommended for trained contractors; contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] before purchasing or using Desmopol in an accelerated application.

Others:

Asbestos
Metals
Swimming pools
Potable water tanks
Transparent-Desmopol T
Heavy Traffic Tecnotop 3000

Application Guides

Below are specific application guides for Eagle Desmopol (Click to download):

Guarantee Information

15 Year Guarantee - Minimum 1.5kg/m² Eagle Desmopol Liquid Polyurethane Membrane fully reinforced with Eagle Tecnoband 225g Matting or applied at minimum 1.5kg/m² using Eagle Desmoplus and using Eagle Tecnoband 225g Matting on all joints and detail work. Finished with Eagle Tecnotop 2C at 150-200 g/m² once the Desmopol has cured fully (minimum 3 hours with Desmoplus, 24 hours without)
20 Year Guarantee – As above but the contractor must be trained on the product (contact us for details, costs associated for training)
25 Year Guarantee - Minimum 2kg/m² Eagle Desmopol Liquid Polyurethane Membrane made up of the following:
- Initial application 1.5kg/m² Desmopol fully reinforced with Eagle Tecnoband 225g Matting or applied at minimum 1.5kg/m² using Eagle Desmoplus and using Eagle Tecnoband 225g Matting on all joints and detail work
- Additional coat of Desmopol (without matting, Desmoplus optional) 0.5kg/m² after the initial application has cured (minimum 3 hours with Desmoplus, 24 hours without)
- Final coat of Eagle Tecnotop 2C to finish at 150-200 g/m²
- Contractor must be trained on the product
In all cases the customer must register the job to get the guarantee using the ‘Guarantee Requisition’ form available to download HERE
Once complete, the form should be sent to [email protected]

Product Details

Reference 3874-902573

Data sheet

Manufacturer: Eagle
For Use On: Concrete, Metal, Asbestos, Asphalt, GRP
Application Method: Roller
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Single
Pack Size: 6KG, 25KG
Application: Roller
Touch Dry (at 20°C): 6-8 Hours
Dry to Recoat (at 20°C): Immediately or after 24 Hours
Fully Cured (at 20°C): 24 Hours
Coverage: 1.5kg – 2kg per m²
UN Number: UN1139
Suitable For Use On: Wood
Suitable For Use On: GRP Glass-Reinforced Plastic
Suitable For Use On: Asphalt
Suitable For Use On: Mineral Felt
Suitable For Use On: Bituminous Surfaces
Suitable For Use On: Roofs
Suitable For Use On: Polyurethane Foam
Suitable For Use On: Butyl Sheets
Suitable For Use On: Polyurethane Plates
Suitable For Use On: Metal
Suitable For Use On: Concrete
Application Method: Roller
Product Usage Type: Membrane
Product Range: Desmopol
Colour Family: Grey
Categorised As: Roof Paints > Low Temperature Roof Paints
Seasonal: Cold Weather
Roof Type: Flat & Pitched

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Desmopol Leaflet

Download

Declaration Of Performance

Download

BBA Certificate

Download

Application Guide: Fully Reinforced

Download

Application Guide: Accelerated

Download

Guarantee Requisition Form

Download

Broof T4 Certificate

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Jamie on 2024-01-10 22:56:57	Question: What’s the coldest temperature this can be applied at?
	Answer from Rawlins’ Technical Team: This product can be applied in temperatures as low as -5C, with the use of Eagle Desmoplus, which is an additive to allow the membrane to be applied in low temperatures or in adverse weather conditions. Below 2C, this product won't cure without the addition of Eagle Desmoplus. If applying wet on wet, the minimum temperature is 2C and rising.

Dudley afordham on 2023-09-15 22:00:53	Question: Does your product adhere to concrete that has fibre glass in it
	Answer from Rawlins’ Technical Team: Yes this product can be applied to glass fibre reinforced concrete assuming it is clean, dry, sound, prepared and primed with Eagle Primer PU1000.

Tim Newton on 2023-03-16 15:09:11	Question: Can Desmopol be used on an existing "Roofkrete System 4" flat roof and what would be the recommended preparation and priming process. Thanks
	Answer from Rawlins’ Technical Team: Unfortunately we are not familiar with Roofkrete System 4, please can we ask for more information on the make up of the system, pictures of the areas in question, size of the roof and any other relevant information. Please send this to [email protected].

Eric on 2023-02-01 10:44:47	Question: Can this product be used on an old roof previously coated with Bullet Roof Mono?
	Answer from Rawlins’ Technical Team: Assuming the old roof is clean, dry, sound and prepared as detailed in the technical data sheet this product would most likely adhere to the previously applied Bullet Roof Mono. We would recommend to test for compatibility and adhesion on a small area prior to full application. The more simple option to avoid a compatibility option would be to use Bullet Roof Mono instead.

Gordon Millington on 2022-11-13 16:45:19	Question: I have just laid a concrete floor with a damp proof membrane in a basement utility room. Is Desmopol ok to coat this floor and do I need to seal it with your primer? - thanks - Gordon.
	Answer from Rawlins’ Technical Team: No, while this product can be applied to a concrete substrate as part of a system it is not usually used for a floor. Once the concrete floor has been left to dry out, approximately 4 weeks per inch of slab depth, the concrete is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Rust-Oleum 7200 Floorcoat PU. This is available in many RAL, NCS or BS colours in a satin or gloss finish.

Mr brown on 2022-05-19 11:23:53	Question: When measuring a roof how many litres per meter do I allow for
	Answer from Rawlins’ Technical Team: The coverage rate for this product is 1.5kg – 2kg per m². This product is normally used as part of a system in either a two coat reinforced system or a 1 coat un-reinforced system. Both of these are normally over painted with Eagle Tecnotop 2C.

Mr Heffer on 2021-09-22 14:52:19	Question: Can Eagle Desmopol Liquid Polyurethane Membrane be used over a product that has been applied to fill a couple leaks already, on a balcony that is walked on, that contained a hybrid polymer, N-(3-(trimethoxysilyl)propyl)ethylenediamine called Stixall Extreme Power. If not is there another product in your range that you can recommend?
	Answer from Rawlins’ Technical Team: Stixall Extreme Power, does state that they are over paintable, but we would recommend you test for compatibiltiy and adhesion prior to full application. Desmopol can be used on balconies assuming the substrate is compatible and a complete system is used including Eagle Tecnotop 2C.

Mr Harper on 2021-04-07 21:12:32	Question: I have felt on top of my brick shed can I but this straight on the top of felt yes or no I just want to waterproof it
	Answer from Rawlins’ Technical Team: Assuming the felt roof is clean, dry, sound and prepared as detailed in the Technical Data sheet this can be applied to a felt roof. We would recommend looking at the Application Guide for Bitumen Felt, this can be found in the datasheets tab on the product page. Eagle Desmopol Liquid Polyurethane Membrane

Martin Grierson on 2019-12-19 12:02:52	Question: Is the hardener included in the order for a tin of Technipol? I want to coat an old Zinc flat roof, do I need any fibreglass matt?
	Answer from Rawlins’ Technical Team: Eagle Desmopol Liquid Polyurethane Membrane is a single pack product so it doesn't have a hardener. There are some additives to accompany if required such as Eagle Desmoplus and Eagle Desmothix. Eagle Tecnoband 225g Matting would be recommended for your whole roof area.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Eagle Desmopol Liquid Polyurethane Membrane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Eagle Tecnoband 225g Matting

Use Eagle Tecnoband 225g Matting in combination with Desmopol Liquid Polyurethane Membrane for wet-on-wet applications. The bound fibre mat is available in rolls from the drop-down menu. More Information Delivery Info

£44.40 (incl. VAT)

Shop now

In Stock and Available for Delivery

Eagle Tecnotop 2C

2-component polyurethane resin for protection of high-traffic flooring that forms a hard and strong continuous film with excellent adhesion and mechanical properties, resisting abrasion and stress, algae and mould growth, weathering, extreme temperatures, and UV radiation. Gloss finish Ideal for high-traffic areas in industrial and...

£150.40 (incl. VAT)

Shop now

In Stock and Available for Delivery

Eagle Desmoplus

An additive to be mixed with Desmopol Liquid Polyurethane Membrane to improve application in one layer, eliminating air bubbles, increasing tensile strength, speeding up drying times, and allowing the membrane to be applied in low temperatures or adverse weather. More Information Delivery Info

£23.56 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Eagle Desmopol Liquid Polyurethane Membrane

Eagle Desmopol Liquid Polyurethane Membrane

Quick Links - Click To Jump To Section:

Features & Benefits

Applications

Application Guides

Guarantee Information

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Eagle Tecnoband 225g Matting

Eagle Tecnotop 2C

Eagle Desmoplus