Heskins PermaStripe rolls form part of a durable line marking system (used with PermaStripe Shapes) for warehouse and factory floors, creating clearly defined and highly-visible routes for employees to perform duties and guests to pass through work areas safely and effectively. As a great alternative to painted lines or resin, PermaStripe is quick and easy to install. Self-adhesive, it sticks down to a clean and dry surface - no detailed preparation beyond cleaning and drying the surface is required and, once application is done, the area is ready immediately. Much less downtime for businesses!

The system has been used to great effect in warehouses with continuous production that cannot afford the time to mark off and exclude areas for drying, or that work with products that could be tainted or contaiminated by solvents and smells from paints and resins. PermaStripe allows much quicker installation, working around the business rather than interupting, and allows areas to be used immediately after application.

The strength and durability of PermaStripe has seen it being used in aircraft hangars with heavy machinery, and logistics centres with lots of foot and vehicle traffic, without the need for replacement. Removal is possible and due to the thickness and extreme strength of PermaStripe, it will not snap when removed. This allows for easy 5S Visual Management changes in the workplace, unlike resin or painted lines.

PermaStripe is available in 2 finishes; Standard has an embossed, anti-slip surface, whilst Smooth has no anti-slip surface and is designed for easier cleaning, leaving no areas for bacteria to harbour, for particular use in businesses with strict hygiene standards.

Both Standard and Smooth PermaStripe fit perfectly into Heskins' line marking tape range; the colours are the same, the angles are the same, all designed to create the perfect warehouse or factory line marking system, marking out aisles, bays, escape routes, etc.

Also available: PermaStripe Shapes

• Arrows
• Boot and foot outlines
• Letters and digits
• Corners, end-caps and T-junctions for PermaStripe rolls

See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc, including the PermaStripe Line Marking Applicator.

PermaStripe & PermaRoute; What’s the Difference?

Both products are designed to withstand testing warehouse and industrial environments, with subtle differences between them.

PermaStripe

A solid, homogenous piece of virgin plastic, PermaStripe is 1mm thick and extremely tough. The edges are feathered (sloped/curved) so that the material isn't a trip hazard, and the surface can be finished completely smooth for easier cleaning, or with a mild, non-slip emboss.

The solid homogenous construction ensures colours will not fade or be scratched off, or removed by harsh solvents such as MEK, toluene, etc. The thick plastic is hard to remove due to its strong adhesion, but removal is possible should line marking need to be altered.

PermaRoute

Perfectly flat, PermaRoute can be produced in much wider widths to create fully coloured walkways if needed, and the flat structure helps durability should vehciles need to turn on the material.

Made in 3 parts, the printed design is fully protected by a laminate with a mild non-slip emboss, with strong adhesive underneath. This construction allows printed logos and designs to be used.

Ordering References

PermaStripe Standard colours:

• H6901N Black (RAL 9004)
• H6901B Blue (RAL 5012)
• H6901V Green (RAL 6018)
• H6901O Orange (RAL 2009)
• H6901R Red (RAL 3018)
• H6901Y Yellow (RAL 1018)
• H6901W White (RAL 9003)
• H6901F Fluorescent Yellow (RAL 1016)
• H6901A Hazard Red/White
• H6901D Hazard Black/Yellow
• H6901E Hazard Black/White

PermaStripe Smooth colours:

• H6906N Black (RAL 9004)
• H6906B Blue (RAL 5012)
• H6906V Green (RAL 6018)
• H6906R Red (RAL 3018)
• H6906O Orange (RAL 2008)
• H6906Y Yellow (RAL 1018)
• H6906W White (RAL 9003)
• H6906A Hazard Red/White
• H6906D Hazard Black/Yellow

Features & Benefits

• Line marking rolls for warehouses and factories
• Use in 5S Visual Management systems
• A great alternative to resin or painted lines
• Self-adhesive - quicker to install
• Apply efficiently with the PermaStripe Line Marking Applicator
• Areas ready to use immediately after application - minimal downtime
• Can be removed to make adjustments, without breaking
• Available in solid colours or hazard designs
• Use with PermaStripe Shapes
• Create lines around corners
• Use T-junctions to combine lines
• Arrows, markers, letters & digits to convey information

Product Data

The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test, England.

Coefficient of Friction

The above tests were conducted in accordance with Pendulum, the tests were conducted at a recognised independent friction testing laboratory, and copy certificates are available on request.

Photoluminescent PermaStripe

• Test method: see further details below
• Test meter: Minolta LS100
• Lab environmental conditions: 23+2ºC, 50+10%RH

Test method

1. ASTM E2072(2004) ASTM E2073(2007)
2. Left in a dark room for 3 hours
3. Light source added, colour temperature 4000 to 4500K for 120 minutes, providing a luminance of 21.6 lux on the sample surface
4. Luminance measured at intervals of 10, 60 and 90 minutes