- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
PPG Prep 88 (also known as Duraprep) is a waterborne alkaline cleaner that is ideal for cleaning soiled and chalked surfaces. Free from solvents, phosphates, halogens and petroleum distillates.
- Biodegrable
- Dramatically improves aged overcoatability
- Freezing point: 25°F (-4°C)
- Boiling Point: 212°F (100°C)
PPG Prep 88 (also known as Duraprep) is a waterborne alkaline cleaner that is ideal for cleaning soiled and chalked surfaces. It doesn't contain solvents, phosphates, halogens, or petroleum distillates and has the added bonus of being biodegradable
Top Features & Benefits
- Emulsifies oils
- Dramatically improves aged overcoatability, saving on costs for secondary surface preparation
- Freezing point: 25°F (-4°C)
- Boiling Point: 212°F (100°C)
- Flash Point: none pH 11.5 - 13.0
- Coverage: 1 gallon (diluted 2 parts water to 1 part concentrate) will treat between 1,000 - 1,500 square feet, depending on the configuration of the substrate and application losses
- Finish: Slight haze
Product Data
Basic data at 20°C (68°F)
Data for Mixed Product | |
---|---|
Number of Components | One |
VOC (Supplied) | max. 0.0 lb/US gal (approx. 0 g/l) |
Shelf life | At least 60 months when stored cool and dry |
Recommended Substrate Conditions and Temperatures
- Ambient temperature should be between 40°F (5°C) and 100°F (37°C)
- Material temperature should be between 40°F (5°C) and 90°F (32°C)
- Surface temperature should be between 40°F (50°C) and 100°F (37°C) (pre-cool the surface by water rinsing prior to application of Prep 88 if required)
Instructions for Use
- Shield any surfaces not intended to be treated.
- Wear appropriate eye protection and avoid contact with skin.
- Pre-clean any heavy residues by power washing.
- If steel temperatures exceed 100°F (37°C), pre-cool the steel by water washing to prevent Prep 88 from drying on the surface prematurely. Do not apply under freezing conditions.
- Mix Prep 88 with fresh, clean water according to the instructions below:
- Light Cleaning (no visable contaminants): 3 parts water to 1 part concentrate
- General Cleaning and restoring overcoatability: 2 parts water to 1 part concentrate
- Heavy soiling, greasy residues: 100% concentrate
- Prep 88 can be applied with a low pressure sprayer (garden sprayer, etc.), brush, or roller.
- Apply generously to the surface, ensuring all areas are thoroughly wetted. Caution should be used on complex structures to ensure Prep 88 can be applied to all areas and subsequently rinsed.
- Scrub with a nylon brush as needed for cleaning heavy residues.
- Allow Prep 88 to dwell on the surface for the following times based on the surface temperatures:
- 40°F: 20 - 30 minutes
- 70°F: 10 - 20 minutes
- 90°F: 10 - 15 minutes
- 100°F: 5 - 10 minutes
- Do not allow Prep 88 to dry on the surface. If product does dry on the surface, a second application of Prep 88 will be required to dissolve the dried residue.
- Power wash the surface to thoroughly rinse all traces of Prep 88 from the surface. Ensure the surface pH has been neutralized (7.5 maximum). Failing to remove Prep 88 from the surface will be detrimental to the performance of successive coats.
- Allow the surface to dry thoroughly prior to overcoating.
- Protect surfaces from contamination prior to overcoating. Apply coatings within the following timeframe of Prep 88 application:
- 40°F - 50°F: 48 hours
- 51°F - 70°F: 36 hours
- 71°F - 90°F: 32 hours
- 90°F: 24 hours
Product specific overcoatability guide when Prep 88 is used
- AGED ACRYLIC POLYURETHANE: atmospheric, ambient temperature service / overcoated by epoxy, PSX or polyurethane --> overcoatable after treatment
- AGED EPOXY, FREELY CHALKING: atmospheric, ambient temperature / overcoated by epoxy, PSX, or polyurethane --> overcoatable after treatment
- AMERCOAT 370, 385, 235, 240, 399, AMERLOCK 2/400, PITTGUARD EPOXY: atmospheric, ambient temperatures / overcoated by epoxy --> overcoatable after treatment
- AMERCOAT 370, 385, 235, 240, 399, AMERLOCK 2/400, PITTGUARD EPOXY: atmospheric, ambient temperatures / overcoated by polyurethane --> overcoatable after treatment for up to 3 months from initial application
- PPG EPOXIES: ambient water immersion / overcoated by PPG epoxies --> extend maximum overcoat window by 50%
- PPG EPOXIES: severe duty* / overcoated by PPG epoxies --> extend maximum overcoat window by 20%
Notes:
*Severe duty includes heavy impact / abrasion, elevated temperatures, polluted (waste) water immersion (not recommended for chemical tank lining service).
**Other product specific recommendations may be available based on previous testing. Contact Rawlins Paints' Technical Service for details or expectations.
Data sheet
- Manufacturer
- PPG
- Parts
- One
- Base Type
- -
- Solvent
- Water-based
- Mixing Ratio
- 2:1
- Suitable Substrates
- Steel and chalked surfaces
- Key Features
- Excellent cleaning of soiled and chalked surfaces, biodegradable, emulsifies oils
- Application
- -
- Touch Dry (at 20°C)
- -
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- -
- Fully Cured (at 20°C)
- -
- Pot Life (at 20°C)
- -
- Coverage
- 1 gallon (diluted 2 parts water to 1 part concentrate) will treat between 1,000 - 1,500 square feet, depending on the configuration of the substrate and application losses
- Recommended Thinner/Cleaner
- -
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- -
- Max. Application Temperature
- 37°C (100°F)
- Min. Application Temperature
- 5°C (40°F)
- Density
- -
- Solids by Volume
- -
- Heat Resistance (up-to)
- -
- VOC
- Max. 0.0 lb/US gal (approx. 0 g/l)
- Shelf Life (Once Opened)
- At least 60 months when stored cool and dry
- Product Usage Type
- Cleaner
- Product Range
- Prep 88
- Colour Family
- Clear
Alan Haworth on 2024-06-27 17:10:22 | Question:
How long can steel be left without primmer being applied after washing with PREP 88 ? |
Answer from Rawlins’ Technical Team:
The product will protect the surfaces from contamination for 24hours at 90°F. At lower temperatures this will be longer as stated in the technical data sheet. Please note the substrate must be power washed to remove all traces of the product and allowed to dry prior to application of a coating. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Prep 88 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT