- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Adheron Metal Primer Finish, a general purpose quick-drying anti-corrosive primer/finish for steel that can be applied by brush, roller or spray. Designed to give a tough but flexible primer/finish, the primer can be overcoated with conventional alkyd and chlorinated rubber finishes after just 4 hours. Additional coats of Tor Adheron Metal Primer may be applied as a finish.
- Touch dry in 1 hour - hard dry in 4 hours, ready to be recoated. Do not apply if relative humidity is likely to exceed 88%.
- Use Tor TH19 to thin where needed and to clean equipment. Refer below for more product information, preparation and application instructions
Description
Tor Adheron Metal Primer Finish is a general purpose quick-drying anti-corrosive primer/finish for steel, which can be overcoated with conventional alkyd and chlorinated rubber finishes after just 4 hours. Designed to give a tough but flexible primer/finish, additional coats of Tor Adheron Metal Primer may be applied as a finish.
Features & Benefits
- General purpose primer for steel
- Anti-corrosive, protecting metal from rust
- Applies by brush, roller or spray
- 1 coat primer
- Additional coats (2-3) can be used as a finish
- Tough but flexible primer/finish
- Overcoat with conventional alkyd and chlorinated rubber finishes
- Not suitable for overcoating with 2 pack finishes
- Good coverage, with up to 10 square metres per litre
- Touch dry in 1 hour - hard dry in 4 hours, ready to be recoated
- Do not apply if relative humidity is likely to exceed 88%.
- Refer below for more product information, preparation and application instructions
Product Information
A modified alkyd resin binder containing chlorinated rubber pigmented with inorganic pigments and thinned with Xylene. Designed to give a tough but flexible primer/finish.
| Product reference | AK608 |
| Volume solids | 43% |
| Typical thickness | 43 microns dft from 100 microns wet |
| Theoretical coverage | 10 square metres per litre |
| Practical coverage | Reduce above by up to 20% |
| Appearance | Satin Appearance |
| No. of coats | 1 coat as a primer, 2-3 coats as a finish. |
| VOC content | EU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC |
Surface Preparation
Steel:
Preferably grit blast to Sa2.5 Swedish Standard to remove all contaminants and provide a profile of 50-75 microns.
Application Details
| Mix ratio | N/A |
| Method of application | Brush, roller or airless spray. Tip size 0.015” and 2000 psi atomising pressure |
| Thinner | Tor TH19 (where necessary) |
| Cleaner | Tor TH19 for cleaning equipment |
| Pot Life | N/A |
Drying Times
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 1 hour | 4 hours | 4 hours | 14 days |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store the closed containers in a store room which is either in a safe place or is a fire resisting structure. The storage and conditions must meet the statutory requirements of The Highly Flammable Liquids and Petroleum Gases Regulations 1972.
Flash point
- 23°C
Shelf life
- 2 years in unopened containers
Limitations
Do not apply if relative humidity is likely to exceed 88%. Not suitable for overcoating with 2 pack finishes.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Product Details
4091-515324
Data sheet
- Manufacturer
- Tor Coatings
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, roller, steel
- Sheen
- Satin
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L, 5L
- Solvent
- A modified alkyd resin binder containing chlorinated rubber pigmented with inorganic pigments and thinned with Xylene.
- Mixing Ratio
- -
- Key Features
- Quick drying tough but flexible primer/finish, overcoating with alkyd & chlorinated rubber finishes; Additional coats can be used as a finish. Not suitable for overcoating with 2 pack finishes.
- Touch Dry (at 20°C)
- 60 mins
- Dry to Handle (at 20°C)
- 4 hours
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- 14 days
- Pot Life (at 20°C)
- -
- Coverage
- 10 square metres per litre
- Recommended Thinner/Cleaner
- Tor TH19
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Chlorinated rubber finishes
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 43%
- Heat Resistance (up-to)
- -
- VOC
- This product contains max 500 g/l VOC
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Flexible
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Primer/Finish
- Usages
- Overcoatable
- Usages
- Tough
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- Tor Industrial
- Colour Family
- Black
- Product Type
- Modified Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Flexible
- Product Attributes
- Tough
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Primer/Finish
- Product Attributes
- Overcoatable
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Adheron Metal Primer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Teamac Chlorvar Chlorinated Rubber Paint
2,400+ colours. Durable, chlorinated rubber coating. Ideal for high-resistance protective finishes. For metal, concrete, and wood surfaces. Robust chemical and water resistance. Superior resistance to saltwater, chemicals, and acids. Buy A Paint Colour Sample
Price
£108.91
(incl. VAT)
In Stock and Available for Delivery
Ennis-Flint Cataphos Chlorinated Rubber (Premium)
We will no longer be re-stocking this product, but can recommend Bradite Roadline RL52 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on...
Price
£64.88
(incl. VAT)
Last items in stock
Tor QD Thinner
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
Price
£42.89
(incl. VAT)
In Stock and Available for Delivery
Hydron Nu-Base Chlorinated Rubber
Nu-Base Chlorinated Rubber Floor paint is a fast drying finish based on chlorinated rubber resin, giving good adhesion and exterior durability. Good resistance to petrol, paraffin and mineral oil spillage For use on metal and concrete, and ideal for use in swimming and paddling pools RAL and BS colours available More Information...
Price
£174.86
(incl. VAT)
In Stock and Available for Delivery
Bradite Chlorinated Rubber
We no longer stock this product, but can recommend Teamac Chlorvar Chlorinated Rubber Paint as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...
In stock
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery