- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Modified acrylic finish coat for above-water areas, in 2,600+ gloss colours.
- Featuring good gloss and colour retention, resistance to water and splash of mild chemicals.
- This fast-drying coat can be applied at temperatures down to –10°C.
- Dries in as little as 30 minutes (@ 20°C).
- Apply by spray, brush or roller.
Product customisation
Don't forget to save your customization to be able to add to cartPPG Sigma Vikote 56 is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F).
Features & Benefits
- Dries in as little as 30 minutes (@ 20°C)
- Apply by spray, brush or roller
- Gloss finish
- 2000+ colour options including RAL, NCS and British Standard shades
Recommended Substrate Conditions and Temperatures
Substrate Conditions
Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination. Substrate temperature during application should be at least 3°C (5°F) above dew point
Instructions for Use
- Stir well before use
- The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing. Please refer to information sheets 1433 and 1434.
Air Spray
Recommended thinner: PPG Thinner 21-06
Volume of thinner: 5 - 10%, depending on required thickness and application conditions
Nozzle orifice: 1.8 - 2.0 mm (approx. 0.070 – 0.079 in)
Nozzle pressure: 0.2 - 0.3 MPa (approx. 2 - 3 bar; 29 - 44 p.s.i.)
Airless Spray
Recommended thinner: PPG Thinner 21-06
Volume of thinner: 0 - 5%, depending on required thickness and application conditions.
Nozzle orifice: Approx. 0.28 - 0.33 mm (0.011 – 0.013 in)
Nozzle pressure: 12.0 - 15.0 MPa (approx. 120 - 150 bar; 1741 - 2176 p.s.i.)
Brush/Roller
Recommended thinner: PPG Thinner 21-06
Volume of thinner: 0 – 3%
Cleaning Solvent
PPG Thinner 21-06
Safety Precautions
For paint and recommended thinners see information sheets 1430, 1431 and relevant Material Safety Data Sheets. This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes.
Product Data
Data for Product at 20°C (68°F) | |||||
---|---|---|---|---|---|
Number of components | One | ||||
Mass density | 1.1 kg/l (9.2 lb/US gal) | ||||
Volume solids | 35 ± 2% | ||||
VOC (Supplied) | Directive 1999/13/EC, SED: max. 538.0 g/kg max. 569.0 g/l (approx. 4.7 lb/US gal) | ||||
Recommended dry film thickness | 1.1 kg/l (9.2 lb/US gal) | ||||
Theoretical spreading rate | 10.0 m²/l for 35 µm (401 ft²/US gal for 1.4 mils) | ||||
Dry to touch | 30 minutes | ||||
Overcoating interval | Minimum: 4 hours. Maximum: Unlimited | ||||
Shelf life | At least 24 months when stored cool and dry |
Overcoating interval for DFT up to 75 µm (3 mils) | |||
---|---|---|---|
Overcoating with... | Interval | 5°C (51°F) | 20°C (68°F) |
Itself | Minimum Maximum |
8 hours Unlimited |
4 hours Unlimited |
Curing time for up to 35 µm (1.4 mils) | |
---|---|
Substrate Temp. | Dry to touch |
5°C (41°F) | 1 hours |
20°C (68°F) | 30 minutes |
References
- Safety Indicators (information sheet 1430)
- Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)
- Safe Working in Confined Spaces (information sheet 1433)
- Directives for Ventilation Practice (information sheet 1434)
Data sheet
- Manufacturer
- PPG
- For Use By
- Professional Use
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Parts
- One
- Base Type
- Modified acrylic
- Solvent
- Solvent-free
- Mixing Ratio
- -
- Suitable Substrates
- Steel
- Key Features
- Good gloss and colour retention, resistance to water and splash of mild chemicals, dries in as little as 30 minutes
- Application
- Spray, Brush, Roller
- Touch Dry (at 20°C)
- 30 minutes
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- -
- Pot Life (at 20°C)
- -
- Coverage
- 10.0 m²/l for 35 µm (401 ft²/US gal for 1.4 mils)
- Recommended Thinner/Cleaner
- Thinner 21-06
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Itself
- Max. Application Temperature
- -
- Min. Application Temperature
- Substrate at least 3°C (5°F) above dew point
- Density
- 1.1 kg/l (9.2 lb/US gal)
- Solids by Volume
- 35 ± 2%
- Heat Resistance (up-to)
- -
- VOC
- Directive 1999/13/EC, SED: max. 538.0 g/kg max. 569.0 g/l (approx. 4.7 lb/US gal)
- Shelf Life (Once Opened)
- 24 months
- UN Number
- UN1263
- Base Type
- Modified Acrylic
- Suitable For Use On
- Chlorinated Rubber Coatings
- Suitable For Use On
- Vinyl Coatings
- Suitable For Use On
- Acrylic Coatings
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Sigma Vikote
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Categorised As
- Marine Paints > Low Temperature Marine Topcoats
- Seasonal
- Cold Weather
Questions
Question about the product
Ian Rattray on 2022-02-25 17:39:31 | Question:
Hi, is this coatings compatible with Hi-Dur zinc phosphate primer? |
Answer from Rawlins’ Technical Team:
Assuming the Hi-Dur zinc phosphate primer is an alkyd yes. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Sigma Vikote 56 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
PPG Thinner 21-06
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...