- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Torsan “A” Chlorinated Rubber Finish, a quick-drying chemical resistant finish for use where high humidity rules out conventional paints, such as in swimming pools, breweries, factories, abattoirs, etc.
- Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent
- The finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
- Clean equipment with Tor TH19
- Refer below for more product information, preparation and application instructions
Description
Tor Torsan “A” Chlorinated Rubber Finish is a quick drying chemical resistant finish for use in swimming pools, breweries, factories, abattoirs, etc, where high humidity rules out conventional paints.
The finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
Features & Benefits
- Chemical-resistant, chlorinated rubber finish
- Quick-drying - touch dry in 1 hour, hard dry in 3 hours
- See further below for drying times
- Ideal for use in high humidity areas, such as:
- Swimming pools
- Factories
- Abattoirs
- Breweries
- Good coverage up to 12.5 square metres per litre
- Only comparatively thin films result from this product; therefore multi coats may be required for adequate protection or “high build” types considered.
- Use with Tor TH25 for thinning when required
- Clean equipment with Tor TH19
- Dry film remains sensitive to solvents, oil and fats
- Refer below for more product information, preparation and application instructions
Product Information
Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent.
| Product reference | CR501 |
| Volume solids | 45% |
| Typical thickness | 35 microns dft from 80 microns wet |
| Theoretical coverage | 12.5 square metres per litre |
| Practical coverage | 10 square metres per litre |
| VOC content | EU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC |
Surface Preparation
Torsan “A” Chlorinated Rubber Finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
Application Details
| Mix ratio | N/A |
| Method of application | Brush or airless spray (0.015" tip and 2500 psi atomising pressure) |
| Thinner | Tor TH25 (when required) |
| Cleaner | Tor TH19 for cleaning equipment |
| Pot Life | N/A |
Drying Times
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 1 hour | 3 hours | 2-3 hours | Unlimited |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store in a safe place out of the reach of children
Flash point
- Above 32°C
Shelf life
- 2 years in unopened containers
Limitations
Dry film remains sensitive to solvents, oil and fats.
Only comparatively thin films result from this product and therefore multi coats may be required for adequate protection or “high build” types considered.
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Product Details
4099-515332
Data sheet
- Manufacturer
- Tor Coatings
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Brush, Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Parts
- 1
- Base Type
- Solvent
- Solvent
- Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent.
- Mixing Ratio
- -
- Suitable Substrates
- substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
- Key Features
- For use where high humidity rules out conventional paints, such as in breweries, swimming pools, factories, abattoirs, etc.
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- 2-3 hours
- Fully Cured (at 20°C)
- 3 hours
- Pot Life (at 20°C)
- -
- Coverage
- 12.5 square metres per litre
- Recommended Thinner/Cleaner
- Tor TH25 (thinner)/Tor TH19 (cleaner)
- Unit Contents
- -
- Compatible Primers
- Chlorinated rubber primer
- Compatible Topcoats
- -
- Max. Application Temperature
- -
- Min. Application Temperature
- -
- Density
- -
- Solids by Volume
- 45%
- Heat Resistance (up-to)
- -
- VOC
- Product contains max 500 g/l VOC
- Shelf Life (from date of manufacture)
- 2 years in unopened containers
- UN Number
- UN 1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Tor Industrial
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torsan A Chlorinated Rubber Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Tor QD Thinner
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
Price
£42.89
(incl. VAT)
In Stock and Available for Delivery
Tor HF Aromatic Thinners
We no longer stock this product, but can recommend Tor QD Thinner as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...
In stock
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery