PermaRoute Shapes create a complete line marking solution for warehouse and factory floors with PermaRoute Rolls. PermaRoute improves workflow, safety and productivity with clearly marked bays and walkways, helping to achieve 5S Visual Management optimisation.

The PermaRoute system has been used to great effect in warehouses with continuous production that cannot afford the time to mark off and exclude areas for drying, or that work with products that could be tainted or contaiminated by solvents and smells from paints and resins. PermaRoute allows much quicker installation, working around the business rather than interupting, and allows areas to be used immediately after application.

It has been used to great effect in supermarket distribution centres, clearly marking bays for incoming and outgoing goods, and created routes for car assembly lines. Using PermaRoute at airports helps guide passengers to the correct check-in/security gate, using shapes such as arrows, letter and numbers, with highly visible colours that are easy to navigate, and a durable material that will last from constant foot traffic. Feet and boot shapes help people position themselves correctly through security gates; rotary scanners requiring a certain position for people to be in, and a visual guide will help make the process as quick as possible, and increasing passenger flow.

Removal is possible and due to the thickness and extreme strength of PermaRoute, it will not snap when removed. This allows for easy 5S Visual Management changes in the workplace, unlike resin or painted lines.

PermaRoute is available in many different shapes, including the full alphabet and digits, resulting in neat joins for a more aesthetically-pleasing line marking system. The shapes work well in conjunction with:

• PermaRoute Rolls
• Printed ESD PermaRoute
• Warehouse Marker Signs

See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.

Features & Benefits

• Part of a complete floor marking system, PermaRoute
• Combine with PermaRoute Rolls to create corners, junctions, etc
• Hazard designs also available
• Ideal for industrial environments:
• Warehouses
• Factories
• Workshops
• Assembly areas
• Durable, with a top laminated surface that won't scratch off
• Easy to apply, with little to no downtime
• Solvent-free - no fumes, ideal for areas with strict hygiene standards
• EN13501 certified – Tested for materials resistance to fire
• Chemical resistant to the following reagents:
• Petrol
• 25% lactic acid
• Diesel
• 10% hydrochloric acid
• 10% nitric acid
• 25% sulphuric acid
• See further below for test information

PermaStripe & PermaRoute; What’s the Difference?

Both products are designed to withstand testing warehouse and industrial environments, with subtle differences between them.

PermaStripe

A solid, homogenous piece of virgin plastic, PermaStripe is 1mm thick and extremely tough. The edges are feathered (sloped/curved) so that the material isn't a trip hazard, and the surface can be finished completely smooth for easier cleaning, or with a mild, non-slip emboss.

The solid homogenous construction ensures colours will not fade or be scratched off, or removed by harsh solvents such as MEK, toluene, etc. The thick plastic is hard to remove due to its strong adhesion, but removal is possible should line marking need to be altered.

PermaRoute

Perfectly flat, PermaRoute can be produced in much wider widths to create fully coloured walkways if needed, and the flat structure helps durability should vehciles need to turn on the material.

Made in 3 parts, the printed design is fully protected by a laminate with a mild non-slip emboss, with strong adhesive underneath. This construction allows printed logos and designs to be used.

Ordering References

More shapes, sizes, cuts and colours, etc, can be made to order - contact our sales team on 0113 2455450 or by email to discuss your requirements.

Colours available:

• Black (RAL 9004)
• Blue (RAL 5012)
• Green (RAL 6018)
• Orange (RAL 2009)
• Red (RAL 3020)
• Yellow (RAL 1021)
• Fluorescent Yellow (RAL 1016)
• White (RAL 9003)
• Dark Blue (RAL 5002)
• Hazard Black/Yellow
• Hazard Red/White
• Hazard Green/White
• Hazard Black/White
• Hazard Black/Orange

Shapes

• L - TL528 - 200mm x 200mm
• T - TL589 - 300mm x 200mm
• X - TL529 - 300mm x 300mm
• Dot - TL6 - 50mm diameter
• Dot - TL593 - 90mm diameter
• Walking Figure - TL531 - 328mm x 500mm
• Forklift - TL532 - 543mm x 500mm
• Arrow (Left or Right) - TL1119 - 300mm x 230mm

Joins

• 90° Corner
• TL759 - 90mm x 90mm (To join 50mm wide rolls)
• TL1246 - 135mm x 135mm (To join 75mm wide rolls)
• TL469 - 180mm x 180mm (To join 100mm wide rolls)
• 45° Corner
• TL707 - 85mm x 70mm (For 50mm rolls)
• TL708 - 125mm x 115mm (For 75mm rolls)
• TL709 - 170mm x 140mm (For 100mm rolls)
• T Junction
• TL617 - 146mm x 100mm (For 50mm rolls)
• TL618 - 220mm x 150mm (For 75mm rolls)
• TL619 - 290mm x 200mm (For 100mm rolls)
• Bridge
• TL620 - 140mm x 70mm (For 50mm rolls)
• TL621 - 210mm x 105mm (For 75mm rolls)
• TL622 - 280mm x 140mm (For 100mm rolls)
• End Cap
• TL614 - 70mm x 35mm (For 50mm rolls)
• TL615 - 105mm x 52mm (For 75mm rolls)
• TL616 - 140mm x 70mm (For 100mm rolls)

Floor & Pallet Markers

• L-Shape - TL1132 - 100mm x 100mm​
• T-Shape - TL1133 - 100mm x 150mm
• X-Shape - TL1131 - 150mm x 150mm
• Disc - TL131 - 100mm
• Arrow - TL1138 - 100mm x 200mm
• Line Block - TL1134 - 100mm x 200mm

Arrows

• Arrow - 90mm - TL527
• Arrow - Small - TL141 - 100mm x 65mm
• Arrow - Large - TL211 - 300mm x 230mm
• Arrow - Extra Large - TL970 - 1000mm x 565mm

Feet

Please note, price is per foot-shape. For a pair, add 2 items to your basket.

• Feet - TL99 - 57mm x 104mm
• Feet - TL100 - 120mm x 210mm
• Feet - TL37 - 280mm x 105mm
• Boot - TL29 - 240mm x 90mm
• Boot - TL242 - 300mm x 120mm

Letters & Digits

• A-Z, 0-9 - 95mm
• A-Z, 0-9 - 180mm

Zebra Crossing

Black and white sections - other colours and sizes available on request, including rolls. Please add as many black and white sections to the basket as you require, ie, 3 black and 3 white. Prices as per section.

• Zebra Crossing - 300mm x 1m

The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test, England.

Chemical Resistance Test Report

Notes - SGS laboratory conditions: 23±2°C, humidity: 50±5% RH

Test methods

1. Drop 0.5ml reagent on the surface of the material and immediately cover with a watch glass for 24 hours
2. After 24 hours, wipe and clean the surface of the material
3. Examine the surface of the material for colour change, blistering or swelling by visual inspection